Professional Documents
Culture Documents
METHODOLOGY
PHYSICAL METHOD
INSTALLATION OF MATERIALS
parameters and material can already be found at the spring source so there's
SPRING DISCHARGE
principally for the purposes of flow transport and water quality protection. Flow
may be diverted from an open spring pond into a distribution pipe or channel,
or the spring source may be covered and diverted through a closed piping
stopwatch and volume cylinder may be the most practical option if the flow line
not possible at the spring source itself. Daily monitoring will be conducted as
much as possible ,the needed data on the past years will be simulated by the
RAINFALL MEASUREMENT
The rainfall data measured using rain gauge installed at the spring source
area, daily monitoring will be conducted as much as possible from the time