Professional Documents
Culture Documents
Clean the faucet in case it presents. any dirt on the In case of any doubts, please, contact Alexandre Jorge
outside. (alexandre.jorge@farstad.com), before doing the
collection.
Open the water faucet and let it run heavily. It is necessary
because some fecal coliform might multiply into the retained
water while the distribution, or multiply within the joint fibres used This kit must only be used to collect samples, being
to stop the distribution.
Reduce the discharge rate on water faucet slowing down the forbidden to use any item for other purposes.
water flow into half session (operation) let it runs for 1 minute.
At first, use the 1L bottle to collect the sample.
Quickly open the sterilized sample bottle (100 ml) and collect the
Quantity of bottle:
sample in the shortest time as you can.
03 bottles 1L
During this process, it is very important not to touch the bottle
inside; also you have to avoid the bottle cap be in contact by any 03 bottles 100 ml
surface (operation time: 30 seconds).
By the time of collecting, fill ¾ of the sample bottle in order to
have the sample homogenized in the laboratory.
The same sampling collection must be carried out using one 1L.
bottle (physicochemical analysis) and one sterilized 100 ml.
NOTE:
bottle (bacteriological exams)
Clean the faucet in case it presents any dirt on the In case of any doubts, please, contact Alexandre Jorge
outside. (alexandre.jorge@farstad.com), before doing the
collecting.
Open the water faucet and let it run heavily. It is necessary
because some fecal coliform might multiply into the retained
water while the distribution, or multiply within the joint fibres used This kit is only to collect samples. Being forbidden to use
to stop the distribution.
Reduce the discharge rate on water faucet slowing down the any item for other purposes.
water flow into half session (operation) let it runs for 1 minute.
At first, use the 1L bottle to collect the sample.
Quickly open the sterilized sample bottle (100 ml) and collect the
Quantity of bottle:
sample in the shortest time as you can.
03 bottles 1L
During this process, it is very important not to touch the bottle
inside; also you have to avoid the bottle cap be in contact by any 03 bottles 100 ml
surface (operation time: 30 seconds).
By the time of collecting, fill ¾ of the sample bottle in order to
have the sample homogenized in the laboratory.
The same sampling collection must be carried out using one 1L.
bottle (physicochemical analysis) and one sterilized 100 ml.
NOTE:
bottle (bacteriological exams)
Clean the faucet in case it presents any dirt on the In case of any doubts, please, contact Alexandre Jorge
outside. (alexandre.jorge@farstad.com), before doing the
collecting.
Open the water faucet and let it run heavily. It is necessary
because some fecal coliform might multiply into the retained
water while the distribution, or multiply within the joint fibres used This kit is only to collect samples. Being forbidden to use
to stop the distribution.
Reduce the discharge rate on water faucet slowing down the any item for other purposes.
water flow into half session (operation) let it runs for 1 minute.
At first, use the 1L bottle to collect the sample.
Quickly open the sterilized sample bottle (100 mL) and collect
Quantity of bottle:
the sample in the shortest time as you can.
03 bottles 1L
During this process, it is very important not to touch the bottle
inside; also you have to avoid the bottle cap be in contact by any 03 bottles 100 ml
surface (operation time: 30 seconds).
By the time of collecting, fill ¾ of the sample bottle in order to
have the sample homogenized in the laboratory.
The same sampling collection must be carried out using one 1L.
bottle (physicochemical analysis) and one sterilized 100 ml.
NOTE:
bottle (bacteriological exams)
Clean the faucet in case it presents any dirt on the In case of any doubts, please, contact Alexandre Jorge
outside. (alexandre.jorge@farstad.com), before doing the
collecting.
Open the water faucet and let it run heavily. It is necessary
because some fecal coliform might multiply into the retained
water while the distribution, or multiply within the joint fibres used This kit is only to collect samples. Being forbidden to use
to stop the distribution.
Reduce the discharge rate on water faucet slowing down the any item for other purposes.
water flow into half session (operation) let it runs for 1 minute.
At first, use the 1L bottle to collect the sample.
Quickly open the sterilized sample bottle (100 ml) and collect the
Quantity of bottle:
sample in the shortest time as you can.
03 bottles 1L
During this process, it is very important not to touch the bottle
inside; also you have to avoid the bottle cap be in contact by any 03 bottles 100 ml
surface (operation time: 30 seconds).
By the time of collecting, fill ¾ of the sample bottle in order to
have the sample homogenized in the laboratory.
The same sampling collection must be carried out using one 1L.
bottle (physicochemical analysis) and one sterilized 100 ml.
NOTE:
bottle (bacteriological exams)
Clean the faucet in case it presents any dirt on the In case of any doubts, please, contact Alexandre Jorge
outside. (alexandre.jorge@farstad.com), before doing the
collecting.
Open the water faucet and let it run heavily. It is necessary
because some fecal coliform might multiply into the retained
water while the distribution, or multiply within the joint fibres used This kit is only to collect samples. Being forbidden to use
to stop the distribution.
Reduce the discharge rate on water faucet slowing down the any item for other purposes.
water flow into half session (operation) let it runs for 1 minute.
At first, use the 1L bottle to collect the sample.
Quickly open the sterilized sample bottle (100 ml) and collect the
Quantity of bottle:
sample in the shortest time as you can.
03 bottles 1L
During this process, it is very important not to touch the bottle
inside; also you have to avoid the bottle cap be in contact by any 03 bottles 100 ml
surface (operation time: 30 seconds).
By the time of collecting, fill ¾ of the sample bottle in order to
have the sample homogenized in the laboratory.
The same sampling collection must be carried out using one 1L.
bottle (physicochemical analysis) and one sterilized 100 ml.
NOTE:
bottle (bacteriological exams)
Clean the faucet in case it presents any dirt on the In case of any doubts, please, contact Alexandre Jorge
outside. (alexandre.jorge@farstad.com), before doing the
collecting.
Open the water faucet and let it run heavily. It is necessary
because some fecal coliform might multiply into the retained
water while the distribution, or multiply within the joint fibres used This kit is only to collect samples. Being forbidden to use
to stop the distribution.
Reduce the discharge rate on water faucet slowing down the any item for other purposes.
water flow into half session (operation) let it runs for 1 minute.
At first, use the 1L bottle to collect the sample.
Quickly open the sterilized sample bottle (100 ml) and collect the
Quantity of bottle:
sample in the shortest time as you can.
03 bottles 1L
During this process, it is very important not to touch the bottle
inside; also you have to avoid the bottle cap be in contact by any 03 bottles 100 ml
surface (operation time: 30 seconds).
By the time of collecting, fill ¾ of the sample bottle in order to
have the sample homogenized in the laboratory.
The same sampling collection must be carried out using one 1L.
bottle (physicochemical analysis) and one sterilized 100 ml.
NOTE:
bottle (bacteriological exams)