Professional Documents
Culture Documents
2 Control valve
Ÿ Type : 11 spool sectional block servo Ÿ The main control valve consists of the
hydraulic operated blocks for boom, arm, bucket, slew, travel,
Ÿ Circuit : parallel option and straight travel, relief valve,
Ÿ Relief pressure : 210 kgf/cm2 (2982 psi) orifice.
Ÿ The valve directs the proper oil flow to the
actuator by the external servo hydraulic
signal.
3 Slew motor
Ÿ Type : fixed displacement swash plate Ÿ The fixed displacement hydraulic motor
piston motor rotates the superstructure using the
Ÿ Rated pressure : 190 kgf/cm2 (2702 psi) hydraulic force from main control valve.
Ÿ Displacement : 26.4 cc/rev
Ÿ Reduction ratio : 19.8
4 Travel motor
Ÿ Type : variable displacement swash Ÿ Two variable displacement motors provide
plate piston motor the tractive effort using the hydraulic
Ÿ Rated pressure : 210 kgf/cm2 (2986 psi) power from main control valve via the
Ÿ Displacement : 20.9/39.0 cc/rev center passage.
Ÿ Reduction ratio : 53.706 Ÿ The brake valve and the mechanical
parking brake are installed in the motor to
prevent machine slippage on a slope
within a specified angle.
5 Remote control
valve (joystick) Ÿ Hydraulic pressure reducing valve type Ÿ The remote control valve changes the
Ÿ perating force : 1.2 kgf position of the spools in the main control
valve to operate the attachments.
6 Remote control
valve (do er Ÿ Hydraulic pressure reducing valve type Ÿ The remote control valve changes the
blade) Ÿ perating force : 1.21 kgf do er blade spool position in main control
valve.
7 Solenoid valve
block Ÿ 3 spool electrical solenoid valve Ÿ The solenoid valve block controls the
Ÿ oltage : DC 12 servo hydraulic oil passage from the servo
hydraulic pump to the remote control
valve to activate the following functions.
¡ Safety lockout
¡ Traveling speed control
¡ Hammer
8 il cooler
Ÿ Type : air cooled Ÿ Maintain the hydraulic oil temperature
between 60 ∼ 80 C (140 ∼ 176 F).
9 oom cylinder
10 rm cylinder Ÿ Type : double acting Ÿ Changes the hydraulic power into
Ÿ orking pressure : 210 kgf/cm² (2986 mechanical power to operate the
11 ucket cylinder
psi) attachment.
12 lade cylinder Ÿ Cushion
13 Center passage
Ÿ 8 paths Ÿ The center passage is mounted at the
center of the superstructure rotation and
makes the hydraulic connection between
the upper lower structures.
15 Return filter
Ÿ 150 mesh Ÿ Filter the foreign particles from the
hydraulic system.