Professional Documents
Culture Documents
40:001
August 2002 Sliding-Stem Valve Selection Guide
W6374/IL
W6564-1B/IL
W7012/IL
www.Fisher.com
Product Bulletin
40:001
Sliding-Stem Valve Selection Guide August 2002
General service for controlling liquids and easy-er heavy-duty general service for
controlling liquids and gases, including viscous easy-e heavy-duty, general-service and severe
gases, with severe service capability and
and other hard-to-handle fluids. UOP service valve for clean liquids and gases
extensive range of alloy materials
applications.
Style
Single-seated, post-guided globe or angle valve.
Cage-guided globe or angle valve
Single-port with integral flanges, stem-guided, Unbalanced
Unbalanced trim
seat retainer, quick-change trim Seat retainer
Cage-retained seat
Metal or soft seats
Sizes
Design ES: 1/2 through 8 inches
1/2 through 4 inches 1/2 through 4 inches
Design EWS: 4 x 2 through 12 x 8 inches
Ratings
Design ES: ANSI Class 150, 300, or 600
ANSI Class 150 and 300 ANSI Class 125, 300, or 600
Design EWS: ANSI Class 300, 600, or 900
End Connections
Screwed NPT female, flat- or raised-face Screwed NPT female, flat- or raised-face
Integral raised-face flanges flanged, ring-type joint, socket-weld, and flanged, ring-type joint, socket-weld, and
buttwelding ends buttwelding ends
Valve Body Materials
1/2 and 3/4 inch: stainless steel (to ASME or
ASTM specifications)
Cast iron, steel, alloy steel, stainless steel (to Cast iron, steel, alloy steel, stainless steel (to
1 through 4 inch: steel, 316L stainless steel,
ASME, ASTM, or DIN specifications) ASME, ASTM, or DIN specifications)
alloy 20, Monel, Hastelloy, 304L (to ASME or
ASTM specifications)
Valve Plug and Seat Ring (Trim) Materials
1/2 and 3/4 inch (stainless steel with or without
Stainless steel with or without alloy 6 on seat or Stainless steel with or without alloy 6 on seat or
alloy 6 on plug/stem
seat and guide seat and guide
1 through 4 inch (stainless steel with or without
Soft seat is PTFE Soft seat is PTFE
alloy 6 on seat)
Flow Characteristics and Maximum Flow Coefficients
Equal percentage or linear Quick opening, linear, or equal percentage Quick opening, linear, or equal percentage
Maximum Cv from 2.63 to 195 Maximum Cv from 4.47 to 190 Maximum Cv from 6.53 to 1110
Shutoff Class (ANSI/FCI 70-2 and IEC 60534-4)
1/2 and 3/4 inch (Class IV standard with metal
seats, Class V optional with metal seats) Class IV (standard with metal seats), Class V Class IV (standard with metal seats), Class V
1 through 4 inch (Class IV standard with metal (optional with metal seats), or Class VI (with (optional with metal seats), or Class VI (with
seats, Class V optional with metal seats, or optional soft seats) optional soft seats)
Class VI with optional soft seats)
Available Actuator Types (see section on Fisher Sliding-Stem Valve Actuators)
System 9000 FloVue final control system; Type System 9000 FloVue final control system; Type System 9000 FloVue final control system; Type
657 or Type 667 spring and diaphragm; 657 or Type 667 spring and diaphragm; 657 or Type 667 spring and diaphragm;
Type 585C or 585CR piston Type 585C or 585CR piston Type 585C or 585CR piston
2
Product Bulletin
40:001
August 2002 Sliding-Stem Valve Selection Guide
DESIGN ED (see figure 3) DESIGN ET (see figure 3) DESIGNS HP and EH (see figure 3)
Applications
easy-e heavy-duty, general and severe service
easy-e heavy-duty, general and severe service
valve for tight shutoff with clean liquids and
valve for clean liquids and gases with higher For high-pressure and severe service
gases with higher pressure drops and
pressure drops but where tight shutoff is not applications
temperatures to 450_F (to 600_F with optional
required.
