Professional Documents
Culture Documents
It is the most versatile and speedy method of transferring bulk material from one point to another
within a defined area.
Applications
The JCS Screw Pumps are heavy-duty, screw-type pneumatic pumps. These pump systems are
most commonly used to convey dry, free-flowing, pulverized materials from grinding mills, transfer
materials from silo to silo, transfer dust from collectors, and load and unload railcars, ships and
barges. The materials are conveyed literally anywhere a pipeline can be run and to any number of
delivery points.
General Specifications
JCS Screw Pumps are constructed of mild and structural steel, and mounted on a base. PS pumps are
equipped with pedestal blocks that support a pump screw which helps to provide a smooth,
balanced operation. The screw is dynamically balanced and areas of this screw, along with other
parts of the pump in direct contact with the material to be conveyed, are made of hardened, wear-
resistant material and special hard surfacing where required. The screw is directly coupled to the
driving motor but can be v-belt driven.
Standard equipment on PS pumps includes a pressurized seal and bearing assembly that extends
the service life of the discharge seals by preventing the material being handled from entering the
bearing area. Each pump system includes the pump, drive motor and compressed air source.
Operation
The materials to be conveyed enter the hopper by gravity or dumped by any means. The material is
compacted as it is advanced. Its density is further increased in the space between the terminal flight
of the screw and the face of the non-return valve to form a seal against the transport line pressure,
thus preventing blowback. The material then enters the discharge body, is fluidized by compressed
air, and is conveyed into the transport line.
A complete dust collection system will improve indoor air quality by removing dust from a series of
work stations, machines and tools. Furthermore, one large centrally ducted dust collection system
addresses the need for using an industrial air cleaner on each workstation.
One large central dust collector system can often do the work of dozens of smaller, individual air
cleaners, providing complete industrial plant dust collection for the entire facility.
Central dust collection systems generally consist of large media dust collectors (such as cartridges
or bag houses) with an inertial separator used as a pre-sorter (such as a cyclone or drop out box).
The pre-sorter removes large chips, and then the media filtration removes fine particles. Large
chips are collected in bins or drums.
Filtration media often uses some form of cleaning such as mechanical shaking or a sudden pulse of
air that knocks built up dust cake from the filters. Electrostatic precipitators are rarely used for
large dust collectors, since they do not have the capacity to store a large volume of dust. Though,
electrostatic air cleaners are frequently used alongside central systems to clean atmospheric
background dust that is not captured by the ducted system.
Excellence
in Quality
Silo Accessories
JAHANVI ENTERPRISES
# 98, G.T. Road, Near Vishvakarma Chowk,
Opp. Kismat Complex, Ludhiana 141 003
Tel.: 0161-2543852, 6578156
Mobile.: 092166 16156, 098142 16156
Email.: jahanvient@yahoo.com
Website : jahanvienterprises.com