Professional Documents
Culture Documents
1830 PSS-32/16
(Photonic Service Switch – 32/16)
New Network Element Software Installation
Optics GPEC Certification Program
Release 5.1
October 2012
New Network Element Software Installation
Overview:
To provide a complete step by step process to install Release 5.1 system
software on a new 1830PSS-32/16 network element
References:
Release 5.1 Installation Engineering Handbook IEH 600
Release 5.1 Customer Release Notes
Release 5.1 Installation and System Turn-up Guide
Chapter 1:
Internet Explorer configuration
Java configuration
FTP root path and software folder configuration
3Com 3CDaemon configuration
2
New Network Element Software Installation
Chapter 2:
Integration Prerequisites prior to software installation
Network Element turn-up steps prior to software installation
Network Element connection for WebUI access
Network Element connection for CLI access
Chapter 3:
Starting the 3Com 3CDaemon FTP server
Configuring the FTP server settings on the network element
Performing the Software Audit
Performing the Software Download
Performing the Software Activation
Clearing the Database
Committing the Software
3
New Network Element Software Installation
Chapter 4:
Verifying the software installation
Sequence of the remaining turn-up steps
Redundant Equipment Controller (EC) card
4
Do not delete this graphic elements in here:
Configurations for:
Internet Explorer, Java,
FTP root / R5.1 Software,
and 3Com 3CDaemon
Chapter 1 Internet Explorer
Internet Explorer Details
Supported Internet Explorer Versions: 6, 7, and 8
Turn Off Internet Explorer Pop-up Blocker
Tools>Internet Options>Privacy
Turn Off any other Tool Bar Pop-up Blockers
Turn Off any active LAN proxy
Turn On LAN Automatically Detect Settings
Tools>Internet Options>Connections>LAN Settings
Reference:
IEH 600, Section 200, Pre-Installation Tasks
6
Chapter 1 Java
Java Details
Supported Java Version: 6, any Update Level
Control Panel>Java>About
Update 10 and higher must have the “Enable Next-
Generation Java Plug-in” Unchecked
Default Java for Browsers must have Internet Explorer
checked Control Panel>Java>Advanced
Reference:
IEH 600, Section 200, Pre-Installation Tasks
CRN R5.1, Chapter 2, WebUI Issue # 18168
7
Chapter 1 FTP root path and software folder
FTP root path
Create a root folder directly on the hard drive (FTProot) for the NE software loads
Copy the 1830PSS-32 R5.1 NE software folder (1830PSS32-5.1-0) into the new FTProot folder
Examples shown
represent the file
structure for R5.0
Reference:
IEH 600, Section 200, Software Installation
8
Chapter 1 3Com 3CDaemon FTP Server
FTP Server
3Com 3CDaemon always starts up with displaying the TFTP server
Click on the FTP Server button in the lower left area to display the FTP server
Click on Configure FTP Server to enter the profile name, password, permissions, and User Directory
Example
9
Reference:
IEH 600, Section 200, Software Installation
Do not delete this graphic elements in here:
Integration Prerequisites
NE Turn-up Steps
NE Connection for WebUI
NE Connection for CLI
Chapter 2 Prerequisites prior to software installation
• Verify that all of the items on the Network Element Checklist are
complete.
• Verify that all of the steps in the NE Turn Up pages are complete.
