Professional Documents
Culture Documents
Course Content
RN31632EN30GLA0 1
Parameter Configuration
Parameter Configuration:
Module Objectives
RN31632EN30GLA0 2
Parameter Configuration
CMOB
RNC WSMLC
IUCS/IUPS IUR
IPQM
WRAB
COCO HOPG/L
IPNB WBTS HOPI
TQM HOPS
ADJD
FMCS ADJS
WCEL
FMCI ADJI
FMCG ADJG/L
COCO = Radio Network Connection Configuration
WANE = WCDMA Authorized Network WLCSE = WCDMA Location service entity
3 © Nokia Siemens Networks WSG = WCDMA subscriber group
RN31632EN30GLA0 WSMLC = WCDMA Serving Mobile Location Center
CMOB = Congestion Management OBject ADJD = detected adjacency
RN31632EN30GLA0 3
Parameter Configuration
• IUPS / IUPS IP, IUCS / IUCS IP, IUR, IUO have been introduced to simplify management
• IPNB relates to optional feature “IP-based Iub for Flexi”
• TQM relates to optional feature “Iub Transport QoS”
• WRAB parameters are used by Admission Control
• IPQM relates to IP transport on Iu
• RNC = Radio Network Controller* • CBCI = Cell Broadcast Center Indicator for SAB feature
• WBTS = WCDMA Base Station • COCO = Radio Network Connection Configuration
• WCEL = WCDMA Cell • CMOB = Congestion Management OBject
• ADJ = Adjacency for WCDMA cell • WANE = WCDMA Authorized Network
• ADJS = intra-frequency adjacency • WSG = WCDMA subscriber group
• ADJI = inter-frequency adjacency • WLCSE = WCDMA Location service entity
• ADJG = inter-system adjacency GSM • WSMLC = WCDMA Serving Mobile Location Center
• ADJL = inter-system adjacency LTE • IPNB = IP NodeB
• ADJD = detected adjacency • IPQM = IP transmission QoS
• HOP = Handover Path • TQM = Transmission Quality Management
• HOPS, HOPI, HOPG, HOPL • WRAB = WCEL RAB parameters
• FMC = Frequency Measurement Control • PFL = Preferred Frequency Layer (for MBLB feature)
FMCS, FMCI, FMCG • VBTS, VCEL = Virtual BTS / Cell
RN31632EN30GLA0 4
Parameter Configuration
RNC Object
• The logical object of the Radio Network Controller
• It can have up to 2800 WBTS objects (requires RNC 2600)
• In the RNC object the following interfaces are defined: Iu-PS, Iu-CS & Iur
• The logical object are hierarchically related to each other, therefore it is not possible to
create any other object before RNC creation.
Remark:
from RU30 on, the RNC
object is split to several
new Object types, e.g.:
RNC, RNAC, RNFC,
RNHSPA, RNMOBI,
RNPS, RNRLC, RNTRM,
5 © Nokia Siemens Networks RN31632EN30GLA0
RN31632EN30GLA0 5
Parameter Configuration
WBTS Object
• The logical object of the WCDMA Base Station (Node B). A WBTS can have up to 24
WCDMA cells, 1 COCO and 1 IPNB object.
• If Iub transport QoS is used, WBTS connects to 1 TQM object
RN31632EN30GLA0 6
Parameter Configuration
WCEL object
• The logical object of the WCDMA Cell is created to define the configuration of the
WCDMA Node B site. In 1 RNC database there can be 2800 WCELs.
RN31632EN30GLA0 7
Parameter Configuration
Handover Path
HOPx
• The Handover Path object stores mainly Cell Reselection & Intra-Frequency HHO
parameters. One HOPx can be related to several Adjacency objects.
• The maximum number of HOPx objects within 1 category is 100.
• E.g. for different type of cells (urban, rural, macro/micro/pico)
• HOP Types:
• HOPS — object for intra-frequency
Handover Path
• HOPI — object for inter-frequency
Handover Path
• HOPG/L — object for inter-system
Handover Path (GSM/LTE)
RN31632EN30GLA0 8
Parameter Configuration
RN31632EN30GLA0 9
Parameter Configuration
Adjacencies
ADJx
• Adjacencies for WCDMA cell refers to a Handover relationship between two cells.
They are defined for neighbouring cells.
