Professional Documents
Culture Documents
Semestre 2018-II
ESTATICA
Copiar el texto completo traducido del problema indicando la numeración original, utilizando
MS Word, estilo Normal, fuente Times New Roman, tamaño 12.
Iniciar cada problema en hoja nueva, tipo bond A-4, indicando todos los pasos y cálculos
intermedios y finales de forma legible. Todo el trabajo se presentará físicamente en un file
manila A-4.
P1. Replace the two forces and one couple acting on the rigid pipe frame by their equivalent
resultant force R acting at point O and a couple Mo
P2. The horizontal top of a concrete column is subjected to the system of forces shown. Represent
the resultant of all forces as a force R at point O and a couple Mo. Also specify the magnitudes
of R and Mo.
P3. When the pole OA is in the position shown, the tension in cable AB is 3 kN. (a) Write the
tension force exerted on the small collar at point A as a vector using the coordinates shown. (b)
Determine the moment of this force about point O and state the moments about the x-, y-, and z-
axes. (c) Determine the projection of this tension force onto line AO.
3
P4. Reduce the given loading system to a force–couple system at point A. Then determine the
distance x to the right of point A at which the resultant of the three forces acts.
P6. Determine the coordinates of the mass center of the welded assembly of uniform slender rods
made from the same bar stock.
4
P7. Calculate the x-, y-, and z-coordinates of the mass center of the fixture formed from aluminum
plate of uniform thickness.
P8. Determine the volume V and total surface area A of the solid generated by revolving the area
shown through 180º about the z-axis