Professional Documents
Culture Documents
Given:
Find:
4. Determine ultimate soil pressures based on U = 1.2D + 1.6H (verify less than 2.5 x
allowable)
5. Design reinforcing steel (As required and select economical bar sizes and spacing) for
the following:
A. The wall at the top of footing
B. The top heel rebar
C. The bottom toe rebar
D. The key rebar
E. Longitudinal rebar in the footing and wall
6. Draw a sketch of the wall showing the reinforcing steel. Call out sizes of bars, spacing
and clear distances from the face of concrete.
Page 1 of 1