Professional Documents
Culture Documents
General Description
The model FKB VGU-09 is developed to control and block the fluid sewage. They are light equipments, built
in formed steel sheets, structure profile and/or welded sheets. With perimetral sealing system through
elastomer, this model ensures Class III / IV tightness in both directions, with no accumulation point, flowing
loss, low maintenance rating and high versatility, provided that can be manufactured with Square or Circle
passages. The valves are entire provided, including all the accessories as: sensors, directional valve,
protection bellows and tubing, etc.
Application
Liquid
Pulp or Slurry
Powder and Grains
Suspended solids
Abrasion
Similar
Quality
- ISO 9001:2008 Certified Company;
- Petrobras CRCC Certified Company;
- FKB is a manufacturer of valves over 13 years that enabled us to supply to many companies in different
areas such as: Water Treatment, Steel Mill, Petrochemistry, Mining, Paper and Pulp, etc;
- All equipments provided by FKB are accompanied by a certificate of inspection and testing, performed in
factory before delivery.
Constructive Description
Standard Construction
FKB Standard or built on request, submitted to customer evaluation.
Estrada Do Akama, 1300 – Lambari – Guararema – SP – 08900-000 Page:
Fone: 55 11 2345.5890 Site: www.fkbvalvulas.com.br 1 of 3
FKB INDÚSTRIA DE EQUIPAMENTOS LTDA.
Body
Built in plain strong steel, on metal sheets or structure profile, in order to be strong enough to the maximum
pressure on the valve. The strength of the structure assures no damaging to the equipment during
transportation, installation and operation. Built on flat steel plate, designed in 4 minimum factor of safety as
the tension (pull) and 2 as the minimum factor of compressive and shear force.
Covered Transition
Ring built on stainless steel that eliminates the contact between monobloc body and fluid, ensuring no body
wearing and possible quick and easy substitution of the ring, when necessary.
Gate
Built on flat steel plate, designed in 4 minimum factor of safety as the tension (pull) and 2 as the minimum
factor of compressive and shear force.
Stem
Made of stainless steel and designed to support the operation of the valve under maximum pressure, then
the level of slenderness is less than 200.
Hand Starter: Stem is designed to transmit, at least, twice the manual engine output.
Pneumatic, Hydraulic and Electrical: Stem is designed to transmit, at least, 1.25 times the actuator effort
output.
Actuators
Hand Wheel: Designed to operate the valve under maximum pressure with application of manual effort in the
mechanism up to 18.15 kgf (178N). In case of using Gear Box, it will be sized for the force, at least, 110% of
rated specified pressure.
Pneumatic Actuator, Hydraulic or Electric: Designed for the force, at least, 110% of rated specified pressure.
Note: Other Actuators on request
Working Pressure
DN Pol. 2” 2.1/2” 3” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24” 28” 30” 32”
(Ø) mm 50 65 80 100 125 150 200 250 300 350 400 450 500 600 700 750 800
CWP (bar) 10 10 10 10 10 10 8 6 6 6 6 4 4 4 4 4 4
CWP: Maximum working pressure body from 0ºC to 80C
Note: Other Gaude or Pressure on request.
-Hydrostatic test according to ISO 5208
-Hydrostatic test-body: 1.5 x CWP
-Hydrostatic test-sealing: 1.1 x CWP
Material
ITEM DESCRIPTION MATERIAL
1 Structure ASTM A36 / ASTM A240 TP 304L / ASTM A240 TP 316L
2 Cover Ring ASTM A36 / ASTM A240 TP 304L / ASTM A240 TP 316L
3 Gate ASTM A240 TP 304L / ASTM A240 TP 316L
4 Passage Sealing EPDM / Viton / / UHMW / PTFE
5 Superior Sealing Synthetic Fiber with PTFE / PTFE Pure / Graphite
6 Screws – Box Packing Carbon Steel / Stainless Steel
7 Cursor Brass / Bronze (Resistant to corrosion)
8 Fixed or Rising Stem ASTM A276 TP 304 / ASTM A276 TP 316
9 Table ASTM A36 / ASTM A240 TP 304L / ASTM A240 TP 316L
Installation
All equipments provided by FKB are accompanied by an Installation, Operation and Maintenance manual. In
case of doubt, please contact us.