Professional Documents
Culture Documents
Individual Assignment 1 08 12 2017
Individual Assignment 1 08 12 2017
Exercises.
Fig. A
6. Using angle bisection, draw a circle of radius 30 mm and divide it into 8 equal parts.
7. Draw two lines AB and AC making an angle of 75⁰. Draw a circle of 25 mm radius touching
them.
8. Draw a line AB of any length. Mark a point O at any distance of 25 mm from AB. With O as
centre, draw a circle of 40 mm diameter. Describe another circle (i) of 20 mm radius,
externally touching the circle and line AB. (ii) of 35 mm radius, touching AB and the circle,
internally.
Page 1 of 3
9. Draw two circles of 20 mm and 30 mm radii respectively with centres 60 mm apart.
(i) Describe a third circle of 50 mm radius touching the two circles and
(a) outside them;
(b) including the 20 mm circle;
(c) including the 30 mm circle.
(ii) Describe a circle of 75mm radius, touching both circles and including
10. Carefully redraw the following figures below using a full sized scale. All dimensions are in
centimetres. All construction lines must be clearly shown.
Fig. B
10
Fig. C
Page 2 of 3
Fig. D
Fig. E
Page 3 of 3