Professional Documents
Culture Documents
Nagpur (Maharashtra)
Summary Sheet
Note: Percentage should not quoted anywhere else except this summary page
QUOTE % ON % ON EST.
Sr.
Particulars ESTIMATE AMOUNT COST AMOUNT AMOUNT(W/o GST QA+GST& Labour Cess
COST(W/O
@ 13% (With GST
No.
& LABOUR Cess) GST & LC) & LC)
1 Civil Works 375 35 39 384.94 301 40 45 008 372 26 78 833 420 66 27 081 23.51 12.07
Total Cost 555 72 77 851.94 465 51 53 476 539 51 56 013 609 65 26 294 9.70
Page 1 of 85
Project Name: Construction of Hospital & Academic Campus at AIIMS Nagpur
ABSTRACT OF COST (Civil Work)
Amount (Rs)
S.No DESCRIPTION OF DSR AMOUNT NSR AMOUNT Total Estimate Cost Amount Cost Amount Total Cost Quote Quote Amount Total Quote % on % on
WORK (DSR) (Non DSR) Amount Amount (DSR) (Non DSR) Amount Cost Est.
1 Earth Work 9 59 17 943.28 0.00 9 59 17 943.28 7 68 30 479 0 7 68 30 479 9 33 73 552 0 9 33 73 552 21.53 - 2.65
2 Concrete Work 5 18 36 439.80 0.00 5 18 36 439.80 3 25 37 409 0 3 25 37 409 4 09 98 438 0 4 09 98 438 26.00 - 20.91
3 Reinforced Cement Concrete 124 99 48 490.35 11 86 52 690.00 136 86 01 180.35 95 51 51 053 9 09 48 000 104 60 99 053 120 28 21 897 10 73 18 640 131 01 40 537 25.24 - 4.27
4 Brick Work 17 90 97 886.85 1 70 97 612.00 19 61 95 498.85 12 76 15 063 1 51 25 372 14 27 40 435 16 07 84 432 1 90 57 571 17 98 42 003 25.99 - 8.34
5 Stone Work 41 97 845.00 0.00 41 97 845.00 30 84 900 0 30 84 900 38 86 550 0 38 86 550 25.99 - 7.42
6 Marble and Granite Works 14 56 07 512.70 0.00 14 56 07 512.70 12 28 79 652 0 12 28 79 652 15 48 42 116 0 15 48 42 116 26.01 6.34
7 Wood and PVC Works 8 85 99 814.10 6 95 71 396.00 15 81 71 210.10 7 17 60 655 4 42 71 966 11 60 32 621 8 62 26 936 5 27 53 428 13 89 80 364 19.78 - 12.13
8 Steel Work 2 31 02 779.90 0.00 2 31 02 779.90 1 89 82 080 0 1 89 82 080 2 24 57 688 0 2 24 57 688 18.31 - 2.79
9 Flooring Works 13 76 62 032.49 1 01 72 199.91 14 78 34 232.40 10 14 86 855 63 59 226 10 78 46 081 12 78 07 677 75 06 066 13 53 13 743 25.47 - 8.47
10 Acoustical Works 0.00 4 28 95 344.91 4 28 95 344.91 0 3 14 78 796 3 14 78 796 0 3 67 96 531 3 67 96 531 16.89 - 14.22
11 Roofing Works 13 76 37 237.91 78 68 300.00 14 55 05 537.91 9 08 09 409 71 92 900 9 80 02 309 10 92 59 317 84 87 600 11 77 46 917 20.15 - 19.08
12 Finishing 13 77 41 682.77 18 95 400.00 13 96 37 082.77 12 01 87 582 20 25 000 12 22 12 582 14 87 93 917 24 30 000 15 12 23 917 23.74 8.30
13 Waterproofing 6 88 53 609.42 1 28 76 082.74 8 17 29 692.16 7 34 76 325 79 50 875 8 14 27 200 8 67 01 540 93 86 329 9 60 87 869 18.00 17.57
14 Aluminium, Structural Glazing 35 29 52 359.37 27 66 97 598.44 62 96 49 957.81 34 09 66 749 21 83 95 487 55 93 62 236 40 34 84 974 27 04 14 245 67 38 99 219 20.48 7.03
and Façade Works
15 Roads 47 61 18 874.72 0.00 47 61 18 874.72 41 18 51 197 0 41 18 51 197 51 88 35 337 0 51 88 35 337 25.98 8.97
16 Horticulture 1 84 60 174.93 68 88 960.00 2 53 49 134.93 1 84 60 203 68 88 960 2 53 49 163 2 04 16 257 75 77 440 2 79 93 697 10.43 10.43
17 Signages 0.00 2 11 89 117.35 2 11 89 117.35 0 1 73 28 815 1 73 28 815 0 2 02 60 355 2 02 60 355 16.92 - 4.38
TOTAL 316 77 34 683.59 58 58 04 701.35 375 35 39 384.94 256 60 79 611 44 79 65 397 301 40 45 008 318 06 90 628 54 19 88 205 372 26 78 833 23.51 - 0.82
Page 2 of 85
ABSTRACT OF COST FOR CIVIL WORKS
Name of Work : Construction of Hospital & Academic Campus for All India Institute of Medical Sciences Campus (AIIMS) at Nagpur – Maharastra.
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
1 1A 2 3 4 5 6
1.0 2.0 EARTH WORK
1.1 Earth work in excavation by mechanical means
(Hydraulic excavator) / manual means over areas
(exceeding 30cm in depth. 1.5 m in width as well as 10
sqm on plan) including disposal of excavated earth, lead
upto 500m and lift upto 1.5m, as directed by Engineer in
charge.
1.1.1 2.6.1 All kinds of soil 152,921 Cum 126 85 1 29 98 285 102 1 55 97 942 1.20
1.2.1 2.7.1 Ordinary rock 48,844 Cum 221 300 1 46 53 200 360 1 75 83 840 1.20
1.2.2 2.7.3 Hard rock (blasting prohibited) 15,841 Cum 620 600 95 04 600 720 1 14 05 520 1.20
1.3.1 2.8.1 All kinds of soil 10,882 Cum 166 200 21 76 400 240 26 11 680 1.20
1.4.1 2.9.1 Ordinary rock 3,109 Cum 276 300 9 32 700 360 11 19 240 1.20
1.4.2 2.9.3 Hard rock (blasting prohibited) 1,554 Cum 657 650 10 10 100 780 12 12 120 1.20
1.6.1 2.26.1 All kinds of soil 84,345 Cum 52 10 8 43 450 12 10 12 140 1.20
1.7 2.27 Supplying and filling in plinth with sand (zone V) under
floors, including watering, ramming, consolidating and 400 Cum 918 1 477 5 90 800 1 861 7 44 400 1.26
dressing complete.
Sand Cum 1.00 1270.00 1270
bulkage % 10.00 127
Page 3 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Total 1477
Page 4 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Total 2826
2.3 4.10 Providing and laying damp-proof course 40mm thick with
cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-
III) : 4 graded stone aggregate 2,025 Sqm 263 223 4 51 575 281 5 69 025 1.26
20mm nominal size).
