Professional Documents
Culture Documents
PLO-2: Problem Analysis: An ability to identify, formulate, research literature, and analyze complex engineering problems
reaching substantiated conclusions using first principles of mathematics, natural sciences, and engineering sciences.
CLO-3: Analyze and solve the problems related to kinetics of rigid bodies using different principles and techniques for their
solution
Attribute 5: Familiarity: Can extend beyond previous experiences by applying principles-based approaches.
Problem Statement
The wheels of train are connected to each other as shown in figure. The force is transferred fom one wheel to other one
through pins. It is therefore very critical to analyse these wheels for the forces and accelerations. The following problem is
analogous to the above statement except the weight of train is not included.
Two uniform disks A and B, each of mass 2 kg, are connected by a 1.5-kg rod CD as shown. A counterclockwise couple M of
moment 2.5 N-m is applied to disk A. Knowing that the disks roll without sliding, Analyze the wheels on the bais of (a) the
acceleration of the center of each disk, (b) the force exerted on disk B by pin D.
Assessment Criteria
The assessment of the CEP will be according to the rubrics defined particularly for this CEP.
Note: Students whose report have similarity index ≥ 50% will be marked out of 25.
Page 1 of 2
Assessment Rubrics for CEP
Nil
Learning Insufficient Satisfactory Good Excellent Obtained
Attributes Report
Outcome marks
0 1-7 8-14 15-20 21-25
Complete steps
Complete but
CLO-2, PLO-2, Cognitive-4
Complete steps
Complete but
Incomplete but missing Complete in all
Force Analysis Nil missing some
Analysis proper aspects
steps
explanation
Page 2 of 2