All proposed hoses should be designed, built and tested by to the requirements of the
O.C.I.M.F. International Hose Standard 5th Edition 2009 – GMPHOM 2009 under a quality system in
Accordance with ISO 9001:2015
Nominal bore--(mm) 250(10 “) ID
SUBMARINE SINGLE CARCASS CONSTRUCTION with Over Bending Capabilities Lining in NBR rubber suitable for liquid petroleum products, Reinforcement: Multiple plies of wire STEEL cord with one embedded helical body steel wire. Cover in chloroprene black synthetic rubber resistant to oil, abrasion, sunlight and sea water penetration Pressure rating: 21 bar Minimum burst pressure: 105 bar Flange type: ANSI B16.5 Class 150 WN FF Flange material: ASTM A105N / Hot dip galvanized (600 g/m2) Nipple material: ASTM A106N gr. A/B Maximum flow velocity: 21m/s Fluid Temperature range: -10°C to 82°C Ambient Temperature range according to GMPHOM 2009 Fluid Product: Liquid Petroleum products Maximum Temporary Elongation according to GMPHOM 2009 Maximum Permanent Elongation according to GMPHOM 2009 Minimum Bending Radius: 3 x ID Electrically: discontinuous
S/N DESCRIPTION QUANTITY
1 1st off, one end reinforced, single carcass, submarine hose-PLEM 10" I.D. 3 x 12.0 m long End Reinforced without float collars-Electrically Discontinuous 2 Mainline, single carcass, submarine hose 10" I.D. x 12.0 m long - Main 9 Line without float collars Electrically Discontinuous 3 Tanker Rail Hose, single carcass, submarine hose 3 10" I.D. x 12.0 m long .Tanker Rail Electrically Discontinuous 4 7/8" x 4 1/2” inch (M 22X 120mm) - STUD BOLTS C/W NUTS - ASTM B7 / 200 2H – PTFE coated 5 Aramid Fiber Gaskets / Spiral wound gaskets 10 “x 150# 30