Professional Documents
Culture Documents
ANNEX V
FE - D
Fuel Specifications
Edition: 01
Date: 2017
REPUBLIC OF DIESEL 50ppm Page: 1 of 3
MOZAMBIQUE
Limits
Specifications Unit Min. Max. Method*)
Density @15°C ………………………… To be To be IP235 D1298/ ASTM
reported reported
D4052/ ISO3675/
Kg/l (a)
ISO12185
Density @20°C ………………….……. 0,8150 0,8470
ASTM D7371/EN
14078/
Content of EMAG (Fatty Acid Methyl Ester) %V/V
- undetectable
by volume (C)
…………………………………
ANNEX V
FE - D
Fuel Specifications
Edition: 01
Date: 2017
DIESEL 50ppm Page: 2 of 3
REPUBLIC OF
MOZAMBIQUE
Limits
Specifications Unit Min. Max. Method
Flash point …………………………………… °C 60 ASTM D93/ISO2719
ANNEX V
FE - D
Fuel Specifications
Edition: 01
Date: 2017
REPUBLIC OF DIESEL 50ppm Page: 3 of 3
MOZAMBIQUE
Limits
Specifications Unit Min. Max. Method*)
Electrical conductivity pS/m 100 ASTM D2624
Footnotes:
*) In case of difference, the first test method indicated should serve as a reference.
(a) The density at 15oC will be determined by conversion through Conversion Tables ISO 91-
2 or according to the IP Petroleum Measurement Paper no. 3
(b) The demonstration of compliance with only one of the characteristics is sufficient: The
cetane number or cetane index. If cetane improving additives are used, the cetane number
should be greater than or equal to the value in parenthesis (45).
(c) FAME (Fatty Acid Methyl Esters) which is part of the composition of Biodiesel.
In case of diesel imported to the country, the FAME content in % by volume will be zero or
below the limit of detection by the indicated method. For sales in Mozambique, the increase
of biodiesel in accordance with standards EN 14214 / ASTM D6751, up to a maximum of 5%
by volume or in accordance with the specific regulations on the matter, will be allowed.