• ADJS — object for intra-frequency Adjacency
• ADJI — object for inter-frequency Adjacency
• ADJG/L — object for inter-system Adjacency (GSM/LTE)
• ADJD — object for detected intra-frequency Adjacency
RN31632EN30GLA0 10
Parameter Configuration
Adjacencies (ADJx)
Intra Frequency Inter Frequency Inter System
IntraFreqNcellCI InterFreqNcellCI GSMncellBandIndicator
IntraFreqNcellEcNoOffset InterFreqNcellLAC GSMncellBCC
IntraFreqNcellDERR InterFreqNcellTxPwrRACH GSMncellBCCH
IntraFreqNcellLAC InterFreqNcellMCC GSMncellCI
IntraFreqNcellTxPwrRACH InterFreqNcellMNC GSMncellLAC
IntraFreqNcellMCC InterFreqNcellMNCLength GSMncellTxPwrMaxRACH
IntraFreqNcellMNC NrtHopiIdentifier GSMncellMCC
IntraFreqNcellMNCLength InterFreqNcellScrCode GSMncellMNC
HSDPAHopsIdentifier InterFreqNcellRNCid GSMncellNCC
NrtHopsIdentifier InterFreqNcellRAC NrtHopgIdentifier
IntraFreqNcellScrCode RtHopiIdentifier RtHopgIdentifier
IntraFreqNcellRNCid InterFreqNcellTxDiv ADJGId
IntraFreqNcellRAC InterFreqNcellUARFCN
RtHopsIdentifier ADJIId
IntraFreqNcellTxDiv
ADJSId
Not a complete list
11 © Nokia Siemens Networks RN31632EN30GLA0
RN31632EN30GLA0 11
Parameter Configuration
RN31632EN30GLA0 12
Parameter Configuration
RN31632EN30GLA0 13
Parameter Configuration
RN31632EN30GLA0 14
Parameter Configuration
RN31632EN30GLA0 15
Parameter Configuration
WCEL to FMCx
4x3+1+1
RN31632EN30GLA0 16
Parameter Configuration
COCO / IPNB
WRAB
• When IP transport is used on Iub, the
COCO HOPG
IPNB object collects related parameters
IPNB WBTS HOPI
like:
TQM HOPS
• IP address of NodeB
• SCTP port numbers of C-NBAP and D- ADJD
NBAP FMCS ADJS
WCEL
• DiffServ Code Points FMCI ADJI
FMCG ADJG/L
RN31632EN30GLA0 17
Parameter Configuration
TQM / WRAB
RN31632EN30GLA0 18
Parameter Configuration
IPQM / CMOB
RN31632EN30GLA0 19
Parameter Configuration
• WANE & WSG MO groups are for the IMSI Based HO, which is optional feature
• WANE set contain PLMN id where UE is allowed to make handover.
• WSG object should be created to every subscriber (PLMN id) visiting in network and it maps subscriber
(PLMN id) to certain WANE sets
AuthorisedNetworkId GSMRoaming
AuthorisedNetworkList HomePLMN WSG-
WANE- AuthorizedNetwork PLMN HomePLMNMCC WCDMA
WCDMA AuthorizedNetworkMCC HomePLMNMNC subscriber
Authorised AuthorizedNetworkMNC HomePLMNMNCLenght group
Networks AuthorizedNetworkMNCLengh OperatorName Parameters
Parameters Technology SubscriberGroupid
WANEChangeOriging WSGAuthorisedNetworkId
WANEName WSGChangeOriging
- WSMLC & WLCSE object groups are for Location based service. LCS is RAN04 feature
- WSMLC: WCDMA Serving Mobile Location Center, represents a logical object with RNC specific
mobile location center parameters
- WLCSE: WCDMA Location service entity, represent a logical object with WCEL specific location
parameters
ConfAreaLevel AntennaBearing; AntHPBW
WSMLC-WCDMA AntennaCoord; CovType; WLCSE-WCDMA
RNCDelayTolRespTime
Serving RNCLowDelayResponseTime EnvCharact; MaxCellBackRad Location Service Entity
Mobile Location Center WSMLCChangeOrigin MaxCellRad; RepeaterExist
WSMLCid WLCSEChangeOrigin
WLCSEUtranCellId; WLCSEid
20 © Nokia Siemens Networks RN31632EN30GLA0
RN31632EN30GLA0 20
Parameter Configuration
HSDPAHopsIdentifier
HSDPAHopsIdentifier == 66
WCEL RTwithHSDPAHopsIdentifier
RTwithHSDPAHopsIdentifier == 33 HOPS HOPSid = 1
(NRT)
NrtFmcsIdentifier
NrtFmcsIdentifier == 33
WCEL Each
Each ADJS
ADJS has
has associated
associated 11 HOPS
HOPS for
for NRT,
NRT, 11 for
for RT
RT
RtFmcsIdentifier
RtFmcsIdentifier == 40
40
&
& 22 for
for HSDPA,
HSDPA, sets
sets can
can be
be reused
reused for
for other
other cells.)
cells.)
HSDPAFmcsIdentifier
HSDPAFmcsIdentifier == 50
50
RN31632EN30GLA0 21
Parameter Configuration
Parameter count
RN31632EN30GLA0 22
Parameter Configuration
Parameter Dictionary
RAS06 Example:
PtxPrimaryCPICH
-10..50; 0.1; 33 dBm
(Range; Step; Default)
RN31632EN30GLA0 23
Parameter Configuration
• Radio network parameters are managed via Netact OSS or directly via Element
Manager functionality
• Usage of Netact plan Netact CM
RNC Element
edit, analysis and Manager
tools
activation tools
recommended Netact
Database
Re
ad
on
ly
Recommended
rig
h ts
RNW
Database
RN31632EN30GLA0 24
Parameter Configuration
RN31632EN30GLA0 25
Parameter Configuration
RN31632EN30GLA0 26
Parameter Configuration
RN31632EN30GLA0 27
Parameter Configuration
WCEL- ADJS
RN31632EN30GLA0 28
Parameter Configuration
Version control
RN31632EN30GLA0 29