Professional Documents
Culture Documents
Corrosion inhibitor and hardness stabilizer for water treatment of cooling systems (can be
used with pH water from 8.2 to 9.0).
ENVIRONMENTAL EFFECT
Aktiphos® 4180 does not contain zinc.
The product is non-volatile and non-
combustible.
ЗАО "ŠOMIS"
Energetikų g. 6
LT-52461 Kaunas
Lietuva (Литва)
Teл. + 370 37 407048
info@somis.lt www.somis.lt
DOSING
The dosage depends on many factors The product should be introduced into the
(concentration factor, hardness, total system either before or before the highest
alkalinity, amount of chlorides, precision mixing.
temperature, curing index) and has to be
selected with the help of ŠOMIS ANALYSIS
specialists. The quantity of Aktiphos® 4180 can be
In recirculation cooling water, the controlled according to the concentration
concentration of Aktiphos® 4180 should be of PO43-. The amount of PO43- can only
kept in the range from 50 to 100 g/m3. be determined after the oxidation
Aktiphos® 4180 also can be used breakdown of the phosphonic acids which
concentrated. The product should be are present in the product.
dosed continuously and the amount of
product should be proportional to the АНАЛИТИЧЕКИЙ МЕТОД
amount of feed water. Dosing should be Analytical method: A4 – total amount of
done with special pumps. All equipment in phosphates.
contact with the product should be made 1 g/m3 Aktiphos® 4180 = 0,038 g/m3
of acid-resistant materials. Advantage PO43-
should be given to plastics (PE, PP, PVC). 1 g/m3 PO43- = 26 g/m3 Aktiphos® 4180.
ЗАО "ŠOMIS"
Energetikų g. 6
LT-52461 Kaunas
Lietuva (Литва)
Teл. + 370 37 407048
info@somis.lt www.somis.lt