CC Cum 0.04 3428 137
8 Labour Sqm 1.00 86.08 86
Total 223
2.4 4.12 Extra for providing and mixing water proofing material in
cement concrete work in doses by weight of cement as per 50 kg
per manufacturer's specification. 607 48 35 21 245 44 26 708 1.26
cement
Bitu. KG 1.70 35 60
Labour Sqm 1.00 20 20
Total 80
2.7 4.15 Extra for laying concrete in or under water and/or liquid Cum per
mud including cost of pumping or bailing out water and 3,215 Meter 475 475 15 27 125 599 19 25 785 1.26
removing slush etc. complete. Depth
Page 5 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Page 6 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
3.4.1 5.33.1 All works upto plinth level 24,680 Cum 6446 Site Batch 4 088 10 08 91 840 5 151 12 71 26 680 1.26
Cement Bag 6.60 190 1254
Coarse Sand Cum 0.50 1746 873
Stone Agg. Cum 0.90 988 889
Admixture Kg. 3.30 90 297
Transit Mixer Cum 1.00 125 125
Pumping Cum 1.00 100 100
Labour Cum 1.00 550 550
Total 4088
3.4.2 5.33.2 All works above plinth level up to floor V level. 50,039 Cum 7250 4 138 20 70 61 382 5 214 26 09 03 346 1.26
Cement Bag 6.60 190 1254
Coarse Sand Cum 0.50 1746 873
Stone Agg. Cum 0.90 988 889
Admixture Kg. 3.30 90 297
Transit Mixer Cum 1.00 125 125
Pumping Cum 1.00 125 125
Labour Cum 1.00 575 575
Total 4138
Page 7 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
3.5.1 5.40.1 All works upto plinth level 3,842 Cum 6692 Revised RMC rates are given by Mumbai 4 636 1 78 11 512 5 517 2 11 96 314 1.19
RO
RMC on 23/11/2017
Cum 1.00 4275 4275
Wastage % 2.00 86
Pump Cum 1.00 75 75
Laying Cum 1.00 200 200
Total 4636
3.5.2 5.40.2 All works above plinth level up to floor V level. 572 Cum 7495 4 691 26 83 252 5 582 31 92 904 1.19
RMC Cum 1.00 4275 4275
Wastage % 2.00 86
Pump Cum 1.00 80 80
Laying Cum 1.00 250 250
Total 4691
Page 8 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
3.7 5.35 Add for using extra cement in the items of design mix
over and above the specified cement content therein. 14,944 quintal 673 Cement Qtl 2 190 380 380 56 78 720 570 85 18 080 1.50
3.8 5.38 Extra for R.M.C. work above floor V level for each four
6,773 Cum 232 100 6 77 300 119 8 05 987 1.19
floors or part thereof.
Page 9 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
3.10.1 5.44.1 Floor Joint of 100mm gap 207 Rmt 4741 No Approved make specified 4 820 9 97 740 5 688 11 77 416 1.18
assume 10% discount
Deevin
Rate Rmt 1.00 4820 4820
Extra for % 0
Feright and
others
Total 4820
3.11.1 5.45.1 Wall Joint of 100mm gap 378 Rmt 3928 4 200 15 87 600 4 956 18 73 368 1.18
Deevin Rmt 1.00 4200 4200
Page 10 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Extra for %
Feright and 0
others
Total 4200
3.12.1 5.46.1 Roof Joint of 100mm gap 207 Rmt 4393 4 859 10 05 813 5 734 11 86 938 1.18
Rate Rmt 1.00 4859 4859
Extra for %
Feright and 0
others
Total 4859
Page 11 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
4.2 6.47 Providing and laying Autoclaved Aerated Cement blocks No Approved make specified,
masonry with 150mm / 200mm / 230mm / 300mm thick Biltech from Pune @ 4150
AAC blocks in super structure above plinth level up to Magicrete from Surat@ 3600,
floor V level with RCC band at sill level and lintel level Duralite Local from Nagpur @ 2800
with approved block laying polymer modified adhesive Taking Duralite
26,329 Cum 5687 4 071 10 71 85 359 5 129 13 50 41 441 1.26
mortar all complete as per direction of Engineerin-
Charge.
(The payment of RCC band and reinforcement shall be
made for seperately)
For 1 Cum
AAC Blocks Cum 1 2800.00 2800
Wastage % 5 140
Adh Kg 32 10.00 320
19+4*5%=23/cft Labour Cum 1 811 811
Total 4071
Merino
Rate Sqm 1 6421 6421
Local Freight %
3 192.63
Installation sqm 1 0
Total 6613.63
Page 12 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
4.5 Brick work with non modular fly ash bricks conforming to
IS:12894, class designation 10 average compressive
strength:
4.5.1 6.34.2 in super structure above plinth level up to floor V level I
Cement mortar 1:6 (1 cement : 6 Coarse sand) 100 Cum 6167 3 268 3 26 800 4 118 4 11 800 1.26
Page 13 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Page 14 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
5.2.1 7.1.1 Cement mortar 1:6 (1 cement : 6 coarse sand) 1,000 Cum 3966 2 944 29 44 000 3 709 37 09 000 1.26
Rubble Stone Cum
1.05 952 1000
Hard Stone LS 50
1:06:12 LS
Cement Bag 1.65 190 314
Sand Cum 0.4 1746 698
25 Labour Cum 1 882 882
Total 2944
6.1.2.2 8.2.2.2 Area of slab over 0.50 sqm 2,281 Sqm 3113 3 757 85 68 887 4 733 1 07 95 973 1.26
Stone Sqft. 1.00 225.00 225
Wastage % 15.00 34
Mortar sft 1.00 10.00 10
WC+pig Sqft. 1.00 2.00 2
Edge Rft
0.67 40.00 27
Moulding
Epoxy Sft 1.00 1.00 1
Labour Sqft. 1.00 50.00 50
Total 349
For 1 sqm 3756.64
Page 15 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
6.2 Based on Providing and fixing Base work for kitchen / pantry
DSR platform and vanity counter base in approved 25mm
thick semi polished kota stone anchored in wall/floor
upto 50mm and finished with neat cement slurry, vertical
supports in same kota stone where ever required,
properly fixed at floor and walls inclusive of necessary
cutting and finishing of floor and wall as directed by 3,104 Sqm 765 644 19 98 976 811 25 17 344 1.26
engineer incharge.
(Area of Counter and partition supports to be measured
for payment).
6.4 8.4 Extra for fixing marble / granite stone, over and above
corresponding basic item, in facia and drops of width
upto 150mm with epoxy resin based adhesive, including 2,718 Meter 266 150 4 07 700 189 5 13 702 1.26
cleaning etc. complete.
6.5 8.5 Extra for providing opening of required size & shape for
wash basin / kitchen sink in kitchen platform, vanity
counter and similar location in marble/ Granite/ stone
work, including necessary holes for pillar taps etc. 1,381 Each 428 500 6 90 500 630 8 70 030 1.26
including moulding, rubbing and polishing of cut edges
etc. complete.
