Professional Documents
Culture Documents
com
( ) Preliminary Specifications
Ϡ) Final Specifications
(Ϡ
Kelly Kao
_________________________________ ____________________________________
Eugene CC Chen
____________________________________
Reviewed By Project Leader
Cathy Cheng
_____________________________________
Prepared By PM
Reynold Chen
____________________________________
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Contents
No
CONTENTS
RECORD OF REVISIONS
1 GENERAL DESCRIPTION
3 ELECTRICAL SPECIFICATION
4 OPTICAL SPECIFICATION
5 MECHANICAL CHARACTERISTICS
6 PACKING
7 PRECAUTION
7-5 STORAGE
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Record of Revision
Version Date Page Description
0.1 2012/11/16 First release
1.0 2013/01/03 4 Remove Bezel Opening item.
4 Outline Dimension
16 Modify Gx,Gy,Bx,By,Wx,Wy Typ. Value.
1.1 2013/01/04 21 Mechanical Drawing
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
1. General Description
This specification applies to the 32.0 inch Color TFT-LCD SKD model T320XVN02.A. This LCD Open Cell Unit
has a TFT active matrix type liquid crystal panel 1,366x768 pixels, and diagonal size of 32.0 inch. This Open Cell
Unit supports 1,366x768 mode. Each pixel is divided into Red, Green and Blue sub-pixels or dots which are
arranged in horizontal stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray
scale signal for each dot.
* General Information
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3. Electrical Specification
The T320XVN02.A Open Cell Unit requires power input which is employed to power the LCD electronics and to
drive the TFT array and liquid crystal.
3-1-1: DC Characteristics
Value
Parameter Symbol Unit Note
Min. Typ. Max
LCD
Power Supply Input Voltage VDD 10.8 12 13.2 VDC
Power Supply Input Current IDD -- 0.39 0.53 A 1
Power Consumption PC -- 4.68 5.28 Watt 1
Inrush Current IRUSH -- -- 3 A 2
Permissible Ripple of Power Supply Input Voltage VRP -- -- VDD * 5% mVpk-pk 3
LVDS Differential Input High Threshold Voltage VTH +100 -- +300 mVDC 4
Interface
Differential Input Low Threshold Voltage VTL -300 -- -100 mVDC 4
3-1-2: AC Characteristics
Value
Parameter Symbol Unit Note
Min. Typ. Max
Receiver Clock : Spread Spectrum
Modulation range ʳ Fclk_ss ʳ Fclk
-3% ʳ -- ʳ Fclk
+3% ʳ MHzʳ 8
LVDS
Receiver Clock : Spread Spectrum
Modulation frequency ʳ Fss ʳ 30 ʳ --ʳ 200ʳ KHzʳ 8
interface
Receiver Data Input Margin ʳ
Fclk = 85 MHz tRMG ʳ -0.4 --ʳ 0.4 ns ʳ 9
Fclk = 65 MHz ʳ -0.5 ʳ --ʳ 0.5 ʳ
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Note :
1. VDD = 12.0V, Fv = 60Hz, Fclk= Max freq., 25 к, Test Pattern : White Pattern
2. Measurement condition : Rising time = 400us
9''
*1'
μs
3. Test Condition:
(1) The measure point of VRP is in LCM side after connecting the System Board and LCM.
(2) Under Max. Input current spec. condition.
4. VICM = 1.25V
LVDS -
V IC M V TH
|V ID |
V TL
LVDS +
GND
|V ID |
0V
|V ID |
5. The measure points of VIH and VIL are in LCM side after connecting the System Board and LCM.
Note: x = 0, 1, 2, 3, 4
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
7. LVDS Receiver Clock SSCG (Spread spectrum clock generator) is defined as below figures
)66
)FONB
)FONBVV
VVPD[
PD[
)FON
)FONB
)FONBVV
VVPLQ
PLQ
W5,3
W5,3
W5,3
W5,3
W5,3
W5,3
W5,3
/9'65[
5[ 5[ 5[ 5[ 5[ 5[ 5[ 5[ 5[ 5[ 5[ 5[
,QSXW'DWD
/9'65[
,QSXW&ORFN 9GLII
9
)FON 7
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
ÎNS
LVDS Option = High/OpenÎ
& OR FN
& + [B 5 5 * 5 5 5 5 5 5 *
& + [B
& + [B * * % % * * * * * %
& + [B
& + [B
& + [B % % '( 1$ 1$ % % % % '(
& + [B
& + [B 5 5 1$ % % * * 5 5 1$
Note: x = 1, 2, 3, 4…
ÎJEIDA
LVDS Option = LowÎ
3 UH YLR X V & \F OH & X UUHQ W& \FOH 1 H [ W& \FOH
& OR FN
&+ [B 5 5 * 5 5 5 5 5 5 *
&+ [B
&+ [B * * % % * * * * * %
&+ [B
&+ [B
% % '( 1$ 1$ % % % % '(
&+ [B
&+ [B
&+ [B 5 5 1$ % % * * 5 5 1$
Note: x = 1, 2, 3, 4…
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Notes:
(1) Display position is specific by the rise of DE signal only.
st st
Horizontal display position is specified by the rising edge of 1 DCLK after the rise of 1 DE, is displayed on the
left edge of the screen.
(2) Vertical display position is specified by the rise of DE after a “Low” level period equivalent to eight times of
st st
horizontal period. The 1 data corresponding to one horizontal line after the rise of 1 DE is displayed at the top
line of screen.
(3) If a period of DE “High” is less than 1366 DCLK or less than 768 lines, the rest of the screen displays black.
