You are on page 1of 2

EG500 Ethernet FTTH/LAN Gateway

Next generation gigabit


residential gateway for
FTTH and LAN
networks

EG500 is the next generation gigabit


residential gateway for fiber to the home and
LAN networks. EG500 features dual mode autosensing
WAN (100/1000 Base-T Ethernet and 100/1000 Base-X SFP slot),
four Gigabit Ethernet LAN ports, two FXS POTS ports, two USB
host 2.0 and 802.11n WiFi with integrated 2x2 antenna design.

Key features

• Auto sensing combo WAN • Two FXS ports for VoIP

• Electrical 100/1000 Base-T Ethernet port • Remote management via HTTP, TFTP or TR-069

• 100/1000 Base-X SFP autosensing port • Supports TR-069, TR-104 management

• Four Gigabit Ethernet LAN • Based on Broadcom 6818 CPU

• 802.11n WiFi • Flexible choice of WAN port, copper or fiber (SFP)

• Two USB host 2.0


Specifications, hardware

Local Interface OAM Power


• Four 10/100/1000 Base-T Ethernet ports • Through Web browser, remotely • 12V DC 2A
or locally
• Integrated 802.11n WLAN Access Point • Power consumption in accordance with
with internal antennas, backward • One hidden console port (RS-232) EU CoC Broadband equipment
compatible with 802.11b/g for maintenance
Physical Dimensions
WAN Interface Environment • ( 240 × 170 × 47 )
• Electrical 10/100/1000 Base-T • Operation Temperature: 0°C ~ 45°C
Ethernet port
• Operation Humidity: 5% ~ 95%
• 100/1000 Base-X SFP autosensing port (non-condensing)

Analog Voice Interface • Storage Temperature: -20°C ~ +85°C


• Two FXS ports with RJ-11
• Storage Humidity: 5% ~ 95%
(non-condensing)

Specifications, software

Routing Voice Configuration and


• Supports Point-to-Point Protocol and • Supports voice CODECs like G.711, Network Management
user authentication via PAP, CHAP or G.726, G.729A, G.722, BV16, • SNMP GET, SET and TRAPs for four
MS-CHAP ILBC, T.38 etc groups in MIB-II

• Routing Information Protocol (RIP) v1 • G.168 line echo cancellation with pro • Embedded syslog
and v2, static route grammable tail
• UPnP Internet Gateway Device (IGD)
• DHCP client, server and relay agent • Adaptive jitter buffer, packet loss conce compliance
alment (PLC), voice activity detection
• NAT / PAT – RFC1631 with support for (VAD), comfort noise generation (CNG) • Management and configuration via
extensive ALGs and Caller ID Web/ HTTP

• DNS relay • DTMF tone detection and generation; • Firmware upgrade via HTTP, TFTP
Fax / Modem detection and or TR-069
Firewall passthrough VoIP and Telephony
• NAT, DMZ and ALGs Supplementary Services • Supports TR-069/098

• Stateful Packet Inspection (SPI) with • Supports SIP (RFC3261), SDP • Supports TR-104
DOS protection - Ping of Death, SYN (RFC2327, RFC3264) using TCP or
Flood LAND UDP transport • Supports TR-111 part 1

• Protection against IP and MAC • Supports User Agent Client (UAC) - • Supports TR-140
address spoofing User Agent Server (UAS) call, or proxy
call routing
• UPnP NAT traversal and VPN / IPSec
pass-through • Supports SIP and telephone URL Note: Not every listed feature will be
addressing included in the shipping product. We
Wireless reserve the right to make changes of
• Supports 802.1x; WEP; WEP2; WPA; • Supports in-band DTMF tone sending/ technical specifications, housing or
TKIP; AES; 802.11i receiving and out-band DTMF signaling design without prior notice.
with RTP, as per RFC2833
• Hidden SSID

• WMM for advanced Quality of Service

• AES in hardware

Inteno Broadband Technology AB Drivhjulsvägen 22 | 126 30 Hägersten, Stockholm | Phone: +46-8-579 190 00 | Fax: +46-8-579 190 01 | info@inteno.se | www.inteno.se

You might also like