6.6.1 Based on 18mm thick Granite slab of Jet Black, Cherry Red, Elite
2,953 Sqm 4696 2 669 78 82 951 3 364 99 33 892 1.26
8.11.1 Brown, Cat Eye or equivalent.
12 MM 1:3
Masala
Cement Bag 10.2 190 1938
C. sand Cum 1.07 1746 1868
Page 16 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
6.7.1 Based on Granite stone slab to be jet Black, Cherry Red, Elite
40,149 Sqm 2938 2 519 10 11 26 338 3 174 12 74 32 926 1.26
8.13.1 Brown, Cat Eye or equivalent.
Stone Sqft. 1.00 152.00 152
Wastage % 15.00 23
Mortar sft 1.00 7.00 7
WC+pig Sqft. 1.00 2.00 2
45+4*2.5% Labour Sqft. 1.00 50.00 50
Total 234
For 1 sqm 2518.78
7.1.1 9.1.1 Second class teak wood 13 Cum 92743 97 805 12 71 465 1 23 234 16 02 042 1.26
For 1 sqm 0.0488 Cum
Wood i/c Cum 0.0568 70560 4008
Wastage
Making Rmt 5.1 100 510
Fxg Each 1 250 250
Total 4768
For 1 Cum 97805
Page 17 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
7.2.1 NSR Size 10mm dia x 140mm Long 18,760 Each 65 90 16 88 400 108 20 26 080 1.20
7.3.1 Based on 30mm thick with SS Ball Bearing Hinges of size 100 x 75
9.21 x 3mm satin finished of approved make with necessary 6,556 Sqm 2433 1 470 96 38 120 1 852 1 21 41 712 1.26
SS screws for wooden doors
Flush door Sqm 1.64 1150 1886
SS Hinges No. 4.00 80 320
Labour Sqm 1.64 125 205
Total 2411
For 1Sqm 1470
7.4.1 9.127.2 1.0mm thick 13,111 Sqm 518 458 60 04 838 577 75 65 047 1.26
Laminate sqm 1.00 262.00 262
wastage % 15.00 39
%20%
adhesive sqm 1.00 50.00 50
labour sqm 1.00 107.00 107
Total 458
7.4.2 9.127.1 1.5mm thick 2,030 Sqm 837 578 11 73 340 728 14 77 840 1.26
Laminate sqm 1.00 366.00 366
wastage % 15.00 55
%20%
adhesive sqm 1.00 50.00 50
labour sqm 1.00 107.00 107
Total 578
7.6 Based on Extra for providing lipping with 2nd class teak wood
9.23 battens 6mm minimum depth on all edges of flush door
shutters (over all area of door shutter to be measured). 6,556 Sqm 88 70 4 58 920 88 5 76 928 1.26
Page 18 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
7.7 Extra for providing vision panel not exceeding 0.1 sqm in
all type of flush doors (cost of glass excluded) (overall
area of door shutter to be measured):
7.7.1 9.24.1 Rectangular or square. 1,993 Sqm 163 116 2 31 188 146 2 90 978 1.26
Cutting LS 1 150 150
Beeding and Rft
4 10 40
fxg
Total 190
For 1 Sqm 116
7.8.1 9.7.7.2 With float glass panes of 5.50 mm thickness 359 Sqm 1457 940 3 37 460 1 109 3 98 131 1.18
7.9 9.26 Extra for cutting rebate in flush door shutters (Total area
1,993 Sqm 128 150 2 98 950 177 3 52 761 1.18
of the shutter to be measured).
Godrej
Tower Bolt Each 1 400 400
Fixing Each 1 50 50
Total 450
Godrej
Tower Bolt Each 1 300 300
Fixing Each 1 50 50
Total 350
7.12.1 NSR "H" type Stainless Steel (304 grade) stain finished pull
handle of approved make, back to back fixing
accessories, wood and metal doors. The pull handles
should have supporting washer with raised bevelling on 573 Pair 3798 2 700 15 47 100 3 240 18 56 520 1.20
the outer surface, SS 304 grade. Size 25 x 450mm
Godrej
H Handle Pair 1 2500 2500
Fixing Pair 1 200 200
Total 2700
Page 19 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
7.12.3 NSR "H" type Stainless Steel (304 grade) stain finished pull
handle of approved make, back to back fixing
accessories, wood and metal doors. The pull handles
should have supporting washer with raised bevelling on 356 Pair 4392 3 700 13 17 200 4 440 15 80 640 1.20
the outer surface, SS 304 grade. Size 25 x 600mm
Godrej
H Handle Pair 1 3500 3500
Fixing Pair 1 200 200
Total 3700
7.13.12 NSR Wall door stop 82mm projection 970 Each 395 330 3 20 100 396 3 84 120 1.20
Godrej
Door Stoper Each 1 280 280
Fixing Each 1 50 50
Total 330
Page 20 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Godrej
Lever Handle Pair 1 1800
1800
Fixing Pair 1 300 300
Total 2100
Godrej
Page 21 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Godrej
Dead Lock Each 1 1500 1500
Fixing Each 1 250 250
Total 1750
7.17 NSR Providing and fixing Mortice shaft dead bolt / Lock with
alen key of approved make, with BS 57mm and 25mm
Sq forend with escutcheons in SS 304 grade. 244 Each 626 1 300 3 17 200 1 560 3 80 640 1.20
Godrej
Dead Bolt Each 1 1200 1200
Fixing Each 1 100 100
Total 1300
7.18 NSR Supply & fixing of fully insulated wooden fire door of
approved make of 120min. fire rating, of minimum 50mm
thickness, comprising of 75mm x 44mm hardwood
internal timber frame work, with infill insulation of 20mm
thick of of 96 kg/m3, wool insulation, coated with
intumuscent coating on both sides for insulation. The
coated insulation shall be sandwiched between min
12mm thick Non Combustible (Calcium Silicate) Boards
on both sides (edge to edge on internal Hardwood
frame) and cladded with 3mm thick Commercial ply &
1mm thick Laminate (approved shade and colour) on
both sides, with 50mm x 14mm exposed teak wood
lipping all round the shutter. The shutter shall be fitted
with fire & smoke intumescent seal of size 20 x 4mm on
all the three sides except bottom. The pasting of the ply /
laminate should be done using automatic machine and
should be free from any nails or perforations.
Page 22 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
7.19 NSR Providing and fixing wooden fire rated door frames as
per BS: 476 part 22, IS:3614 Part II as per the prototype
certified by CBRI Roorkee or equivalent lab, frame to be
made out of 2nd class Teak Wood (Ivory Coast) frame of
section 120mm x 70mm for fire resistant doors of 120
minutes fire rating, with heat activated intumescent fire
seal strips of size 02 nos. x 10 x 4mm (for smoke
sealing) provided in grooves on all three sides of the
frame with one coat of approved brand of fire retardant
primer including two coats of fire retardant paint FRS
881 un thinned on cleared hard wood surface of door 3,286 Rmt 2451 1 415 46 49 690 1 670 54 87 620 1.18
frames (@3.5 sq.m. per litre per coat) including
preperation of base surface as per recommendations of
manufacturer to make the surface fire retardant,
including fixing the frame with 8 nos. 100mm long, 10mm
dia metal dash fastners complete as per directions of the
Engineer in charge.
7.22.1 NSR Single Leaf Panic Bar 258 Each 7418 5 661 14 60 538 6 680 17 23 440 1.18
7.22.2 NSR Single Leaf Panic Trim 258 Each 6226 4 967 12 81 486 5 861 15 12 138 1.18
7.22.3 NSR Double Leaf Panic Bar 50 Each 18148 12 954 6 47 700 15 286 7 64 300 1.18
Page 23 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Page 24 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
7.26 NSR Providing & fixing of Wooden lead lined door from Single
/ Double leaf to required sizes of approved make,
consists of frame, shutter and finish as detailed below.
Door frame shall be Single rebate profile of size 120 x 70
mm made out of teak Wood (Ivory Coast). Frames shall
be Butt jointed and field assembled with self tabs. The
Shutter & Frame Shall be fully lead lined of min of 2mm
lead Sheet with 99% purity and as defined by AERB. All
provision should be mortised, drilled and tapped for
receiving appropriate hardware. Rubber door silencers
should be provided on the striking jamb. Frames should
be fixed by anchor fasteners for installation on a finished
plastered masonry wall opening. Door leaf shall be 44
mm thick with commercial ply & 1mm laminate both side.
incase vision lite is required it shall be only Lead Glass
as recomomnded by AERB/DRC. The internal
construction of the door should be rigid with lead line of 10 Sqm 24838 13 750 1 37 500 16 225 1 62 250 1.18
2mm thick all across the inside of the exposed surface.
In addition the door should have a basic infill ROCK
WOOL with necessary reinforcement both on top and
bottom. All doors should be factory prepped for receiving
appropriate hardware and provided with necessary
reinforcement for hinges, locks, and door closers as per
ANSI Standard .The door Leaf & Frame shall be in a
position so that Lead Line should overlap.
7.27 9.161 Providing and fixing fire resistant door frame of section
50 x 60mm on horizontal side & 35 x 60 mm on vertical
sides having built in rebate made out of 1.6 mm thick GI
sheet ( Zinc coating not less than 120gm/m²) suitable for
mounting 120 min Fire Rated Glazed Door Shutters. The
frame shall be filled with Mineral wool Insulation having
density min 96Kg/m³ . The frame will have a provision of
G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4
on horizontal style of size M10 x 80 ) suitable for fixing in
the
opening along with Factory made Template for SS Ball 649 Rmt 1260 997 6 47 053 1 176 7 63 224 1.18
Bearing Hinges of Size 100x89x3mm for fixing of fire
rated glazed shutter.
