Professional Documents
Culture Documents
SG/PG Series: Industrial Spark-Ignited Generator Set
SG/PG Series: Industrial Spark-Ignited Generator Set
60 HZ
175 kW Industrial Spark-Ignited Generator Set
Generac International Products
14.2L
Power Ratings
Powering Ahead
For over 50 years, Generac has provided innovative design and superior manufacturing.
Generac ensures superior quality by designing and manufacturing most of its generator components, including
alternators, enclosures and base tanks, control systems and communications software.
Generac’s gensets utilize a wide variety of options, configurations and arrangements, allowing us to meet the
standby power needs of practically every application.
Generac searched globally to ensure the most reliable engines power our generators. We choose only engines that
have already been proven in heavy-duty industrial applications under adverse conditions.
Generac is committed to ensuring our customers’ service support continues after their generator purchase.
175 kW/158 kW
60 HZ
Standard Features
ENGINE SYSTEM ALTERNATOR SYSTEM ENCLOSURE
CONTROL SYSTEM
E-Stop (Red Mushroom-Type) Battery Voltage
NFPA110 Level I and II (Programmable) Frequency
Customizable Alarms, Warnings, and Events
Alarms and Warnings
Modbus® protocol Oil Pressure
Predictive Maintenance Algorithm Coolant Temperature
Sealed Boards Coolant Level
Password Parameter Adjustment Protection Low Fuel Pressure Alarm
Single Point Ground Engine Overspeed
Digital H Control Panel- Dual 4x20 Display 16 Channel Remote Trending Battery Voltage
0.2msec High Speed Remote Trending Alarms & Warnings Time and Date Stamped
Program Functions
Alarm Information Automatically Annunciated Snap Shots of Key Operation Parameters
Programmable Crank Limiter
on the Display
During Alarms & Warnings
7-Day Programmable Exerciser
Full System Status Display Alarms and Warnings Spelled Out (No Alarm
Special Applications Programmable Logic
Power Output (kW) Codes)
Controller
Power Factor
RS-232/485 Communications
kW Hours, Total & Last Run
3 Phase Sensing Digital Voltage Regulator
Real/Reactive/Apparent Power
2-Wire Start Capability
All Phase AC Voltage
Date/Time Fault History (Event Log)
All Phase Currents
Isochronous Governor Control
Oil Pressure
Waterproof/Sealed Connectors
Coolant Temperature
Audible Alarms and Shutdowns
Coolant Level
Not in Auto (Flashing Light)
Engine Speed
Auto/Off/Manual Switch
175 kW/158 kW
60 HZ
Configurable Options
ENGINE SYSTEM CIRCUIT BREAKER OPTIONS CONTROL SYSTEM
Engineered Options
ENGINE SYSTEM GENERATOR SET CONTROL SYSTEM
Coolant heater ball valves Special Testing Spare inputs (x4) / outputs (x4)
Fluid containment pan Battery Box Battery Disconnect Switch
Rating Definitions
Standby – See Bulletin 0187500SSB
Prime – See Bulletin 0187510SSB
*Consult factory for availability
175 kW/158 kW application and engineering data
60 HZ
ENGINE SPECIFICATIONS
Lubrication System
Oil Pump Type Gear
Oil Filter Type Full-flow spin-on cartridge
Crankcase Capacity - L (qts) 34.3 (36.2)
ALTERNATOR SPECIFICATIONS
60 HZ
POWER RATINGS – NATURAL GAS
Standby Prime
Single-Phase 120/240 VAC @1.0pf 175 kW 729 Amps 158 kW 658 Amps
Three-Phase 120/208 VAC @0.8pf 175 kW 607 Amps 158 kW 548 Amps
Three-Phase 120/240 VAC @0.8pf 175 kW 526 Amps 158 kW 475 Amps
Three-Phase 277/480 VAC @0.8pf 175 kW 263 Amps 158 kW 238 Amps
Three-Phase 346/600 VAC @0.8pf 175 kW 210 Amps 158 kW 190 Amps
* Fuel supply installation must accommodate fuel consumption rates at 100% load.
COOLING
Standby Prime
Air Flow (inlet air combustion and radiator) ft3/min (m3/min) 9389 (265.9) 9389 (265.9)
System Coolant Capacity Gal (Liters) 10.5 (39.7) 10.5 (39.7)
Heat Rejection to Coolant BTU/hr 597,740 537,966
Maximum Additional Radiator Backpressure in H2O 0.5 0.5
Standby Prime
Flow at Rated Power cfm (m3/min) 389 (11.0) 350 (9.9)
ENGINE EXHAUST
Standby Prime Standby Prime
Rated Engine Speed rpm 1800 1800 Exhaust Flow (Rated Output) cfm (m3/min) 1349 (38.2) 1214 (34.4)
Maximum Recommended Back Pressure
Horsepower at Rated kW hp 267 240 inHg 0.75 0.75
(Post Silencer)
Piston Speed ft/min (m/min) 1773 (540) 1773 (540) Exhaust Temp (Rated Output) °F (°C) 1378 (748) 1240 (673)
BMEP psi 136 122 Exhaust Outlet Size (Open Set) in 3.5" I.D. Flex (No Silencer)
Deration – Operational characteristics consider maximum ambient conditions. Derate factors may apply under atypical site conditions. Please consult a Generac Power Systems Industrial Dealer
for additional details. All performance ratings in accordance with ISO3046, BS5514, ISO8528 and DIN6271 standards. All power ratings are +/- 5%.
175 kW/158 kW dimensions and weights
60 HZ
STANDARD ENCLOSURE
L x W x H (in (mm) 154.4 (3909) x 54 (1371) x 69.8 (1772)
Steel: 6422 (2913)
Weight lbs (kg)
Aluminum: 5956 (2702)
Specification characteristics may change without notice. Please consult a Generac Power Systems Industrial Dealer for detailed installation drawings.
Generac Power Systems, Inc. • S45 W29290 HWY. 59, Waukesha, WI 53189 • generac.com
©2016 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Part No. 0L0026A-B 9/7/16