Professional Documents
Culture Documents
Contents:
Company Profile
Products Profile
Condensing Turbines
Services
3|Page
Company Profile
Anhui Xinning Energy Technology Co., Ltd. located in Ningguo National Economic and
Technological Development Zone. It is an "equipment supplier and power operator" that
provides the overall solution of industrial waste heat and residual pressure power generation
and new energy power generation. The company's main products are special turbines for energy
recovery and new energy thermal power generation, with strong R&D strength. At present, the
company has independent intellectual property rights such as "radial steam turbine series",
"special working medium steam turbine", “Organic Rankine Cycle (ORC) Low Temperature Power
Plant". Among them, "Radial Steam Turbine Series" technology fills the domestic blank and
reaches the international advanced level.
Radial steam turbine working fluids include steam, Freon, carbon dioxide, compressed air,
nitrogen, methane, and pentane and so on. They are mainly used in iron and steel, metallurgy,
petrochemical, chemical industry (coking, coal chemical, phosphorus chemical, alkali chemical,
lithium salt, rubber, calcium carbide, ferroalloy, carbon), thermoelectricity, papermaking, kiln,
furnace, etc. Waste heat and residual pressure recovery and high-speed dragging in printing and
dyeing, cement, ceramics, coal gangue, oil field waste heat liquid, medicine, tobacco, food and
many other industries can also be applied to distributed energy systems, geothermal, biomass
energy, solar thermal power generation.
The radial turbine manufactured by our company is a kind of mechanical equipment which uses
the temperature and pressure of steam (steam, compressed air, nitrogen, carbon dioxide, Freon
and other different gases) to export electric energy to the outside world. At present, there is no
mature application of radial industrial steam turbines in China, so they must be imported from
abroad. Dr. Song Guo Liang has been engaged in research and development of radial steam
turbines and related fields at Nanyang University of Technology in Singapore. He has adopted
impeller blade design completely different from conventional steam turbines, which has greatly
improved the efficiency of power generation. He can be used in steam power generation,
high-speed dragging, low-temperature waste heat recovery and other fields. The state plays an
active role in promoting energy conservation and emission reduction. Have completely
independent intellectual property rights. In 2017 Anhui Xinning Energy Company limited won the
first prize in Xuancheng Enterprise Innovation Competition. In the same year, it was supported
by Anhui Provincial Government's A-type venture capital (10 million yuan). In 2018 Anhui Xinning
Energy Company won the fourth position in national entrepreneurship and innovation contest in
Energy sector.
4|Page
Company Employees
There are more than 100 employees, including four with doctoral degrees (including senior titles)
and nine with master's degrees (including intermediate titles).
Chief engineer
Name: Dr. Song
Degree: Postdoctoral
Major in the study: Fluid Machinery
Job Title: Chief engineer
Graduated institutions: Nanyang Polytechnic University, Singapore
Main achievements
1. 2008 Won the Nanyang Polytechnic University Engineering Exhibition Nomination
Award.
2. 2008 awarded the outstanding Thesis Award of the Hong Kong Institution of Engineers.
3. 2013 won the third prize of the Science and Technology Progress award of China
Huadian Electric Power Research Institute.
4. 2017 awarded the first prize of new achievements in scientific and technological
technology in Anhui Province.
5. 2018 won the seventh National Innovation and Entrepreneurship Competition
Excellence Award.
6. Published more than 10 academic papers, with 4 job invention patents, and two
software copyrights.
5|Page
Products application
In recent years, with the development of chemical industry, oil refining, petrochemical industry,
metallurgy, light industry and textile industry, as well as energy saving, industrial steam turbines
will be more widely used. Medium and small back pressure industrial steam turbines are mainly
used to drive boiler feed pumps, fans and ball mills in power plants. The steam intake of this kind
of steam turbine can be either new steam or steam extraction or back pressure extraction. The
exhaust steam of medium and small back pressure industrial steam turbine can be used for boiler
feed water heating. At the same time, many small and medium-sized thermal power plants or
thermal power plants in China have gradually adopted the energy-saving technology of
cogeneration of heat and electricity by circulating water heating for their own survival needs or
to improve the economic benefits of enterprises. The circulating water pump is driven by a small
back pressure industrial steam turbine, and the steam after work is heated to circulate water, so
the heating system is as follows. It can save the power consumption of the pump motor and
increase the temperature of the circulating water, to kill two birds with one stone.
1. Drag Recycling Product Application pump
2. Drag Boiler Feed Pump
3. Drag boiler lead Fan
4. Drag compressor
5. Exhaust waste heat power generation
6. Steel waste heat power generation
7. Municipal Garbage Power generation
8. Biomass Power generation
6|Page
Product Factory Rated Speed Inlet Steam Inlet Steam Exhaust Steam
Model Code Power (r/min) Pressure Temperature Steam Consumpti
(KW) (MPa) (℃) pressure on
(MPa) (Kg/Kwh)
Product model Factory Rated Rated Inlet steam Inlet steam Exhaust Steam
number code power speed pressure temperatur Steam consumption
(Kw) (MPa) e (℃) pressure (kg/kwh)
(rpm) (MPa)
Note: Inlet and exhaust pressure for absolute pressure, steam turbine body weight2.9T.
source drag rotating machinery to do the energy cascade utilization in order to achieve energy
saving and consumption reduction purposes.
Product Factory Rated Rated Inlet Inlet steam Exhaust steam Steam
Model Code Power Speed steam temperature Pressure (MPa) Consumption
(KW) (rpm) pressure (℃)
(MPa) (Kg/Kwh)
food, and chemical industry, paper making, textile, printing, and dyeing enterprises. The turbine
rotor adopts a complex speed stage, two pressure stages, and nozzle pitch diameter of 1050 mm,
the turbine adopts a full hydraulic regulation system, multi-valve regulation, forced lubrication,
spindle speed of 3000 revolutions, drag generator power generation.
Note: The intake and exhaust steam pressure are absolute pressure.
62 | P a g e
series One single (double) column complex speed stage +6-8 Stage
pressure stage
Regulating system type Full Hydraulic Control System or Hydraulic Control System
Note: The intake and exhaust steam pressure are absolute pressure.
77 | P a g e
Series One single (double) column complex speed stage +6-8 Stage
pressure stage
Series One single (double) column complex speed stage +6-8 Stage
pressure stage
86 | P a g e
Note: The intake and exhaust steam pressure are absolute pressure.
Product Factory Rated Rated Inlet Inlet Exhaust Steam Extraction Intak
Model Code Power Speed steam steam steam Extractio Volume Steam
(KW) (rpm) Pressure Tempera pressure n (T/h) Volume
(MP)) ture (℃) (MPa) Pressure (T/h)
(MPa)
Contact information
Sales Engineer: Martin
Tel: 0086-563-4183069
Fax: 0086-563-4180028
Mobile: +86-181-56363122
WeChat: 18156363122
WhatsApp: +8618156363122
Website: www.heat-treat-furnace.com /energy company website
under maintenance soon will send you URL.
Email: sales@ngxn.com
Add: Anhui Xinning Equipment Co. LTD. & Anhui Xinning
Energy Co. LTD.
Address 1: East Avenue, Heli Industrial Park, Ningguo Economic
Development zone, Anhui, China
Address 2: No.1 South Chuangxin Rd, Ningguo Economic
Development Zone, Anhui, China
Post Code:242300