The frame shall be finished with a approved fire resistant
primer or Powder coating of not less than 30 micron in
desired shade as per the directions of Engineer - in-
charge.
(Cost of SS ball bearing hinges is excluded).
Page 25 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
7.28 9.162 Providing and fixing 60mm thick glazed fire resistant
door shutters of 120 min Fire Rating confirming to
IS:3614 (Part II) or EN1634- 1:1999, tested and certified
as per laboratory approved by Engineer-in-charge, with
suitable mounting on door frame, consisting of vertical
styles, top rail & side rail 60 mm x 60 mm wide and
bottom rail of 110 mm x 60 mm made out of 1.6mm thick
G.I. sheet (zinc coating not less than 120gm/m²) duly
filled mineral wool insulation having density min 96 kg/m³
and fixing with necessary stainless steel ball bearing 392 Sqm 6839 4 785 18 75 720 5 646 22 13 232 1.18
hinges of size 100x89x3mm of approved make, including
applying a coat of approved fire resistant primer or
powder coating not less than 30micron etc all complete
as per direction of Engineer-in-charge (panelling to be
paid for seperately).
7.29 9.163 Providing and fixing non load bearing fixed frame for fire
resistant glazed Partition for 120 min Fire Rating, made
out to a profile of dimension 60mm x 70 mm of 1.6 mm
thick galvanised steel sheet as per test evidence suitable
for fixing fire rated glass for 120 min of both integrity &
radiation control (EW120) & minimum 15min of insulation
(EI15).The profile has to be fixed to the supporting
construction by means of anchor fasteners of size M10 x
80, every 150 mm from the edges and every 500 mm
(approx) c/c. Linear meaurement of frame shall be 243 Rmt 1260 997 2 42 271 1 176 2 85 768 1.18
measured for payment. The frame shall be filled with
mineral wool insulation of density min 96kg/m³. and
finished with a approved fire resistant primer or Powder
coating of not less than 30 micron in desired shade as
per the directions of Engineer - in- charge
Page 26 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
7.30 9.164 Providing and fixing glazing in fire resistant door shutters
and vision panels in door shutters, fixed panels &
partitions etc., with G.I. beading made out of 1.6 mm
thick G.I. sheet (zinc coating not less than 120 gm/m²) of
size 20 x 33 mm screwed with M4 x 38 mm SS screws at
distance 75 mm from the edges and 150 mm c/c ,
including applying a coat of approved fire resistant
primer/powder coating of not less than 30micron on G.I.
beading, & special ceramic tape of 5 x 20 mm size etc
complete in all respect as per direction of Engineer-in-
charge. The glass shall be clear, toughened,
interlayered, non-wired fire resistant having 11mm
thickness of approved brand with 120 minutes of fire
resistance both integrity & radiation control (EW120) and
minimum 15 min of insulation (EI15) and having a sound
reduction of 37dB and LT of 86%. Glass shall be
compliant to class 2(B)2 category of Impact Resistance
625 Sqm 34059 21 260 1 32 87 500 25 087 1 56 79 375 1.18
as per EN 12600. The glass should be manufactured in
UL & TUV audited Facility and including UL-EU
Certification.The maximum glazing size cannot be more
than 1100 mm x 2200 mm (w x h) or 2.42 sq mts in total
area. The test report for the complete system (Glazed
Door or Partition) will be considered valid only if it
contains the stamp and signature of the authorized
signatory from the glass manufacturer. (Actual glass size
is to be measured at site for payments).
Page 27 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
7.33 NSR Providing and fixing 50mm thick glazed fire resistant
DOOR SHUTTER of 120 minutes fire rating conforming
to IS: 3614 ( Part - II ) for stability and integrity , tested
and certified as per laboratory CBRI Roorkee/ Warrigton
fire research lab approved by Engineer - in - charge, with
suitable, mouting on door frame, consisting of vertical
styles, top rail 100mm wide, bottom rail 200 mm wide,
made out of 16 gauge stainless steel 304 grade ( hair
line brushed finish) duly filled with FR insulation material
and fixing with necessary stainless steel ball bearing
hinges of approved make, all complete as per direction 43 Sqm 11392 13 100 5 63 300 15 458 6 64 694 1.18
of Engineer - In - Charge ( The complete assembly of
the door shall be tested from CBRI Roorkee with glass
and hardwares for both single leaf / double leaf doors
prior to the completer supply as per CPWD requirements
7.34 NSR Providing and fixing glazing in fire resistant door shutter,
fixed panels ventilators and partition etc with stainless
steel 304 grade sheet beading of appropriate size, made
out of 16 guage stainless steel 304 grade sheet
including fire resistant sealent, complete in all respect as
per direction of Engineer in charge.
With clear fire resistant single layer clear glass panels
minimum 6mm thickness for full glazing of approved
brand having minimum 120 miniutes fire resistance of
various sizes and at required locations in the fire doors.
The glasses shall be clear borosilicate fully transparent
in fire / non fire condition (92% transparancy) non -
opaque, toughened glass of 120 minutes fire rating and
fixing in position with SS beading and sealents at joints
etc. complete. The glass shall be tested from CBRI 43 Sqm 36638 13 100 5 63 300 15 458 6 64 694 1.18
Roorkee / Warrington's Fire research lab with CE
certification for glass as per BS-EN 1364 - 1: 1999/BS
476 part 2 / EN 13501-2: 2003 along with the complete
assembly of the fire door with complete hardware. The
manufacture shall submit the valid test reports fo both
single / double leaf doors prior to the manufacturing to
the Engineer in Charge.
Page 28 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
7.37.1 NSR 12mm thick clear toughened Glass 193 Sqm 2736 2 430 4 68 990 2 867 5 53 331 1.18
Page 29 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Net 961
Wastage % 5 48
Fxg/with sqm 1 125
125
screws
Total 1134
7.38.3 NSR 18mm thick Ply 500 Sqm 1892 1 610 8 05 000 2 029 10 14 500 1.26
Merino sqm 1 2020 2020
Discount % 30 -606
Net 1414
Wastage % 5 71
Fxg/with sqm 1 125
125
screws
Total 1610
7.39 NSR Providing and fixing of 6mm thick lacquered glass of
approved shade, colour and make on the ply wood for
wall lining, partitions, boxing of required sizes as per
architectural drawings. Glass to be stuck on ply with
approved 2mm thick transparent UHP Acrylic Foam
Tapes (Pentagon BOW - 720T or 3M VHB – 4918 or 220 Sqm 2685 5 400 11 88 000 6 372 14 01 840 1.18
equivalent) as per tape manufactures specifications. All
edges of lacquered glass to be machine polished etc
complete and as directed by Engineer in charge.
7.40 NSR Providing and fixing of 6mm thick extra clear mirror of
approved make on the ply wood for wall lining, partitions,
boxing of required sizes as per architectural drawings.
Mirror to be stuck on ply with approved 1.5mm thick
transparent UHP Acrylic Foam Tapes (Pentagon BOW -
715T or 3M VHB – 4915 or equivalent) as per tape 115 Sqm 2836 5 040 5 79 600 5 947 6 83 905 1.18
manufactures specifications. All edges of lacquered
glass to be machine polished etc complete and as
directed by Engineer in charge.
Page 30 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
7.42 NSR Supply & fixing of Fire-stop Fire sealing System Board
Type (barriers) of approved make for sealing of floors,
wall openings under control panels for the purpose of
compartmentation.The FPSS consists of 100mm thick
mineral wool insulation pad of approved make having
density of 48 kg/m3 coated with FR in tumescent
compound encased with 10 mm thick calcium silicate
board of approved make, sealed with intumescent Fire
Seal Putty of approved Make. The system is coated and
fixed with openings with the help of slotted angles of size 431 Sqm 14572 5 000 21 55 000 5 900 25 42 900 1.18
40x40mm of 16 SWG thickness, nutbolts of size
1.5"x8mm Dia. The FPSS system all provide 2 hours fire
rating as per IS 12458-1989.After insulation of this
system it will be painted with Fire Retardant Paint of
approved Make.
