Professional Documents
Culture Documents
Descriptions:
◇ The KWM-50884 XXXXseries is a large emitting area (5.0mm diameter) LED sources
configured in a 64 dots 8×8 matrix array.
◇ These displays provide excellent reliability in bright ambient light.
◇ These devices are made with white dots and black surface.
Applications:
◇ Audio equipment.
◇ Instrument panels.
◇ Digital read out display.
+
+
PIN 1
COL. 1 2 3 4 5 6 7 8
ROW 1
KWM-50884ARGBB KWM-50884CRGBB
COL 1 2 3 4 5 6 7 8 COL 1 2 3 4 5 6 7 8
PIN PIN
2 1 32 30 31 3 5 4 29 27 28 6 22 11 12 13 21 20 19 14 15 16 18 17 2 1 32 30 31 3 5 4 29 27 28 6 22 11 12 13 21 20 19 14 15 16 18 17
NO. NO.
PIN PIN
ROW ROW
NO. NO.
1 26 1 26
2 25 2 25
3 24 3 24
4 23 4 23
5 10 5 10
6 9 6 9
7 8 7 8
8 7 8 7
Notes:
1.All dimensions are in millimeters (inches).
2.Tolerance is ±0.25(.010″)mm unless otherwise noted.
3.Specifications are subject to change without notice.
Reverse Voltage VR 5 5 5 V
Blue 15 30 ---
Ultra
--- 632 ---
Red
Peak Emission Wavelength λp Pure nm IF=20mA
--- 520 ---
Green
Blue --- 468 ---
Ultra
--- 624 ---
Red
Pure IF=20mA
Dominant Wavelength λd --- 525 --- nm
Green (Note 2)
Blue --- 470 ---
Ultra
--- 20 ---
Red
Spectral Line Half-Width △λ Pure nm IF=20mA
--- 35 ---
Green
Blue --- 25 ---
Ultra
--- 2.0 2.6
Red
Forward Voltage VF Pure V IF=20mA
--- 3.2 4.0
Green
Blue --- 3.2 4.0
Ultra
Red
Reverse Current IR Pure --- --- 50 µA VR=5V
Green
Blue
Notes:
1. Luminous intensity is measured with a light sensor and filter combination that
approximates the CIE eye-response curve.
2.The dominant wavelength (λd) is derived from the CIE chromaticity diagram and
represents the single wavelength which defines the color of the device.
100 100
60
50
40
25
20
0
300 400 500 600 700 800 0
1.4 1.6 1.8 2.0 2.2 2.4 2.6
Wavelength λp (nm) Forward Voltage VF (V)
100 100
10 10
1 1 0 1 2 3
-60 -40 -20 0 20 40 60 80 100 10 10 10 10
Ambient Temperature Ta (℃) Forward Current IF (mA)
40
30
25
20
10
0
0 20 40 60 80 100
Ambient Temperature Ta (℃)
100 50
30
50
20
25
10
0
300 400 500 600 700 800 0
2.7 2.9 3.1 3.3 3.5 3.7
Wavelength λp (nm) Forward Voltage VF (V)
100 100
10 10
1 1 0 1 2 3
-60 -40 -20 0 20 40 60 80 100 10 10 10 10
Ambient Temperature Ta (℃) Forward Current IF (mA)
40
30
25
20
10
0
0 20 40 60 80 100
Ambient Temperature Ta (℃)
100 50
30
50
20
25
10
0
300 400 500 600 700 800 0
2.7 2.9 3.1 3.3 3.5 3.7
Wavelength λp (nm) Forward Voltage VF (V)
100 100
10 10
1 1 0 1 2 3
-60 -40 -20 0 20 40 60 80 100 10 10 10 10
Ambient Temperature Ta (℃) Forward Current IF (mA)
40
30
25
20
10
0
0 20 40 60 80 100
Ambient Temperature Ta (℃)
5. Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand
whether the characteristics of the LEDs will or will not be damaged by repairing.
6. Caution in ESD
Static Electricity and surge damages the LED. It is recommended to use a wrist band or
anti-electrostatic glove when handling the LED. All devices equipment and machinery must be
properly grounded.
Spec No: W23088A/BRGB Rev No: V.2 Date:Sep/18/2009 Page: 9 OF 9
Approved: JoJo Checked: Wu Drawn: Sun
Lucky Light Electronics Co., Ltd. http://www.luckylightled.com