Professional Documents
Culture Documents
com/production-and-operation-of-management/
Ans: float
2. It is the process of deveioping, analysis and maintaining a preliminary, approximate schedule of the overall operations of an
organization:-
Aggregate planning.
Short-cycle-repetitive jobs.
4. It is concerned with relative location of one department with another in order to facilitate material flow and processing of a product
in the most efficient manner through the shortest possible distance and time:-
Plant layout.
5. Where the main purpose is to lead quality projects and work full time until they are completed?
Black belts.
1 of 15 1/24/2021, 2:11 PM
Production and Operation of Management - Education Luck https://educationluck.com/production-and-operation-of-management/
M.
Process layout.
9. While lying close to mean of the process what indicates biases in measurements, recording done without actual measurements and
Hugging points.
10. A typical firm would master schedule the major subassemblies or modules that can be assembled to make the particular product
Assemble-to-order.
2 of 15 1/24/2021, 2:11 PM
Production and Operation of Management - Education Luck https://educationluck.com/production-and-operation-of-management/
allow design changes within limited loss, allows parts modification within limited loss.
14. All operations add value to the objects thereby enhancing their usefulness:-
false.
15. In an assemble-to-order firm, a final assembly schedule is developed later when the customer orders are received:-
True.
16. The observation in work sampling must be made at ……. intervals of time and should be spread over all hours of the study.
random
zero
18. In a combination mixed layout, the parts are assembling using ……. type of layout.
process
randomization
20. Master production schedule sets the……….. of each end item to be completed in each week of a short-range planning horizon.
3 of 15 1/24/2021, 2:11 PM
Production and Operation of Management - Education Luck https://educationluck.com/production-and-operation-of-management/
quantity
21. This presents the quantitative data on material flow by recording distance and frequency of movements between different pairs of
departments:-
Travel chart.
Quality control.
Job splitting.
24. It refers to the manufacturing process by which materials and other resources get converted into goods and services:-
Production method.
25. Which is the most commonly used method of selecting the representative time value?
Arithmetic mean.
Network.
27. The process by which goods and services are produced is called:-
4 of 15 1/24/2021, 2:11 PM
Production and Operation of Management - Education Luck https://educationluck.com/production-and-operation-of-management/
Production.
28. These are the scale plans on which the movements of an object are traced by means of a string:-
String diagrams.
29. It is a promise to deliver the product at a later date when it is more readily available:-
Backorder.
31. Work measurement studies must be preceded by method studies to simplify and standardize methods:-
True.
32. The ……. system is ill suited to cope with large variations in demand of the products.
pond draining
33. All machines tend to …….. in performance with use over the period.
deteriorate
34. A multiple activity chart is made to detect……. time enforced on men and machine.
idle
5 of 15 1/24/2021, 2:11 PM
Production and Operation of Management - Education Luck https://educationluck.com/production-and-operation-of-management/
transport facility.
productivity of labour.
safety factor.
fragile product.
39. In order to achieve cost economy with small lot sizes, set up time must be:-
Reduced.
41. What do you understand by the selection of the job for the method study on the basis of money saving potential of the job?
Technical consideration.
6 of 15 1/24/2021, 2:11 PM
Production and Operation of Management - Education Luck https://educationluck.com/production-and-operation-of-management/
42. What is the name of the document on which details of the process are recorded by the symbols and charting conventions?
Chart.
Scheduling.
Structure.
By dotted line.
46. TO arrive at realistic machine capacity, the theoretical capacity is multiplied by:-
Utilazation index.
47. JIT advocates the philosophy of elimination of waste from system which occurs in the following forms:-
Waste due to waiting (queues), waste due to transportation, waste due to over production.
48. Assignable variability can be traced to the specific causes (called assignable causes) whose removal brings about:-
7 of 15 1/24/2021, 2:11 PM
Production and Operation of Management - Education Luck https://educationluck.com/production-and-operation-of-management/
Facilities are grouped into cells, it is a type of mixed layout, uses concept of group technology.
50. The steeper the OC curve, the better is the discrimination between good and bad lots:-
True.
51. Rating is used as a leveling factor to convert the observed time of an element into normal time:-
True.
52. To shorten the time of the project, some of the activities on the critical path must be shortened:-
False.
52. Proper care and storage is not an assential part of a well planned lubrication system.
False.
53. ……….. is a technique through which it is possible to identify which of an available set of jobs to process next on an available
resource.
Dispatching
letter dee
8 of 15 1/24/2021, 2:11 PM
Production and Operation of Management - Education Luck https://educationluck.com/production-and-operation-of-management/
time
Demand
Eye = crack.
Tongue = sweet.
Ear = impact.
Nose = burnout.
57. It is a visual display of statistically significant changes that may occur in a process:-
Control chart.
Monetary inducements.
Dummy activity.
9 of 15 1/24/2021, 2:11 PM
Production and Operation of Management - Education Luck https://educationluck.com/production-and-operation-of-management/
X-R chart.
61. It concerns determination and acquisition of productive resource to ensure that their availability matches the demand:-
Capacity planning.
62. These are photographical methods and are used to trace especially those movements which are too fast for human eye to pursue:-
Cyclograph, chronocyclegraph.
63. Selection of the jobs to be studied for methods improvement by the method study practitioner is a managerial responsibility and it
65. Usually financial incentives are those where earnings are related to effort:-
True.
66. All the process selection decisions need not be taken while formulating the manufacturing strategy of the firm:-
False.
10 of 15 1/24/2021, 2:11 PM
Production and Operation of Management - Education Luck https://educationluck.com/production-and-operation-of-management/
True.
68. It is essential that all banks are equipped with ………. computer system.
synchronous
69. Work sampling gives ………. results since workmen are not under close observation.
unbiased
70. A multiple activity chart is made to detect …….. enforced on men and machine.
idle time
71. In jobbing production, the labour force is usually highly skilled and qualified who are expected to work from …………
minimum instructions
72. A change in ……… time of an activity or activities can cause a change in critical path.
estimation
. Effective objective = producting the right kind of goods and service that customers needs.
Efficiency objective = with minimum resource inputs, maximizing output of goods and service.
11 of 15 1/24/2021, 2:11 PM
Production and Operation of Management - Education Luck https://educationluck.com/production-and-operation-of-management/
73. It is the designated period during which the master scheduler is allowed to make changes, but computer software is not:-
Alteration.
75. The most commonly used technique of pre-determined motion and time study is:-
76. It is the system or a set of tools and techniques, by which products are made to comply with the specifications at minimum cost to the
firm:-
Quality control.
78. It includes activities like making of work orders, converting work orders into shop orders, preparing auxiliary orders:-
Order preparation.
79. Operational layouts, after goods have been manufactured, require to be collected back from the shops and filled so that they can be:-
12 of 15 1/24/2021, 2:11 PM
Production and Operation of Management - Education Luck https://educationluck.com/production-and-operation-of-management/
Repetition.
Quality of design.
82. It concerns fixation of method of manufacture such that to enable shops to produce goods of the right quality at the lowest cost:-
Process planning.
Sample population.
84. Which is a sampling inspection in which the decision to accept or reject the lot is based on inspection results of a single sample?
Quality control.
helps to exercise control by exception, enables plan to be revised in accordance with changes, identifies trouble spots often in advance
13 of 15 1/24/2021, 2:11 PM
Production and Operation of Management - Education Luck https://educationluck.com/production-and-operation-of-management/
14 of 15 1/24/2021, 2:11 PM
Production and Operation of Management - Education Luck https://educationluck.com/production-and-operation-of-management/
15 of 15 1/24/2021, 2:11 PM