Reference:
IEH 600, Section 200, Integration Prerequisites, NE Turn Up, and NE Connection
11
Chapter 2 Prerequisites prior to software installation
NE Connection
Reference:
IEH 600, Section 200, NE Connection
12
Chapter 2 Prerequisites prior to software installation
NE Connection
Verify that you can ping the EC card /CIT port (172.16.0.1)
Reference:
IEH 600, Section 200, NE Connection
13
Chapter 2 Prerequisites prior to software installation
NE Connection: WebUI
Verify that you can login to the NE from WebUI
Enter the CIT IP Address 172.16.0.1 in the Address Bar of Internet Explorer
Enter the User and Password both as admin
Reference:
IEH 600, Section 200, NE Connection
14
Chapter 2 Prerequisites prior to software installation
NE Connection: CLI
Verify that you can login to the NE from CLI
First Login/Password
Are both cli
Password will not echo
Second Login/Password
Are both admin
Password will not echo
Reference:
IEH 600, Section 200, NE Connection
15
Chapter 2 Prerequisites prior to software installation
Reference:
IEH 600, Section 200, Software Installation
CRN R5.1, Chapter 3, Software Installation
16
Chapter 2 Prerequisites prior to software installation
EC card with 1830PSS-0.32-1 Factory Load and No Existing Database
Reference:
IEH 600, Section 200, Software Installation
CRN R5.1, Chapter 3, Software Installation
17
Chapter 2 Prerequisites prior to software installation
EC card with 1830PSS-0.32-1 Factory Load and Existing Database
Existing NE Name
EC card Software Version
Proceed to Software Upgrade
Reference:
IEH 600, Section 200, Software Installation
CRN R5.1, Chapter 3, Software Installation
18
Do not delete this graphic elements in here:
Starting the 3Com 3CDaemon FTP server
Configure the FTP server settings on the NE
Performing the Software Audit
Performing the Software Download
Performing the Software Activation
Clearing the Database
Committing the Software
Chapter 3 Starting the 3Com 3CDaemon FTP Server
Reference:
IEH 600, Section 200, Software Installation
CRN R5.1, Chapter 3, Software Installation
20
Chapter 3 Configure the FTP Server Settings on the NE
Important – The PSS-16 Downloads Must Be Performed using CLI commands
listed in the Customer Release Notes.
The PSS-32 Downloads can be performed by either WebUI or CLI
Reference:
IEH 600, Section 200, Software Installation
CRN R5.1, Chapter 3, Software Installation
21
Chapter 3 Performing the Software Audit
Example shown
represents R5.0
Example shown
represents R5.0
Reference:
IEH 600, Section 200, Software Installation
CRN R5.1, Chapter 3, Software Installation
23
Chapter 3 Performing the Software Download
Example shown
represents R5.0
Reference:
IEH 600, Section 200, Software Installation
CRN R5.1, Chapter 3, Software Installation
24
Chapter 3 Performing the Software Download
Example shown
represents R5.0
Reference:
IEH 600, Section 200, Software Installation
CRN R5.1, Chapter 3, Software Installation
25
Chapter 3 Performing the Software Download
Reference:
IEH 600, Section 200, Software Installation
CRN R5.1, Chapter 3, Software Installation
26
Chapter 3 Performing the Software Download
Example shown
represents R5.0
Reference:
IEH 600, Section 200, Software Installation
CRN R5.1, Chapter 3, Software Installation
27
Chapter 3 Performing the Software Activation
Reference:
IEH 600, Section 200, Software Installation
CRN R5.1, Chapter 3, Software Installation
29
Chapter 3 Clearing the Database
Reference:
IEH 600, Section 200, Software Installation
CRN R5.1, Chapter 3, Software Installation
30
Chapter 3 SDH Mode
Reference:
IEH 600, Section 200, Software Installation
31
Chapter 3 Committing the Software
Reference:
IEH 600, Section 200, Software Installation
CRN R5.1, Chapter 3, Software Installation
32
Chapter 3 Committing the Software
Example shown
represents R5.0
Reference:
IEH 600, Section 200, Software Installation
CRN R5.1, Chapter 3, Software Installation
33
Chapter 3 Committing the Software
Example shown
represents R5.0
Reference:
IEH 600, Section 200, Software Installation
CRN R5.1, Chapter 3, Software Installation
34
Do not delete this graphic elements in here:
Example shown
represents R5.0
Reference:
IEH 600, Section 200, Software Installation
CRN R5.1, Chapter 3, Software Installation
36
Chapter 4 Verifying the Software Installation
Example shown
represents R5.0
Reference:
IEH 600, Section 200, Software Installation
CRN R5.1, Chapter 3, Software Installation
37
Chapter 4 Sequence of the Remaining Turn-up Steps
1. Resume with the IEH 600, Section 200, Network Element Setup to complete the
remaining NE turn-up tasks.
Reference:
IEH 600, Section 200, Network Element Setup
38
Chapter 4 Redundant Equipment Controller (EC) Card
Reference:
IEH 600, Section 200, Network Element Setup
39