Professional Documents
Culture Documents
1
Complete
Mark 1.00 out of 1.00
Flag question
Question text
The figure represents the concurrent force system acting at a joint of a bridge truss.
Determine the value of P and F to maintain equilibrium of the forces.
Select one:
a. P = 265.45 lb, F = 472.44 lb
b. P = 65.45 lb, F = 12.44 lb
c. none of the choices
d. P = 165.45 lb, F = 412.44 lb
Question 2
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Select one:
a. magnitude, inclination, position
b. none of the choices
c. magnitude, displacement, position
d. speed, inclination, position
Question 3
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Forces P and F acting along the bars shown in the figure maintain equilibrium of pin A.
Determine the values of P.
NOTE : see fig-14 from the LIST OF FIGURE in Week1
Select one:
a. P = 14.76 kN
b. P = -14.76 kN
c. none of the choices
d. P = 4.76 kN
Question 4
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Two weightless bars pinned together as shown in the fig-15 from the LIST OF FIGURE in
Week-1 support a load of 35 kN. Determine the forces P and F acting respectively along
bars AB and AC that maintain equilibrium of pin A.
Select one:
a. none of the choices
b. P = 900.14 kN, F = 4.03 kN
c. P =9.14 kN, F = 6.03 kN
d. P = 90.14 kN, F = 64.03 kN
Question 5
Complete
Mark 1.00 out of 1.00
Flag question
Question text
If there is a great number of forces, the ___________ to this system would potentially be
simpler if the forces that are applied to the system are easy to break into components.
Select one:
a. none of the choices
b. logical solution
c. algebraic solution
d. graphical solution
Question 6
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Determine the magnitude of P and F necessary to keep the concurrent force system in the
figure in equilibrium.
NOTE : see fig-8 from the LIST OF FIGURE in week-1
Select one:
a. P = -13.325 N, F = -86.37 N
b. P = -133.25 N, F = 86.37 N
c. none of the choices
d. P = 133.25 N, F = -86.37 N
Question 7
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Select one:
a. 8 m
b. 7 m
c. none of the choices
d. 6 m
Question 8
Complete
Mark 1.00 out of 1.00
Flag question
Question text
One ____________ would be to resolve a pair of forces using the parallelogram or triangle
method into a resultant.
Select one:
a. none of the choices
b. algebraic method
c. graphical method
d. logical method
Question 9
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Since all of these forces are not entirely parallel, the position of the resultant can be
established using the ________ or ________ methods.
Select one:
a. graphical, logical
b. graphical, algebraic
c. none of the choices
d. analytical, graphical
Question 10
Complete
Mark 1.00 out of 1.00
Flag question
Question text
A cylinder weighing 400 lb. is held against a smooth incline by means of the weightless rod
AB in the figure. Determine the forces P and N exerted on the cylinder by the rod and the
incline.
NOTE : see fig-6 from the LIST OF FIGURE in Week-1
Select one:
a. P = 0.9038 N , N = 418.60 lb
b. P = 9038 N , N = 4186.0 lb
c. P = 90.38 N , N = 41.860 lb
d. none of the choices
Question 11
Complete
Mark 1.00 out of 1.00
Flag question
Question text
The 300-lb force and the 400-lb force shown in the figure are to be held in equilibrium by a
third force F acting at an unknown angle θ with the horizontal. Determine the values of F.
NOTE : see fig-10 from the LIST OF FIGURE in Week-1
Select one:
a. F = 20.31 lb
b. F = 205.31 lb
c. 5.31 lb
d. none of the choices
Question 12
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Select one:
a. none of the choices
b. 8 ft
c. 7 ft
d. 6 ft
Question 13
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Determine the values of α and θ so that the forces shown in the figure will be in equilibrium.
Select one:
a. α =46.57 degrees and θ = 28.96 degrees
b. none of the choices
c. α =4.57 degrees and θ = 58.96 degrees
d. α =6.57 degrees and θ = 2.96 degrees
Question 14
Complete
Mark 1.00 out of 1.00
Flag question
Question text
The cable and boom shown in the figure support a load of 600 lb. Determine the tensile
force T in the cable and the compressive for C in the boom.
Select one:
a. T = 439.24 lb , C = 537.94 lb
b. none of the choices
c. T = 43.24 lb , C = 53.94 lb
d. T = 49.24 lb , C = 57.94 lb
Question 15
Complete
Mark 1.00 out of 1.00
Flag question
Question text
The cylinders in the figure have the indicated weights and dimensions. Assuming smooth
contact surfaces, determine the reactions at A, B, C, and D on the cylinders.
Select one:
a. A = 47.39 kN, B = 60 kN, C = 40.85 kN, D = 47.39 kN
b. A = 347.39 kN, B = 600 kN, C = 400.85 kN, D = 347.39 kN
c. A = 37.39 kN, B = 6000 kN, C = 4000.85 kN, D = 37.39 kN
d. none of the choices
Question 16
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Determine the resultant of the force system shown in the figure and its x and y intercepts.
NOTE: see fig-3 from the LIST OF FIGURE in WEEK-1
Select one:
a. 161.314 lb
b. 163.114 lb
c. 164.311 lb
d. none of the choices
Question 17
Complete
Mark 1.00 out of 1.00
Flag question
Question text
________________ is defined as the forces which lies in the line of activity but do not intersect
or forms a parallel at a common point.
Select one:
a. Parallel Forces
b. none of the choices
c. Forces
d. Non-Concurrent Forces
Question 18
Complete
Mark 1.00 out of 1.00
Flag question
Question text
A 300-lb box is held at rest on a smooth plane by a force P inclined at an angle θ with the
plane as shown in the figure. If θ = 45°, determine the value of P and the normal pressure N
exerted by the plane.
Select one:
a. P = 2121.3 lb , N = 40981 lb
b. P = 212.13 lb , N = 409.81 lb
c. none of the choices
d. P = 21213 lb , N = 40.981 lb
Question 19
Complete
Mark 1.00 out of 1.00
Flag question
Question text
The three forces in the figure create a vertical resultant acting through point A. If T is known
to be 361 lb., compute the values of F and P.
NOTE: see fig-4 from the LIST OF FIGURE in week-1
Select one:
a. none of the choices
b. F = 2532.9 lb , P = 50.706 lb
c. F = 253.29 lb , P = 507.06 lb
d. F = 25.329 lb , P = 507.06 lb
Question 20
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Cords are loop around a small spacer separating two cylinders each weighing 400 lb. and
pass, as shown in the fig-12 from the LIST OF FIGURE in Week-1 over a frictionless pulley to
weights of 200 lb. and 400 lb. Determine the angle θ.
Select one:
a. θ = 60 degrees
b. θ = 70 degrees
c. none of the choices
d. θ = 76 degrees