Professional Documents
Culture Documents
HEATING CONTROLS
Spring return action
■
Three position operation
■
Powerhead replaceable without
draining down
■
Manual lever for filling/draining down
■
Quiet operation, minimal power
consumption
■
Provides electrical output to
boiler and/or pump APPLICATION
The V4073A Valve has been designed to control the flow of water
in domestic central heating systems, where both radiator and hot
water cylinder circuits are pumped. It is typically suited for small
OPTIONS to medium sized installations.
■
The V4073A Mid-position Diverter Valve should be used in
3
22mm/28mm or /4"/ 1" connections conjunction with a room thermostat and cylinder thermostat to
■ provide full temperature control of a conventional, fully pumped
Replacement motor central heating installation. When used in this way, the control
■ system is known as Sundial Y Plan and the components can be
connected together using the Sundial Plan Wiring Centre which
Replacement powerhead
has dedicated terminations and there is no need for a wiring
■
diagram.
Replacement ball and
‘O’ ring kit An alternative method of wiring is to use the Honeywell 10-way
Junction Box (42002116-001) together with the Honeywell
Sundial Plans Wiring Booklet.
4.21
© Honeywell Control Products and Systems, Issue 10
0014_Section 4_dft10_v4.qxd:Section 2_dft9 15/10/07 16:20 Page 44