Professional Documents
Culture Documents
Explain with the help of suitable diagrams, how a D.C.Potentiometer can be used
1,5,1
b. for:(i) Calibration of Voltmeter (ii) Calibration of an Ammeter 5 3 3,4 1-3
2
(iii) Calibration of Wattmeter
(i) What are the advantages and disadvantages of a Maxwell bridge 1,5,1
c. 5 3 3,4 1-3
0
(ii) Explain how capacitance can be measured by the use of a Schering bridge 1,6,1
5 3 3,4 2
with a neat diagram and further derive the unknown capacitance at balance 0
d. Describe with the help of diagram the loss of charge method for determining the 5 3 3,4 3 2
insulation resistance of a length of a cable.
PART – B
Answer ALL questions (25 marks)
Explain the constructional features of a flux meter. Show that for a flux meter
N E = K (Ѳ2 – Ѳ1) , Where N is the number of turns on the search coil used, _ is 1,6,1
2. a. 7 4 3,4 1
change in flux, Ѳ1 is the initial reading in the flux meter and Ѳ2 is the final 0
reading in the flux meter and K is a constant.
Explain the “Lloyd Fisher square “method of measuring iron losses in 1,5,1
b. 5 4 3,4 1-3
ferromagnetic material. 2
Explain with the help of a neat diagram, a method for the determination of B-H
1,5,1
c. Curve of a magnetic sample. Point out various sources of errors and methods of 8 4 4 1-3
0
minimizing them
Explain with neat sketch of measurement of illumination by pohoto conductive 1,6,1
e 5 4 1,2 2
transducer. 0