(4) The display position does not fit to the screen if a period of DE “High” and the effective data period do not
synchronize with each other.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
&+
'(
&/.
'(
'DWD
5*%
3L[HO
0
/LQH
3L[HO
0
1
3L[HO
0
7FON
3L[HO
0
,QYDOLG'DWD
7EONY
,QYDOLG'DWD
/LQH
3L[HO
7K
3L[HO
7Y
/LQH
3L[HO
3L[HO
/LQH
7GLVSK
7K
3L[HO
7GLVSY
3L[HO
/LQH
3L[HO
0
3L[HO
0
3L[HO
0
/LQH
1
7EONK
,QYDOLG'DWD
,QYDOLG'DWD
1 / LQ H
0SL[HO
3L[HO
3L[HO
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3RZ HU6XSSO\)RU/&'
9' '
' 9
* 1'
W W W W W
W W
%DFNOLJKWRQ RII
FRQWUROVLJQDO
9%/2 1 *1'
&0 2 6,QWHUIDFH6LJQDO W W
/9' 6 B 6( /
* 1'
Values
Parameter Unit
Min. Type. Max.
t1 0.4ʳ ---ʳ 30ʳ ms
t2 0.1ʳ ---ʳ 50ʳ ms
t3 450ʳ ---ʳ ---ʳ ms
*1
t4 0 ʳ ---ʳ ---ʳ ms
t5 0ʳ ---ʳ ---ʳ ms
*2
t6 ---ʳ ---ʳ --- ʳ ms
t7 500ʳ ---ʳ ---ʳ ms
*3
t8ʳ 10 ʳ ---ʳ 50ʳ msʳ
t9ʳ 0ʳ ---ʳ ---ʳ msʳ
Note:
(1) t4=0 : concern for residual pattern before BLU turn off.
(2) t6 : voltage of VDD must decay smoothly after power-off. (customer system decide this value)
(3) When CMOS Interface signal is N.C. (no connection), opened in Transmitted end, t8 timing spec can be
negligible.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
4. Optical Specification
Optical characteristics are determined after the open cell unit and light source has been ‘ON’ and stable for
approximately 45 minutes in a dark environment at 25°C. The values specified are at an approximate distance
50cm from the LCD surface at a viewing angle of ij and ș equal to 0°.
Fig.1 presents additional information concerning the measurement equipment and method.
SR3 or equivalent
Values
Parameter Symbol Condition Unit Notes
Min. Typ. Max
Contrast Ratio CR 2400 3000 -- 1,2
White Variation įWHITE(9P) -- -- 1.33 1,3
With AUO Module
Response Time (G to G) Tr -- 6.5 -- ms 4
Center Transmittance T% 6.8 % 1,7
Color Chromaticity 5
Red RX 0.656
RY 0.325
Green GX 0.273
With CS-1000T
GY 0.591
Standard light source “C” Typ.-0.03 Typ.+0.03
Blue BX 0.141
BY 0.094
White WX 0.298
WY 0.338
Viewing Angle 1,6
x axis, right(ij=0°) șr -- 89 -- degree
x axis, left(ij=180°) șl With AUO Module -- 89 -- degree
y axis, up(ij=90°) șu -- 89 -- degree
y axis, down (ij=270°) șd -- 89 -- degree
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
H/2 1 2 3
4 5 6 H
7 8
H/6
V/6 V/2
4. Response time Tr is the average time required for display transition by switching the input signal for five
luminance ratio (0%,25%,50%,75%,100% brightness matrix) and is based on Fv=60Hz to optimize.
Measured Target
Response Time 0% 25% 50% 75% 100%
0% 0% to 25% 0% to 50% 0% to 75% 0% to 100%
25% 25% to 0% 25% to 50% 25% to 75% 25% to 100%
Start 50% 50% to 0% 50% to 25% 50% to 75% 50% to 100%
75% 75% to 0% 75% to 25% 75% to 50% 75% to 100%
100% 100% to 0% 100% to 25% 100% to 50% 100% to 75%
ӫ
T is determined by 10% to 90% brightness difference of rising or falling period (As illustration).
The response time is defined as the following figure and shall be measured by switching the input signal for
“any level of gray(bright) “ and “any level of gray(dark)”.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
5. Light source here is the standard light source “C” which is defined by CIE and driving voltages are based on
suitable gamma voltages. The calculating method is as following ř
A. Measure the “Module” and “BLU” optical spectrums (W, R, G, B).
B. Calculate cell spectrum from “Module” and “BLU” spectrums.
C. Calculate color chromaticity by using cell spectrum and the spectrum of standard light source “C”.
6. Viewing angle is the angle at which the contrast ratio is greater than 10. The angles are determined for the
horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the LCD surface. For
more information see FIG4.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
5. Mechanical Characteristics
Item Typ Unit Note
Weight 880 g
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
6. Packing
6-1 Definition of Labels
Open cell shipping label (35*7mm)
1. S/N number
2. AUO internal use
3. Manufactured date
4. Model name
Carton Label:
7;91$
;;;;;;;;;;
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
EPE Spacer
Open Cell
Hybrid Box
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
7. PRECAUTIONS
Please pay attention to the followings when you use this TFT LCD Open Cell unit.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
7-5 STORAGE
When storing open cell units as spares for a long time, the following precautions are necessary.
(1) Store them in a dark place. Do not expose the open cell unit to sunlight or fluorescent light. Keep the
temperature between 5 к and 35к at normal humidity.
(2) The polarizer surface should not come in contact with any other object. It is recommended that they be
stored in the container in which they were shipped.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com