Professional Documents
Culture Documents
15FMCE211-Assessment2-Fall 2020
15FMCE211-Assessment2-Fall 2020
Total Mark 10
Assessor Feedback:
Assessor Name:
Date:
Assessor Signature:
Student Name:
Date:
Student Signature:
Page 1 of 5
Assessment Tool
Question I (4 Marks)
We have all watched the movie “Titanic” where Jack dies to save the love of his life, Rose, by placing
her on a door as he stays in the freezing water dying slowly. Most of the audience were wondering
why Jack didn’t go on the door too, although there was a plenty of space.
Using Buoyancy, explain why Jack didn’t have any chance to survive and they would have all
sunk. Note that they would survive only if the volume submerged is that of the door.
Given that:
Mass of Rose = 55 kg
Mass of Jack = 80 kg
Find:
We have to find out the reason that why Jack could not survive and all the people have sunk =?
Solution:
Now,
Buoyancy fore acting on door = Fb = Density of fluid * Volume displaced by fluid * gravity
Page 2 of 5
Assessment Tool
Fb = 2083.467 N
Now, to determine that both Jack and Rose could have gotten on floating door:
Fg = (mdoor + mRose + mJack) * g
Fg = (149.796 kg + 55 kg + 80 kg) * 9.81 m/s2
Fg(D+R+J) = 2793.467 N
Now, weight of Rose above the door is:
Fg = (mdoor + mRose) * g
Fg = (149.796 kg + 55 kg ) * 9.81 m/s2
Fg(D+R) = 2009.049 N
We can see from above calculations,
Fb < Fg(D+R+J)
Fb > Fg(D+R+)
It is concluded that Rose survived on door because their combined weight (Door + Rose) is less than
buoyancy force. But the weight of all three (Rose + Jack + Door) is more than buoyancy force. If both
Jack and Rose were on the door at the same time, the door would have sunk.
Page 3 of 5
Assessment Tool
Question II (6 Marks)
In the figure below, water (RD = 1) flows in a pipe of diameter of 100 mm at point 1 and 50 mm at
point 2. Points 1 and 2 are connected to a manometer of mercury (RD = 13.6).
- If losses are neglected, determine the values of the velocities v1 and v2 (4 points)
- Recalculate the velocities considering that the losses are 0.5 m (2 points)
Find:
Velocities at point 1 and 2 = v1 = v2 =?
Solution:
Now, applying equation of continuity
Q1 = Q2 = Q
A1 v1 = A2v2 = Q ∵Q = Av
(100)2 * v1 = (50)2 * v2
ΔP = P1 – P2 = (ρmercury - ρwater) * gh
ΔP = 9270.45 N/m2
Page 4 of 5
Assessment Tool
Bernoulli’s Equation:
+ + z1 = + + z2 + hL ∵ hL = losses
(a) Case 1, hL = 0, z1 = z2
= = =
0.945 = 0.764525
( )
= = = + 0.5
0.945 = 0.764525
0.445 = 0.764525
( )
Page 5 of 5