Professional Documents
Culture Documents
Supported SFPs R6K
Supported SFPs R6K
DESCRIPTION
Contents
1 Transceivers 1
1 Transceivers
1000Ba I RDH 102 47/2 MMF/S 1310 10 Max: 1.0 -8.5/-3 125–2 -19.7
se-LX MF 488.3
Mbps
(Runni
ng at 1
Gb/s)
• Tx: • Max: • BOL: Receive
1000Ba 1310 1.0 -7.5/-3 (
seBX10 I RDH 102 48/1 SMF 10 1 Gb/s
4)
Sensitivity in
-U • Rx: • Typical: • -8.0/-3 OMA (Max):
1490 0.8 -18.7
• Average
Receive
Sensitivity
(BER<10
–12 ): -22
1000Ba I RDH 102 44/41 SMF 1550 80 Max: 1.0 0/5 1 Gb/s
se-ZX • Average
Receive
Sensitivity
(BER<1
0–12 )
(BOL): -23
1000Ba I RDH901 002/1 N/A N/A 0.1 Max: 1.2 N/A 1 Gb/s N/A
se-T
BiDi • Tx:
1490 0.125
MR-LR2 C
(5)
RDH 102 56/5 SMF 80 ≤ 1.0 -2 to +3 –2.7 ≤ -29
1490TX/ • Rx: Gb/s
1570RX 1570
BiDi • Tx:
1570 0.125
MR-LR2 C RDH 102 56/6 SMF 80 ≤ 1.0 -2 to +3 –2.7 ≤ -29
1570TX/ • Rx: Gb/s
1490RX 1490
(1) I represents industry level temperature, which ranges from -40C to 85C.
(2) Beginning of Life (BOL)
(3) End of Life (EOL)
(4) 1 Gb/s is the data rate, the physical rate is 1.25 Gb/s.
(5) C represent commercial level temperature, which ranges from -5C to 70C
Note: Transceivers with EPNs of RDH 102 48/X are bidirectional transceivers.
• BOL:
(4)
-24
(5
• Min: • )EOL:-23
(3)
1525
DWDM I/E RDH 901 032/1 SMF 80 Max: 2.0 -1/+3 10
• Max: Sensitivity
1568 (BER of
1E-6) from
10.71 to
11.32
Gbit/s:
• BOL:
-25.5
• EOL:-24.
5
When Tx
and Rx
CDRs are
ON:
• Typical:
1.9
• Max: 2
When Tx
CDR is
OFF while
Rx CDR is • 0 km: ≤
10GBas 1530–15 ON: 8.5–11. -24
I RDH 901 030/1 SMF 65 80 0–4 3168
e-ZR • 80 km: ≤
• Typical: -22
1.8
• Max: 1.9
When Tx
and Rx
CDRs are
OFF:
• Typical:
1.7
• Max: 1.8
(1) 10 Gb/s is the data rate, the physical rate is 10.3125 Gb/s.
(2) I represents industry level temperature, which ranges from -40C to 85C. E represents extended level temperature,
which ranges from -5C to 85C. Both of these 2 types can be inserted into Router 6672. Contact Ericsson local
support engineers to confirm appropriate transceivers based on the field condition.
(3) I represents industry level temperature, which ranges from -40C to 85C. E represents extended level temperature,
which ranges from 0C to 85C. Both of these 2 types can be inserted into Router 6672. Contact Ericsson local support
engineers to confirm appropriate transceivers based on the field condition.
(4) Beiginning of Life (BOL)
(5) End of Life (EOL)
Note: Transceivers with EPNs of RDH 102 70/X are bidirectional transceivers.
• BOL:
1.5/4.0 1.2288 For details,
DWDM I RDH 102 406/60 SMF 1529.55 40 Max: 1.5 –11.31 see Table
SFP+ • EOL: 8 4.
1.0/4.0
• BOL:
1.5/4.0 1.2288 For details,
DWDM I RDH 102 406/59 SMF 1530.33 40 Max: 1.5 –11.31 see Table
SFP+ • EOL: 8 4.
1.0/4.0
• BOL:
1.5/4.0 1.2288 For details,
DWDM I RDH 102 406/58 SMF 1531.12 40 Max: 1.5 –11.31 see Table
SFP+ • EOL: 8 4.
1.0/4.0
• BOL:
1.5/4.0 1.2288 For details,
DWDM I RDH 102 406/57 SMF 1531.9 40 Max: 1.5 –11.31 see Table
SFP+ • EOL: 8 4.
1.0/4.0
• BOL:
1.5/4.0 1.2288 For details,
DWDM I RDH 102 406/56 SMF 1532.68 40 Max: 1.5 –11.31 see Table
SFP+ • EOL: 8 4.
