Professional Documents
Culture Documents
The accumulator charging valve distributes oil from the hydraulic oil
1 2
13 pump between pressure storage and cooling of the wheel brakes. The
accumulator charging valve is fitted on the beam in front of the gear-
12 3 box in the engine compartment.
The accumulator charging valve stores pressure by guiding the oil to
11 4
the accumulators. The wheel brakes are cooled by oil being guided to
the drive axle cooling circuit and then on to the brake system cooler.
10 5
The accumulator charging valve prioritises charging of the accumula-
6 tors above cooling. A restriction of the charging means that a small
9 quantity of oil also flows to cooling during accumulator charging. At
idling speed the flow from the pump is so small that all oil flows to pres-
8 sure storage.
The drain valve (position 11) is used to relieve the pressure in the ac-
7
cumulators to the tank. The valve opens a connection between the ac-
cumulators and the wheel brake’s cooling circuit. The oil is drained
through the wheel brake to the tank.
There is a measuring outlet for measuring the accumulator pressure
000431
NOTE
Read the safety instructions for oil before working, see section
B Safety.