8.1.1 10.16.2 Hot finished seamless type tubes 132,000 Kg 94 78 1 02 43 200 92 1 21 44 000 1.19
Str. Steel MT 1.00 52000.00 52000
Wastage % 5.00 2600
Fabrication/ MT
1.00 22000.00 22000
Errection
Additional MT
Cost for fixing 1.00 0
Primer 1000
Paint
Page 31 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Total for 1
77600.00
MT
For 1 KG 77.60
Primer 1000
Paint
Total for 1
61050.00
MT
For 1 KG 61.05
8.2.2 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets,
2,000 Kg 86 65 1 30 100 77 1 54 000 1.19
gates and similar works
Str. Steel MT 1.00 41000.00 41000
Wastage % 5.00 2050
Fabrication/ MT
1.00 18000.00 18000
Errection
Additional MT
Cost for fixing 1.00 3000.00 3000
Primer 1000
Paint
Total for 1
65050.00
MT
For 1 KG 65.05
8.3 10.28 Providing and fixing stainless steel (Grade 304) railings
made of Hollow tubes, channels, plates etc., including
welding, grinding, buffing, polishing and making
curvature (wherever required) and fitting the same with
necessary stainless steel nuts and bolts complete, i/c
fixing the railing with necessary accessories & stainless
steel dash fasteners, stainless steel bolts etc., of
required size, on the top of the floor or the side of waist 20,706 Kg 472 380 78 68 280 448 92 76 288 1.18
slab with suitable arrangement as per approval of
Engineer-in-charge, (for payment purpose only weight of
stainless steel members shall be considered excluding
fixing accessories such as nuts, bolts, fasteners etc).
Page 32 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
8.5.1 10.6.1 80x1.25 mm M.S. laths with 1.25 mm thick top cover
30 Sqm 2316 3 000 90 000 3 540 1 06 200 1.18
8.6 10.7 Providing and fixing ball bearing for rolling shutters.
10 Nos 379 600 6 000 708 7 080 1.18
8.8 10.8 Extra for providing mechanical device chain and crank
30 Sqm 724 1 000 30 000 1 180 35 400 1.18
operation for operating rolling shutters.
9.1.1 11.26.1 25mm thick 6,025 Sqm 1158 946 56 99 650 1 192 71 81 800 1.26
Kota Sqft. 1.00 33 33
Wastage % 30.00 9.9
CM-25 mm Sqft. 1.00 7 7
WC+pig Sqft. 1.00 2 2
22+4*2.5% Labour Sqft. 1.00 24.2 24
Polish Sqft. 1.00 12 12
Total 87.9
For 1 Sqm 946
Page 33 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
9.3 11.31 Extra for pre finished nosing in treads of steps of Kota
351 Meter 85 50 17 550 63 22 113 1.26
stone/ sand stone slab.
9.4 11.32 Extra for Kota stone/ sand stone in treads of steps and
risers using single length up to 1.05 metre. 145 Sqm 19 33 4 785 42 6 090 1.26
9.5 11.36 Providing and fixing 1st quality Ceramic wall Tiles
conforming to IS: 15622 (thickness to be specified by the
manufacturer) of approved make in all colours and
shades of any size as approved by Engineer-in-Charge
in skirting and dados over 12mm thick bed of cement
Mortar 1:3 (1 cement :3 coarse sand) and jointing with 29,249 Sqm 745 743 2 17 23 700 936 2 73 77 064 1.26
grey cement slurry @ 3.3kg per sqm including pointing in
white cement mixed with pigment of matching shade
complete.
9.6 11.40 Providing and laying rectified Glazed Ceramic floor tiles
of size 300 x 300mm or more (thickness to be specified
by the manufacturer), of 1st quality conforming to IS :
15622, of approved make, in all colours, shades as
approved, laid on 20mm thick Cement Mortar 1:4 (1
4,122 Sqm 901 710 29 28 368 895 36 89 190 1.26
Cement : 4 Coarse sand), jointing with grey cement
slurry @ 3.3kg/sqm including pointing the joints with
white cement and matching pigments etc., complete.
9.7.1 11.41.2 600mm x 600mm 39,966 Sqm 1119 678 2 71 02 224 854 3 41 30 964 1.26
Tile sft 1.00 31.00 31
Page 34 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Wastage % 10.00 3
CM Sft 1.00 7.00 7
WCP sft 1.00 2 2
slurry kg 0.33 3.80
18+10% Labour sft 1.00 20.00 20
Total 63
For 1Sqm 678.13
9.7.2 11.41.4 1000mm x 1000mm 17,129 Sqm 2058 1 496 2 56 28 341 1 885 3 22 88 165 1.26
Tile sft 1.00 100.00 100
Wastage % 10.00 10
CM Sft 1.00 7.00 7
WCP sft 1.00 2 2
slurry kg 0.33 2.00
Labour sft 1.00 20.00 20
Total 139
For 1Sqm 1496.20
9.8.1 11.46.2 600mm x 600mm 11,181 Sqm 1135 689 77 02 546 868 97 05 108 1.26
Tile sft 1.00 31.00 31
Wastage % 10.00 3
CM Sft 1.00 5.00 5
WCP sft 1.00 2 2
slurry kg 0.33 2.00 1
20+10% Labour sft 1.00 22.00 22
Total 64
For 1Sqm 688.90
9.8.2 11.46.4 1000mm x 1000mm 1,243 Sqm 2076 1 507 18 73 151 1 899 23 60 457 1.26
Tile sft 1.00 100.00 100
Wastage % 10.00 10
CM Sft 1.00 5.00 5
WCP sft 1.00 2 2
slurry kg 0.33 2.00 1
Labour sft 1.00 22.00 22
Total 140
For 1Sqm 1506.96
Page 35 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
9.9 NSR Providing & fixing 2mm thick homogeneous PVC Vinyl
flooring of approved make with a single layer of PVC,
total weight is 3250 g/m2, good resistance of scratch,
slip, chemical and fire, doesn’t favor in growth of fungi &
bacteria. Low VOC emissions after 28days of
installation. Phthalate Free. Directional in Design. The
floor finish should terminate at the room perimeter 2,024 Sqm 1781 CCIL 1 224 24 77 376 1 444 29 22 656 1.18
passing over a concealed cove forming and continuing
up on the wall upto 100mm. Covered area of floor and
skirting to be measured for payment.
9.10 NSR Extra for providing and fixing coving of suitable material
for PVC flooring including the cost of labour and
materials for coving. Length of coving shall be measured 4,750 Rmt 165 75 3 56 250 89 4 22 750 1.18
for payment.
9.11 NSR Providing and fixing PVC Vinyl Accoustic flooring over
fiberglass mat PVC foam backing (EN 14904). Total
thickness is 3.35mm (EN 428/EN 427). Wear layer
thickness is 0.65mm (EN 429). Anti-bacteria and Anti-
fungus surface treatment (Sanitized). TOP CLEAN XP
reinforced. Total weight is 3240g/m2 (EN 430),
Dimentional Stablity <0.10%(EN-434),Reaction to fire
(EN 13501-1) Bfl s 1 on fibrecement substrate), Static
indentation ( EN 433: 0.12mm ), Castor chair test
qualified –No damage(EN-425), furniture leg test
qualified (EN 424)-No damage, underfoot comfort (EN
433) ≥ 0.40mm,Impact Sound reduction(EN ISO 140-
8,EN ISO 717-2 )Δlw 19Db, Acoustical Improvement (NF 550 Sqm 3206 1 560 8 58 000 1 841 10 12 550 1.18
S31-074)-Class A,Certficat NF UPEC.A+(NF 189)-
Registered, no formaldehyde emission (EN 717-1), no
Pentachlorophenol (EN 12673), Low VOC emissions
after 28days of installation (lower than ≤100μg/m3),
Chemical resistance test qualified (EN 423)-High
resistance, Thermal and underfloor heating test
qualified(EN12524)-Suitable & slip resistant.
