Professional Documents
Culture Documents
Chi tiết bên ngoài và chân cảm biến main thắng DRF450 PDF
Chi tiết bên ngoài và chân cảm biến main thắng DRF450 PDF
The accumulator charging valve distributes oil from the hydraulic oil
1 2
13 pump between pressure storage and cooling of the wheel brakes. The
accumulator charging valve is fitted on the beam in front of the gear-
12 3 box in the engine compartment.
The accumulator charging valve stores pressure by guiding the oil to
11 4
the accumulators. The wheel brakes are cooled by oil being guided to
the drive axle cooling circuit and then on to the brake system cooler.
10 5
The accumulator charging valve prioritises charging of the accumula-
6 tors above cooling. A restriction of the charging means that a small
9 quantity of oil also flows to cooling during accumulator charging. At
idling speed the flow from the pump is so small that all oil flows to pres-
8 sure storage.
The drain valve (position 11) is used to relieve the pressure in the ac-
7
cumulators to the tank. The valve opens a connection between the ac-
cumulators and the wheel brake’s cooling circuit. The oil is drained
through the wheel brake to the tank.
There is a measuring outlet for measuring the accumulator pressure
000431
NOTE
Read the safety instructions for oil before working, see section
B Safety.