seal materials)
Style
Cage-guided globe or angle valve Cage-guided globe or angle valve
Cage-guided globe or angle valve
Balanced trim Balanced trim
Balanced or unbalanced trim
Cage-retained seat Cage-retained seat
Sizes
Design ED: 1/2 through 8 Design ET: 1/2 through 8 Design HP: 1 through 6 inches
Design EWD: 4 x 2 through 24 x 20 inches Design EWT: 4 x 2 through 24 x 20 inches Design EH: 1 through 20 inches
Ratings
Design ED: ANSI Class 150, 300, or 600 Design ET: ANSI Class 125, 300, or 600 ANSI Class 900, 1500, 2500, or intermediate
Design EWD: ANSI Class 300, 600, or 900 Design EWT: ANSI Class 300, 600, or 900 ANSI ratings
End Connections
Screwed NPT female, flat- or raised-face Screwed NPT female, flat- or raised-face Raised-face flanged, ring-type joint,
flanged, ring-type joint, socket-weld, and flanged, ring-type joint, socket-weld, and socket-weld, and buttwelding ends
buttwelding ends buttwelding ends Expanded ends
Valve Body Materials
Cast iron, steel, alloy steel, stainless steel (to Cast iron, steel, alloy steel, stainless steel (to Cast iron, steel, alloy steel, stainless steel (to
ASME, ASTM, or DIN specifications) ASME, ASTM, or DIN specifications) ASME, ASTM, or DIN specifications)
Valve Plug and Seat Ring (Trim) Materials
Stainless steel with or without alloy 6 on seat or
Stainless steel with or without alloy 6 on seat or Stainless steel with or without alloy 6 on seat or
seat and guide
seat and guide seat and guide
Soft seat is PTFE
Flow Characteristics and Maximum Flow Coefficients
Quick opening, linear, or equal percentage Quick opening, linear, or equal percentage Linear, equal percentage, or characterized
Maximum Cv from 17.2 to 6500 Maximum Cv from 17.2 to 6500 Maximum Cv from 0.354 to 2600
Shutoff Class (ANSI/FCI 70-2 and IEC 60534-4)
Standard Air Test: 0.05 mL/min/psid/inch of
Class II (standard)
port diameter (standard with soft seat) Class II, III, IV, or V (depending on size and
Class III or IV (optional depending on size)
Class IV (standard with metal seats), Class V construction)
Class V (w/ C-seal trim)
(optional with soft or metal seats)
Available Actuator Types (see section on Fisher Sliding-Stem Valve Actuators)
System 9000 FloVue final control system; Type System 9000 FloVue final control system; Type
Type 657 or Type 667 spring and diaphragm;
657 or Type 667 spring and diaphragm; 657 or Type 667 spring and diaphragm;
Type 585C, 585CR, or 585C Long-Stroke piston
Type 585C or 585CR piston Type 585C or 585CR piston
3
Product Bulletin
40:001
Sliding-Stem Valve Selection Guide August 2002
Fisher Sliding-Stem Valves (YD, YS, RSS, ET-C, EWT-T, and EZ-C)
W0665-3/IL W6397-1/IL
W4521-2/IL
DESIGNS YD and YS DESIGN RSS DESIGNS ET-C, EWT-C, and EZ-C
Figure 4. Fisher Sliding-Stem Valves (YD, YS, RSS, ET-C, EWT-C, and EZ-C)
4
Product Bulletin
40:001
August 2002 Sliding-Stem Valve Selection Guide
W7013-1/IL
W7014-1/IL W7015-1/IL
DESIGN CVX-A (see figure 5) DESIGN CVX-C (see figure 5) DESIGN CVX-P (see figure 5)
Applications
Process steam and other small to moderate Turbine bypass, condenser dump, and other Any turbine bypass, condenser dump, or
water-flow applications moderate to large water-flow applications process steam application.
Style
Angle steam conditioning valve with spraywater
Angle steam conditioning valve with multiple
injected in the direction of steam flow
spray nozzles injecting water radially from an
immediately downstream of the seat where
externally mounted manifold. Water is injected
velocity and turbulence are high. High velocity
downstream of the seat where turbulence is Angle valve for steam pressure reduction only.
and turbulence helps mix the water quickly and
high. High turbulence helps ensure quick and Also available in Z- or Y-pattern designs.
evenly throughout the steam flow. Design allows
even mixing throughout the flow. Multiple
for intrinsic feedforward control due to the direct
nozzles allow for large water-flow addition. Also
proportioning of water addition to steam flow.
available in Z- or Y-pattern designs.
Also available in Y-pattern design.
Sizes
Steam: 1- through 20-inch inlet, with 2- through Steam: 1- through 24-inch inlet, with 2- through
Steam: 1- through 24-inch inlet with 2- through
42-inch outlet. 48-inch outlet
48-inch outlet.
Spraywater: 1, 1-1/2, or 2-inches Spraywater: 1- through 4-inches
End Connections and Ratings
ANSI socket-weld: 1- through 3-inches ANSI socket-weld: 1- through 3-inches
ANSI socket-weld: 1- through 3-inches
ANSI buttwelding and raised-face flanged: ANSI buttwelding and raised-face flanged:
ANSI buttwelding and raised-face flanged:
All sizes All sizes
All sizes
Ratings: ANSI Class 150 through 4500 Ratings: ANSI Class 150 through 4500
Ratings: ANSI Class 150 through 1500
(intermediate and special classes also available) (intermediate and special classes also available)
Flow Characteristic
Linear, equal percentage, or special Linear, equal percentage, or special Linear, equal percentage, or special
Flow Coefficients
Maximum Cv from 15 to 2000 Maximum Cv from 15 to 6400 Maximum Cv from 15 to 6400
Rangeability
50 to 1 50 to 1 50 to 1
Shutoff Class (ANSI/FCI 70-2 and IEC 60534-4)
Class IV Class IV (standard) or Class V (optional) Class IV (standard) or Class V (optional)
Valve Body and Bonnet Material and Construction
Forged and machined body made of SA105 carbon steel, F11 chrome moly steel, or F22 chrome moly steel (similar to C22.8, 13 Cr Mo44, and