CCIL
Flooring SQM 1 1345 1345
Freight % 3 40
Installation SQM 1 175 175
Total 1560
Page 36 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
CCIL
Flooring SQM 1 1345 1345
Freight % 3 40
Installation SQM 1 175 175
Total 1560
Page 37 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
9.13.1 11.54.2 450mm Finished Floor Height (FFH). 200 Sqm 4275 Access Floors 3 315 6 63 000 3 912 7 82 400 1.18
Vendor Rate Sqm 1 3250 3250
Freight % 2 65
Total 3315
9.14 11.53 Providing and fixing Glass mosaic tiles on finished plain
wall surface of size 20 mm x 20 mm x 4 mm in all colour,
design , fixing in approved design. The glass mosaic
tiles shall be fixed on the wall surface with the help of
approved adhesive applied at the rate of 2.5 kg per sqm 1,162 Sqm 1604 2 099 24 39 038 2 645 30 73 490 1.26
and grouting of the same. All completed as per direction
of Engineer-incharge.
Page 38 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Wastage % 5 8
Adh, Grout , Sft 1 37
37
Labour
Total 195
For 1 Sqm 2099
9.15.1 11.3.1 40mm thick with 20mm nominal size stone aggregate
6,934 Sqm 363 279 19 34 586 352 24 40 768 1.26
CC Cum 0.04 3428 137
Neat
Cement@3.3 Kg 3.30 3.8 13
kg/sqm
12 Labour Sqm 1.00 129.12 129
Total 279
Page 39 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
9.18.1 11.52.1 18mm thick Italian Marble stone slab, Perlato, Rosso
verona, Fire Red or 100 Sqm 5234 6 103 6 10 319 7 690 7 69 000 1.26
Dark Emperadore etc.
Stone Sqft. 1.00 375.00 375
Wastage % 25.00 94
Mortar sft 1.00 7.00 7
WC+pig Sqft. 1.00 2.00 2
WC Slurry kg 0.44 13.76 6
55+10% Labour Sqft. 1.00 61.00 61
Polish Sft 1.00 22.00 22
Total 567
For 1 sqm 6103.19
9.19.1 8.11.1 18mm thick Italian Marble stone slab, Perlato, Rosso
verona, Fire Red or 100 Sqm 6647 6 028 6 02 784 7 595 7 59 500 1.26
Dark Emperadore etc.
Stone Sqft. 1.00 375.00 375
Wastage % 25.00 94
Mortar sft 1.00 7.00 7
WC+pig Sqft. 1.00 2.00 2
WC Slurry KG 0.33 13.76 5
50+10% Labour Sqft. 1.00 55.00 55
Polish sft 1.00 22.00 22
Total 560
For 1 sqm 6027.84
Page 40 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
9.20 11.34 38mm thick wood block flooring of first class teak wood
laid over 25mm thick leveling layer of cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 10 mm nominal size) to be paid separately,
coated with a thin layer of hot bitumen penetration 80/25
(blown type) @ 2.45 kg per sqm, including fixing blocks 350 Sqm 7267 5 244 18 35 400 6 607 23 12 450 1.26
in position after dipping in hot bitumen (blown type) up to
half depth, planed, levelled smooth and finished
complete.
For 1 Sqm
Wood Cum 0.044 88200 3881
Bitumen Kg 2.69 42 113
Making Sqm 1 750 750
Fxg Sqm 1 500 500
Total 5244
Page 41 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Page 42 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Page 43 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
10.6 NSR Providing and fixing of Wooden fire cum accoustic doors
as per BS:476 Part- 20 & 22 & IS 3614 part-1 & part-2
for stability, integrity and thermal insulation. 03 Criteria
Wooden door confirming to IS 277 with the following
specification. Recommended fire door shall have doors
tested at CBRI, Roorkee /DIC Haryana for maximum
rating of 2hrs tested with or without vision panel.
Individual Test certificates should be available for glass
used in vision lites confirming the required fire ratings.
Any deviation in specification other than what is
mentioned in the test certificates are not allowed. Proper
label confirming the type of door and the hourly rating is
mandatory.
Door leaf shall be 77mm thick fully flush door with or
without vision lite.
77mm thick shutter, comprising of 100mm x 65mm
hardwood internal timber frame work, with infill of 41mm
thick fire resistant & accoustic wool insulation of 48
Kg/m3 density coated with VIPER FR coating or
equivalent make on both sides for insulation. The coated
insulation shall be sandwiched between 12mm thick
HILUX / PAMTECH Non board or equivalent make
Page 44 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Page 45 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Page 46 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
11.2.1 12.59.1 8mm thick Calcium Silicate Board made with Calcareous
& Siliceous materials reinforced with cellulose fiber
manufactured through autoclaving process 5,365 Sqm 917 1 000 53 65 000 1 180 63 30 700 1.18
Page 47 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
11.3 Providing and fixing mineral fibre false ceiling tiles at all
heights of size 595X595mm of approved texture, design
and pattern. The tiles should have Humidity Resistance
(RH) of 99%, Light Reflectance > 85%, Thermal
Conductivity k = 0.052 - 0.057 w/m K, Fire Performance
as per (BS 476 pt 6 &7)in true horizontal level
suspended on interlocking T-Grid of hot dipped all round
galvanized iron section of 0.33 mm thick (galvanized
@120 gsm ) comprising of main T runners of 15x32 mm
of length 3000 mm, cross T of size 15x32mm of length
1200 mm and secondary intermediate cross T of size
15x32 mm of length 600 mm to form grid module of size
600x600 mm suspended from ceiling using galvanized
mild steel item (galvanised @80gsm) 50 mm long 8mm
outer diameter M-6 dash fasteners, 6 mm diameter fully
threaded hanger rod upto 1000mm length and L-shape
level adjuster of size 85x25x2 mm, spaced at 1200 mm
centre to centre along main ‘T’. The system should rest
on periphery walls /partitions with the help of GI
perimeter wall angle of size24x24X3000 mm made of
0.40 mm thick sheet, to be fixed to the wall with help of
plastic rawl plug at 450 mm centre to centre & 40 mm
long dry wall S.S. screws. The exposed bottom portion
of all T-sections used in false ceiling support system
shall be prepainted with polyester baked paint, for all
heights. The work shall be carried out as per
specifications, drawings and as per directions of the
engineer-in- charge.
Page 48 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Page 49 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
12.5 13.22 Extra for plastering exterior walls of height more than 10
m from ground level for every additional height of 3 m or 93,777 Sqm 41 40 37 51 080 50 46 88 850 1.26
part thereof.
12.6 13.21 Extra for providing and mixing water proofing material in per bag of
cement plaster work in proportion recommended by the 9,961 50kg cement
used 50 35 3 48 635 44 4 38 284 1.26
manufacturers in the mix
Page 50 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
For 12 mm
Saint Gobain Sft 1 11.25
11.25
for additional sft 1 2.81
thickness of 3
mm
12.12.1 13.83.2 Two coats 258,531 Sqm 71 90 2 32 67 790 108 2 79 21 348 1.20
12.13.1 13.84.2 Two coats 5,200 Sqm 75 100 5 20 000 120 6 24 000 1.20
12.15.1 13.81.2 Two coats 3,038 Sqm 50 90 2 73 420 108 3 28 104 1.20
12.16 Based on Providing and fixing 150 mm wide, 22 gauge and 18mm
DSR square chicken wiremesh at junctions of concrete and
brick work and other locations at all heights placed
symmetrically on the joint, including cutting to required
size, fixing in position with cement and nails etc 6,496 Sqm 90 75 4 87 200 90 5 84 640 1.20
complete in all respects as per specifications / drawings
and to the entire satisfaction of the Engineer in Charge.