1.0/4.0
• BOL:
1.5/4.0 1.2288 For details,
DWDM I RDH 102 406/55 SMF 1533.47 40 Max: 1.5 –11.31 see Table
SFP+ • EOL: 8 4.
1.0/4.0
• BOL:
1.5/4.0 1.2288 For details,
DWDM 1534.25 40 –11.31
SFP+ I RDH 102 406/54 SMF Max: 1.5 see Table
• EOL: 8 4.
1.0/4.0
• BOL:
1.5/4.0 1.2288 For details,
DWDM 1535.04 40 –11.31
SFP+ I RDH 102 406/53 SMF Max: 1.5 see Table
• EOL: 8 4.
1.0/4.0
• BOL:
1.5/4.0 1.2288 For details,
DWDM I RDH 102 406/52 SMF 1535.82 40 Max: 1.5 –11.31 see Table
SFP+ • EOL: 8 4.
1.0/4.0
• BOL:
1.5/4.0 1.2288 For details,
DWDM I RDH 102 406/51 SMF 1536.61 40 Max: 1.5 –11.31 see Table
SFP+ • EOL: 8 4.
1.0/4.0
• BOL:
1.5/4.0 1.2288 For details,
DWDM I RDH 102 406/39 SMF 1546.12 40 Max: 1.5 –11.31 see Table
SFP+ • EOL: 8 4.
1.0/4.0
• BOL:
1.5/4.0 1.2288 For details,
DWDM I RDH 102 406/38 SMF 1546.92 40 Max: 1.5 –11.31 see Table
SFP+ • EOL: 8 4.
1.0/4.0
• BOL:
1.5/4.0 1.2288 For details,
DWDM I RDH 102 406/37 SMF 1547.72 40 Max: 1.5 –11.31 see Table
SFP+ • EOL: 8 4.
1.0/4.0
• BOL:
1.5/4.0 1.2288 For details,
DWDM I RDH 102 406/36 SMF 1548.51 40 Max: 1.5 –11.31 see Table
SFP+ • EOL: 8 4.
1.0/4.0
• BOL:
1.5/4.0 1.2288 For details,
DWDM I RDH 102 406/35 SMF 1549.32 40 Max: 1.5 –11.31 see Table
SFP+ • EOL: 8 4.
1.0/4.0
• BOL:
1.5/4.0 1.2288 For details,
DWDM I RDH 102 406/34 SMF 1550.12 40 Max: 1.5 –11.31 see Table
SFP+ • EOL: 8 4.
1.0/4.0
• BOL:
1.5/4.0 1.2288 For details,
DWDM I RDH 102 406/33 SMF 1550.92 40 Max: 1.5 –11.31 see Table
SFP+ • EOL: 8 4.
1.0/4.0
• BOL:
1.5/4.0 1.2288 For details,
DWDM 1551.72 40 –11.31
SFP+ I RDH 102 406/32 SMF Max: 1.5 see Table
• EOL: 8 4.
1.0/4.0
• BOL:
1.5/4.0 1.2288 For details,
DWDM I RDH 102 406/31 SMF 1552.52 40 Max: 1.5 –11.31 see Table
SFP+ • EOL: 8 4.
1.0/4.0
• BOL:
1.5/4.0 1.2288 For details,
DWDM I RDH 102 406/30 SMF 1553.33 40 Max: 1.5 –11.31 see Table
SFP+ • EOL: 8 4.
1.0/4.0
• BOL:
1.5/4.0 1.2288 For details,
DWDM I RDH 102 406/29 SMF 1554.13 40 Max: 1.5 –11.31 see Table
SFP+ • EOL: 8 4.
1.0/4.0
• BOL:
1.5/4.0 1.2288 For details,
DWDM I RDH 102 406/17 SMF 1563.86 40 Max: 1.5 –11.31 see Table
SFP+ • EOL: 8 4.
1.0/4.0
• BOL:
1.5/4.0 1.2288 For details,
DWDM I RDH 102 406/16 SMF 1564.68 40 Max: 1.5 –11.31 see Table
SFP+ • EOL: 8 4.
1.0/4.0
• BOL:
1.5/4.0 1.2288 For details,
DWDM I RDH 102 406/15 SMF 1565.49 40 Max: 1.5 –11.31 see Table
SFP+ • EOL: 8 4.
1.0/4.0
• BOL:
1.5/4.0 1.2288 For details,
DWDM I RDH 102 406/14 SMF 1566.31 40 Max: 1.5 –11.31 see Table
SFP+ • EOL: 8 4.
1.0/4.0
(1) I represents industry level temperature, which ranges from -40C to 85C.
(2) Beginning of Life (BOL)
(3) End of Life (EOL)