10 Cr Mo910, respectively). Special materials such as F91 or stainless steel are available upon request.
Available Actuator Types (see section on Fisher Sliding-Stem Valve Actuators)
Type 585CR and 585C Long-Stroke piston. Other actuators including electric and electro-hydraulic are also available.
5
Product Bulletin
40:001
Sliding-Stem Valve Selection Guide August 2002
6
Product Bulletin
40:001
August 2002 Sliding-Stem Valve Selection Guide
Figure 7. Fisher Sliding-Stem Valve Actuators (585C Long-Stroke, 655, and 1008)
TYPE 585C LONG–STROKE (see figure 7) TYPE 655 (see figure 7) TYPE 1008 (see figure 7)
Features
Manual handwheel for applications that require
Heavy-duty actuators for large valves and
Actuators for pressure regulation applications a throttling type of control valve that can be
valves with long travel
manually operated and set
Style
Double-acting piston Pressure-actuated, spring-and-diaphragm Manual handwheel actuator
Typical Maximum Thrust, Lbf (Varies with Operating Pressure, Spring, and Construction)
25,000 @ 125 psig operating pressure 17,000
Accessories
I/P transducers, pneumatic valve positioners,
Travel indicator, top-mounted
limit switches, position transmitters, Handwheel lock, Tejax valve stem position
handwheel/adjustable travel stop, stem seal
handwheels, travel stops, and supply pressure indicator
and drain tapping for leakoff
filter-regulator
D Fisher has combined its knowledge of metals and foundry techniques with valve user experience in
creating high alloy valves that fight corrosion successfully.
D Fisher has developed guidelines to help the valve user specify alloy valves correctly. Fisher has also
implemented techniques that verify a foundry’s ability to cast alloy valves properly and has established
stringent specifications that guide the foundry in providing quality results.
D Valve user guidelines include—Avoid the use of alloy tradenames, Don’t specify wrought for cast,
Forego non-destructive testing
D Steps Fisher uses to qualify a foundry include—Weldability tests to gauge the foundry’s ability to
pour alloy materials, Dedicating casting patterns solely to high-alloy service
7
Product Bulletin
40:001
Sliding-Stem Valve Selection Guide August 2002
W6507-1 / IL
W6255/IL
W6307-1/IL
FIELDVUE DIGITAL VALVE
CONTROLLER MOUNTED ON TYPE
667 ACTUATOR AND easy-e VALVE TYPE 846 ELECTRO-PNEUMATIC
W5500-1/IL
TRANSDUCER MOUNTED ON A
TYPE 667 ACTUATOR
D Fisher offers a complete line of actuators and accessories for Fisher sliding-stem valves that meet
your price/performance expectations
D FIELDVUE digital valve controllers are communicating, microprocessor-based controllers that utilize
HARTr and FOUNDATIONt fieldbus protocols. Through digital communications, the controllers give
easy access to actuator, valve, and instrument information that is critical to process operation.
D ValveLinkt software and Asset Management Solution software allows you to care for and maintain
equipment assets—such as valves, transmitters, analyzers, motors, pumps, etc. and plant unit equipment
such as pipes, vessels, tanks, columns, reactors, digesters, etc.—to improve yields and minimize
downtime of industrial manufacturing processes.
D Contact your Fisher sales office for details
easy-e, Cavitrol, ENVIRO-SEAL, FIELDVUE, FloVue, HIGH-SEAL, ValveLink, Whisper Trim, and Fisher are marks owned by Fisher
Controls International, Inc., a business of Emerson Process Management. The Emerson logo is a trademark and service mark of Emerson
Electric Co. All other marks are the property of their respective owners. HART is a mark owned by the HART Communications Foundation.
FOUNDATION fieldbus is a mark owned by the Fieldbus Foundation. This product may be covered by one or more of the following patents:
5,129,625; 5,131,666; 5,056,757; 5,230,498; and 5,299,812 or under pending patents.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy,
they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use
or applicability. We reserve the right to modify or improve the designs or specifications of such products at any time without notice.
Fisher does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use and
maintenance of any Fisher product remains solely with the purchaser and end-user.
EFisher
8 Controls International, Inc. 1997, 2002; All Rights Reserved Printed in USA