Page 51 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
12.17.1 13.43.1 Water thinnable cement primer 275,181 Sqm 37 40 1 10 07 240 48 1 32 08 688 1.20
Page 52 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
13.3 12.63 Providing and applying two coats of High Albedo paint
having minimum Solar Reflective Index (SRI) 108 (with
solar reflectance & thermal emittance tested as per
ASTM) C 1549 and ASTM C 1371 respectively), VOC
less than 10 cc/gm. The coating thickness and the
methodology of application shall be strictly as per
manufacturer's specifications and as approved by
Engineer-In-Charge. Surface preparation includes 33,315 Sqm 255 475 1 58 24 625 561 1 86 89 715 1.18
cleaning with metal wire brush to remove all dust, fungus
etc., washing with water all complete. The contractor
shall give guarantee for the perfomance of SRI and also
the durabitity of coating, all complete as per direction of
Engineer-in-Charge.
Page 53 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Page 54 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
13.6 22.26 Providing and applying of swellable type water stop tape,
19mm x 25mm thick in linear meter (expansive nature)
for construction joints treatment of RCC structure, such
as raft slab, retaining walls, water storage tank and at
the junctions of raft slab with the retaining walls etc. After
cleaning the surface, one coat of required primer for
swellable water stop tape shall be applied throughout the
length of the joint @3.78 litre per 240 running meter.
Over the primed surface swellable type water stop tape
709 Meter 539 765 5 42 385 903 6 40 227 1.18
shall be placed. The work shall be carried out all
complete as per specification and the direction of the
engineer-in-charge. The product performance shall carry
guaranteed for 10 years against any leakage.
14.1.1 NSR Sand Stone - 30mm thick (As per BS 8298) Finish
Honned - Basic Rate Rs. 1200 per sqm(Basic Rate is F
O R at site including finishing but excluding GST) 51,579 Sqm 3013 2 702 13 93 66 458 3 405 17 56 26 495 1.26
14.1.2 NSR Granite Stone - 30mm thick (As per BS 8298) Finish -
Honned. Basic Rate Rs. 3000 per Sqm (Basic Rate is F
O R at site including the cost of polishing, honning etc 2,250 Sqm 5623 4 585 1 03 16 250 5 777 1 29 98 250 1.26
but excluding GST)
Gratine (Basic Sft
1 279 279
Rate)
Wastage % 15 42
Scaffol Sft 1 5 5
Sealent Rft 2 25 50
Labour Sft 1 50 50
Total 426
For 1 Sqm 4585
14.2 7.39 Extra for stone work for wall lining on extrior walls of
height more than 10m from ground level for every 93,777 Sqm 86 40 37 51 080 50 46 88 850 1.26
additional height of 3m or part there of.
Page 55 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
14.3 7.41 Providing and fixing structural steel frame (for dry
cladding) on walls at all heights using M.S. square /
rectangular tube in the required pattern as per
architectural drawing, including cost of cutting, bending,
welding etc. The frame work shall be fixed to the wall
with the help of M.S. brackets / lugs of angle iron / flats
etc. which shall be welded to the frame and embedded
in brick wall with cement concrete block 1:2:4 (1
cement:2 coarse sand:4 graded stone aggregate 20 mm
nominal size) of size 300x230x300 mm, including cost of
necessary centring and shuttering and with approved
expansion hold fasteners on CC/RCC surface, including
drilling necessary holes. Approved cramps / pins etc.
shall be welded to the frame work to support stone
cladding, the steel work will be given a priming coat of
Zinc primer as approved by Engineer-in-charge and 608,002 Kg 135 116 7 03 74 561 138 8 39 04 276 1.19
painted with two or more coats of epoxy paint (Shop
drawings shall be submitted by the contractor to the
Engineer-in-charge for approval before execution). The
frame work shall be fixed in true horizontal & vertical
lines/planes. (Only structural steel frame work shall be
measured for the purpose of payment, stainless steel
cramps shall be paid for separately and nothing extra
shall be paid).
Page 56 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Page 57 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Note:- 1
Page 58 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Note:- 2
The following performance test are to be conducted on
structural glazing system if area of structural glazing
exceeds 2500 Sqm from the certified laboratories
accreditated by NABL(National Accreditation Board for
Testing and Calibration Laboratories), Department of
Science & Technologies, India. Cost of testing is payable
separately. The NIT approving authority will decide the
necessity of testing on the basis of cost of the work, cost
of the test and importance of the work. Performance
Testing of Structural glazing system Tests to be
conducted in the NBL Certified laboratories
Page 59 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
14.8 NSR Extra for Ceramic fritting of approved pattern, colour and
quality on one side of inner glass of vision panel (IGUs).
Area of Fritting on glass shall be measured for payment. 850 Sqm 298 720 6 12 000 850 7 22 500 1.18
14.9 25.4 Extra for openable side / top hung vision glass panels
(IGUs) including providing and supplying at site all
accessories and hardwares for the openable panels as
specified and of the approved make such as heavy duty
stainless steel friction hinges, min 4 -point cremone
locking sets with stainless steel plates, handles, buffers
etc including necessary stainless steel screws/ 7,297 Sqm 2942 3 060 2 23 28 820 3 611 2 63 49 467 1.18
fasteners, nuts, bolts, washers etc. all complete as per
the Architectural drawings, as per the approved shop
drawings, as specified and as directed by the Engineer-
in-Charge.
Page 60 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Page 61 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Page 62 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Page 63 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
14.15 NSR Providing and fixing aluminium work for sunshades over
existing facade system with extruded built up standard
tubular sections/ appropriate Z sections and other
sections of approved make. The aluminium quality as
per grade 6063 T5 or T6 as per BS 1474, including
super durable powder coating of 60 to 80 micron
conforming to AAMA 2604 of required colour and shade
as approved by Engineer in charge, fixing with
necessary nuts bolts/ dash fasteners of required dia and
size, including. Aluminium sections shall be smooth, rust
free, straight, mitred and jointed mechanically wherever 31,343 Kg 390 378 1 18 47 654 446 1 39 78 978 1.18
required including cleat angle all complete as per
architectural/ shop drawings and the directions of
Engineer-in-charge. The cost to include all materials,
labour, T&P, scaffoldig etc to carry out the work at all
heights. Weight of aluminium fixed at site shall be
measured for payment.
Page 64 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Page 65 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Paving Sqm
considering 13.33 25 333
avg. 75 mm
Total 6375
Plastic kg
11 70 770
Addetive
Making Cum 1 200 200
transport Cum 1 500 500
Paving Sqm
considering 13.33 25 333
avg. 75 mm
total 7653
Page 66 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
15.8.1 16.91.1 60mm thick Cement concrete paver block of M-35 grade No approved make given
48,357 Sqm 756 730 3 53 00 610 920 4 44 88 440 1.26
with approved colour, design & pattern.
Paver (Local Sqm
1.00 500 500
Purchase)
Wastage % 5.00 25
Sand Cum 0.06 1746 105
Labour Sqm 1.00 100 100
Total 730
15.8.2 16.91.2 80mm thick Cement concrete paver block of M-30 grade No approved make given
41,698 Sqm 639 888 3 70 27 824 1 119 4 66 60 062 1.26
with approved colour, design & pattern.
Paver (Local Sqm
1.00 650 650
Purchase)
Wastage % 5.00 33
Sand Cum 0.06 1746 105
Labour Sqm 1.00 100 100
Total 888
15.9 11.45 Providing and laying 500mm x 500mm x 40mm thick Turf
paver (Turfpave XD) on 150 mm thick sub grade of
compacted bed of 20 mm thick nominal size stone
aggregate and base course and filling with 150mm thick
zone V sand, including spreading, well ramming, 83,668 Sqm 1113 957 8 00 70 276 1 206 10 09 03 608 1.26
consolidating and finishing smooth etc. all complete as
per direction of Engineer-in-charge.
