Professional Documents
Culture Documents
SKL-WP2
BENEFITS FEATURES
Dependable and convenient to use • Outstanding penetrating characteristics
• Easy to carry and use in the field with the • Easy water-wash removal
convenient aerosol cans which are carefully • Vivid high-contrast color
designed for consistent, even coverage and
• Superior flaw resolution
maximum test area coverage
• Excellent reliability
• Use in all conditions without the need for
darkness or UV lights • Wide range of applications
• Quickly and completely covers the entire • Excellent controlled washability over a wide
test surface due to high surface wetting temperature range and variable dwell times.
SKL-WP2
APPLICATIONS PRODUCT PROPERTIES
Defect location: open to surface Form and colour Red liquid
Ideal for: AMS 2644 class Type 2, Method A/C
• A production environment where many Flash point > 93oC (bulk product)
parts are inspected daily.
Density 0.88 g/cm3
• Castings
• Forgings Viscosity 8.0 mm2/s
• Welds Sulphur content < 300 ppm
• Pressure vessels Chloride content < 300 ppm
• Tubular goods Corrosion Meets AMS 2644
• General metal work
Like all Magnaflux materials, our visible pene-
Ideal for:
trants are closely controlled to ensure batch-to-
• Cracks
batch consistency, optimum process control and
• Leaks
inspection reliability.
NOTE: we do not recommend SKL-WP2 for
inspecting plastic materials, as it may stain, USER RECOMMENDATIONS
soften or even dissolve the base material under Penetrant Testing,
test. NDT Method
Visible
Storage temperature 10oC to 30oC
COMPOSITION
5°C to 55°C (bulk)
A blend of petroleum distillates, non-ionic surfac- Usage temperature
-5°C to 50°C (aerosol)
tants and an oil-soluble organic red dye.
20 - 30m2 per litre
Coverage
10 - 15m2 per aerosol
Cleaner/remover SKC-S
Solvent-based
SKD-S2
developer
Water-based
ZP-5B
developer
Reference test block
Accessories
(part no. 070C001)
SKL-WP2
INSTRUCTIONS FOR USE
Ensure test part is clean and dry, and free from Pre-clean component with cleaner SKC-S.
oil, grease and other contaminants.
Apply penetrant by immersion dip, brush, flow
on, conventional or electrostatic spray. Cover the Apply penetrant SKL-WP2 to the clean
test area completely. component and allow contact time.
Allow penetration time. Minimum penetration
time is 2 to 5 minutes, with 10 minutes being
adequate for most situations. Lower tempera- Use SKC-S or spray the component with
tures thicken the penetrant and require longer water to remove excess penetrant.
penetration times.
Spray the component with clean water at 10°C to
40°C, or wipe with a lint-free cloth dampened with Dry component, apply developer
our SKC-S cleaner. Once clean, the component (SKD-S2 or ZP-5B) and inspect.
should be dried before a developer is applied.
Apply a thin layer of developer* to the surface and
allow a minimum of 10 minutes development time PACKAGING AND PART NUMBERS
before inspecting the component under white
light. Indications will appear dark red against the
white developer background.
* A developer is used to maximise sensitivity and
provide a white contrasting background. Two 008A163 055C071
types of developer can be used: (x 10) (x 4)
055C072
Solvent-based: quick-drying materials which are
applied by spraying. The component under test
must be dry before developer is applied. HEALTH AND SAFETY
Review all relevant health and safety information
Water-based (aqueous): can be applied by
before using this product. For complete health
dipping or spraying. To maximise penetrant
and safety information, refer to the Safety Data
sensitivity, parts should only be exposed to aque-
Sheets, which are available at www.magnaflux.eu.
ous developers for short periods of time. The
component must be dried before inspection.
Developer residue can be removed either by
wiping with a cloth or by a water and detergent
wash. Penetrant residues can be removed by
vapour degreasing or solvent soak.