Professional Documents
Culture Documents
INSTALL GUIDE
HDBASET™ EXTENDERS
NDS-371HD-TX NDS-372HD-RX
NDS-371HD-TX NDS-372HD-RX
IR In IR Out HDMI In HDBaseT Out DC 12V IR In IR Out HDMI Out HDBaseT In DC 12V
www.absoluteacoustics.com
NDS-370HD
DESCRIPTION NDS-371HD-TX....................................03
SURGE PROTECTION DEVICE RECOMMENDED
DESCRIPTION NDS-372HD-RX..................................03
This product contains sensitive electrical components that may
INSTALLATION INSTRUCTIONS..............................04 be damaged by electrical spikes, surges, electric shock, lightning
QUICK SETUP GUIDE...........................................04 strikes, etc. Use of surge protection systems is highly recommen-
ded in order to protect and extend the life of your equipment.
ABOUT HDBaseT™ CABLING...........................04
SPECIFICATIONS...............................................................06 Do not substitute or use any other power supply other than the
enclosed unit, or a Absolute Acoustics® approved replacement.
PACKAGE CONTENTS....................................................07
WARRANTY NOTICE
DISCLAIMER NOTICE
www.absoluteacoustics.com 01
NDS-370HD
Introduction
Absolute Acoustics® NDS-370HD is a Class B HDMI over HDBaseT™ extender set capable of transmitting HDMI and control signals for
distances up to 230ft (70m) over a single twisted-pair cable. 370HD is capable to extend 1080p video up to 230ft (70m) and 4K/UHD
video up to 130ft (40m) with embedded multi-channel audio and bi-directional IR control signals. Both TX and RX units can be remo-
tely powered by PoC technology requiring a single power supply per kit, and easing up the installation.
KEY FEATURES
• Transmission of HDMI, control signals and • Allow the pass-thru of HDMI-CEC commands,
electrical power for distances up to 230ft (70m) at enabling user to control the entire system with a
1080p resolutions, or 130ft (40m) at 4K/UHD single remote;
resolutions over a single twisted pair cable.
• IR extension ports, allowing long-range control
• Compatible with the new ultra-high definition signals transmission over a single cable;
sources and displays, sending signals with
resolutions up to 4096/3840x2160@30 with 4:4:4 or • HDBaseT™ outputs provides electrical power
4096/3840x2160@60 with 4:2:0 color format. supply to the remote receiver units through the
same CAT cable, making the deployment process
• Fully licensed and compatible with HDCP 2.2, the much easier;
latest content protection specification, enabling
the transmission of ultra-high definition signals • Slim design, allowing easy installation behind TVs
directly from the source. or in furniture.
www.absoluteacoustics.com 02
NDS-370HD
Description — NDS-371HD-TX
1
2 3 4 5
Description — NDS-372HD-RX
1
2 3 4 5
www.absoluteacoustics.com 03
NDS-370HD
Installation Instructions
1. Begin with the NDS-370HD units and all external devices Warning
turned off and with power cables removed.
All devices should be unplugged from
electrical supply prior to begin the
2. Place the TX and RX units at the installation sites, respecting installation. Damages caused due to misuse
the minimum spaces for ventilation. are not covered by the product warranty.
3. Connect the source device to the input port of the TX unit, and
the HDMI display to the HDMI output port of the RX unit.
Tip
4. Connect the HDBaseT™ link cable between the TX and RX units, Before permanently securing the unit for
using a quality twisted pair cable. final installation, test for proper operation
of the unit and cables in your system.
7. Connect external devices to the power supply and turn they on.
Sending HDMI signals (specially at 4K/UHD resolutions) through HDBaseT™ technology is highly sensitive to the quality of cabling and
installation techniques. Thus, we strongly recommend the use of solid conductors CAT6 twisted-pair cables (or higher). The
transmission distances for each kind of cable are listed in the table below.
Note: The distances in the table above are consistent with ideal installation
conditions. In a real application, the transmission distances may vary due to 1
installation conditions. Always work with a safety factor.
For termination, the 568B standard is recommended use the appropriate connector 8
with its matching cable.
EIA / TIA-568B
www.absoluteacoustics.com 04
NDS-370HD
The IR extension ports on Absolute® HDBaseT™ extenders can be used to extend the reach of control signals to further distances while
using the same cable for the HDMI signal data traffic. Each IR In port communicates direclty on the matching IR Out port in the remote
unit. The pinout used for each connection is described below:
Signal Signal
Ground Ground
12V
IR in IR out
www.absoluteacoustics.com 05
NDS-370HD
Specifications
NDS-371HD-TX NDS-372HD-RX
SUPPORTED Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD Master Audio, DTS 5.1,
AUDIO FORMATS PCM 2 - 8 Ch
CONTROL SIGNALS
EXTENSION Bi-directional IR, RS232
MAXIMUM TRANSMISSION
DISTANCE
197ft (60m) over CAT5e/6 cable; 230ft (70m) over CAT6a/7 cable
OPERATING
32° to 104° F (0° - 40°C) 32° to 104° F (0° - 40°C)
TEMPERATURE
4.53x0.63x3.26in 4.53x0.63x3.26in
DIMENSIONS
(115x17x84mm) (115x17x84mm)
POWER CONSUMPTION 11W per TX/RX pair 11W per TX/RX pair
NOTES 1. 3840x2160 and 4096x2160 resolutions are only supported with YCbCr 4:2:0 Color Format.
2. 3840x2160 and 4096x2160 resolutions are only supported with in 8 bit/ch Color Depth.
www.absoluteacoustics.com 06
NDS-370HD
Package Contents
NDS-371HD-TX
1x NDS-371HD-TX
1x 12VDC/2A power supply
4x Regional adapter plugs
4x Rubber feet
1x Warranty certificate
NDS-372HD-RX
1x NDS-372HD-RX
4x Rubber feet
1x Warranty certificate
www.absoluteacoustics.com 07