For 1 Sqm
Filling sand Cum 0.15 1270 191
Aggregate Cum 0.15 988 148
Turf Paver Sqm 1 368 368
Labour i/c Sqm 1 250 250
Sand Filling,
Aggregate
laying
Total 957
Page 67 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
15.11 16.62 Providing and applying 2.5mm thick road marking strips
(retro-reflective) of specified shade/ colour using hot
thermoplastic material by fully/ semi automatic
thermoplastic paint applicator machine fitted with profile
shoe, glass beads dispenser, propane tank heater and
profile shoe heater, driven by experienced operator on
road surface including cost of material, labour, T&P, 8,380 Sqm 391 312 26 14 560 393 32 93 340 1.26
cleaning the road surface of all dirt, seals, oil, grease
and foreign material etc. complete as per direction of
Engineer-in-charge and accordance with applicable
specifications.
15.12 16.90 Providing and laying tactile tile (for vision impaired
persons as per standards) of size 300x300x9.8mm
having water absorption less than 0.5% and conforming
to IS: 15622, of approved make in all colours and
shades in outdoor floors such as footpath, court yard,
multi modals location etc., laid on 20mm thick base of
cement mortar 1:4 (1 cement : 4 coarse sand) in all 1,709 Sqm 1450 796 13 60 364 1 003 17 14 127 1.26
shapes & patterns including grouting the joints with white
cement mixed with matching pigments etc. complete as
per direction of Engineer-in-Charge.
Tile Sft 1 40 40
Wastage % 10 4
CM sft 1 10 10
WCP sft 1 2 2
Labour sft 1 18 18
Total 74
For 1 Sqm 796
Page 68 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
15.13 16.80 Construction of dry lean cement concrete sub base over
a prepared sub- grade with coarse and fine aggregate
conforming to IS:383, the size of coarse aggregate not
exceeding 25 mm, aggregate cement ratio not to exceed
15:1, aggregate gradation after blending to be as per
specifications, cement content not to be less than 150
Kg/cum, optimum moisture content to be determined
during trial length construction, concrete strength not to
be less than 10 Mpa at 7 days, mixed in a batching 3,127 Cum 3332 2 650 82 86 550 3 339 1 04 41 053 1.26
plant, transported to site, for all leads & lifts, laid with a
mechanical paver, compacting with 8-10 tonne vibratory
roller, finishing and curing etc. complete as per direction
of Engineer in-charge.
Page 69 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
16.4 2.7 Fine dressing of the ground. 32,284 Sqm 2 2 69 411 2 64 568 1.10
Page 70 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
16.8 Digging holes in ordinary soil and refilling the same with
the excavated earth mixed with manure or sludge in the
ratio of 2:1 by volume (2 parts of stacked volume of
earth after reduction by 20% : 1 part of stacked volume
of manure after reduction by 8%) flooding with water,
dressing including removal of rubbish and surplus earth,
if any, with all leads and lifts (cost of manure, sludge or
extra good earth if needed to be paid for separately) :
16.8.1 2.14.1 Holes 1.2 m dia and 1.2 m deep 2,993 Each 237 237 7 08 593 260 7 78 180 1.10
Page 71 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Page 72 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Page 73 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Page 74 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
16.12 2.34 Providing & laying Selection no. 1 grass turf with earth
50mm to 60mm thickness on existing ground prepared
with proper level and ramming with required tools
wooden and than rolling the surface with light roller 7,357 Sqm 77 77 5 66 489 85 6 25 345 1.10
make the surface smoothen and light watering the same,
as per direction of officer in charge
Page 75 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Page 76 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
17.3 NSR Providing & fixing of EDGELIT Signage with battery back
up made from acrylic sheet of 8 mm thickness laser
engraved, transformer to be inbuilt Maintenance-free
sealed nickel cadmium battery including • 120V/277V AC
Operation • Crystal clear acrylic • Engraved letters
100,000 Sqcm 6 5 4 60 000 5 5 00 000 1.18
increase visibility Anodized aluminum faceplate • Field
applied chevron directional indicators simplify installation
• Energy-saving LED lamps • UL listed
17.6 NSR Providing & Fixing Wall Mounted Nonlit Fire Exit 61cm x
23 cm Internal sign of approved make & made of 10mm
Acrylic with the required text matters stuck on it with
plotted self adhesive vinyl & Mounted on 3mm
Aluminium Composit Panel bracketed at suitable 1,000 Each 1967 1 628 16 28 000 1 921 19 21 000 1.18
locations including necessary fittings & fastening etc.
complete & as directed by The Engineer in charge.
Page 77 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
17.8 NSR Providing & Fixing Wall Mounted Nonlit Utility 15x15 cm
Internal sign of approved make & made of 10mm Acrylic
with the required text matters stuck on it with plotted self
adhesive vinyl & Mounted on 3mm Aluminium Composit
Panel bracketed at suitable locations including 1,000 Each 358 296 2 96 000 349 3 49 000 1.18
necessary fittings & fastening etc. complete & as
directed by The Engineer in charge.
17.10 NSR Providing & Fixing Wall Mounted Nonlit Utility 61x23 cm
Internal sign of approved make & made of 10mm Acrylic
with the required text matters stuck on it with plotted self
adhesive vinyl & Mounted on 3mm Aluminium Composit
Panel bracketed at suitable locations including 1,000 Each 1967 1 628 16 28 000 1 921 19 21 000 1.18
necessary fittings & fastening etc. complete & as
directed by The Engineer in charge.
17.11 NSR Providing & Fixing Wall Mounted Nonlit directory sign
305x122 cm of approved make & made of 10mm Acrylic
with the required text matters stuck on it with plotted self
adhesive vinyl & Mounted on 3mm Aluminium Composit
Panel bracketed at suitable locations including 50 Each 73918 62 733 31 36 650 74 025 37 01 250 1.18
necessary fittings & fastening etc. complete & as
directed by The Engineer in charge.
17.12 NSR Providing & Fixing Wall Mounted Nonlit directory sign
91x61 cm of approved make & made of 10mm Acrylic
with the required text matters stuck on it with plotted self
adhesive vinyl & Mounted on 3mm Aluminium Composit
Panel bracketed at suitable locations including 50 Each 22891 18 495 9 24 750 21 824 10 91 200 1.18
necessary fittings & fastening etc. complete & as
directed by The Engineer in charge.
Page 78 of 85
DSR NSR
S. No Code No Item Description Qty Unit Rate Analysis Cost Amount Quote Amount %
Rate Rate
Page 79 of 85
Construction of Hospital and Academic Campus at All India Institute of Medical Scie
(Maharashtra)
LIST OF MATERIALS
S. No. Description Unit Rate Approved Makes
i/c
taxes
1 Cement OPC (43 grade) bags ACC, Ultratech, Vikram, Shree Cement,
Ambuja, Jaypee Cement, Century Cement &
J.K.Cement.
10 Fly Ash Kg
16 RMC M-25 with 330 kg cement cum ACC, Ultra tech,L&T, Lafarge.
17 RMC M-25 with fly ash with 330 cum ACC, Ultra tech,L&T, Lafarge.
kg cement
18 RMC M-30 with fly ash with 340 cum ACC, Ultra tech,L&T, Lafarge.
kg cement
19 RMC M-35 with ash with 350 kg cum ACC, Ultra tech,L&T, Lafarge.
cement
23 18 mm thick flamed Granite Jet Sft Avg of three colour flame finished
Black, Cherry Red, Elite Brown
cat's eye
24 18 mm thick Granite - Gang Saw Sft Avg of South and Rajasthan
Cut
40 40 40
90 90 80
35 35 27
4.4 4.4
3700 4275
3200 2800
150 150
78 78
33 33 31
32 32 30
35 35 33
33 33 33
31 31 36.5
30 30 38
40 40
375 375
52 52
78 78 Dholpur Stone
50 50 35
7000 7000
50 50
2000
100