Professional Documents
Culture Documents
When the tool passes this point, its electronics will register
a strong magnetic field and record its location in an internal
Marker Magnet
memory unit together with the precise time of day. In
addition, an odometer constantly logs the distance covered
and again stores this information using the tool’s on-board
software. However, since the odometer is, depending on
the medium, not always completely reliable, the position
N S
of defects is later checked against marker magnet data.
Based on the combined data from the marker magnets and
the odometer, the subsequent analysis can determine the
Product flow
location of any detected defects within the pipeline with great
accuracy.
www.rosen-group.com
Marker Magnets for Pipelines
Technical Specifications
Marker Magnet High-performance marker magnet Encapsulated marker magnet for
for offshore pipelines offshore pipelines
Type MM v1.1 HDMM v1.1 EHDMM v1.1
Dimensions (L × W × H) 202 mm × 92 mm × 42 mm 402 mm × 108 mm × 127 mm 432 mm × 138 mm × 56 mm
Material Ferrite magnet cast in polyurethane Neodymium magnet, screwed into Neodymium magnet, completely
painted steel encapsulated in RoPlasthan
PUR elastomer
Suitable for Pipelines with wall thicknesses up to Pipelines with wall thicknesses up to Pipelines with wall thicknesses up to
16 mm (0.63”) 25.4 mm with an air gap of 0 mm or 25.4 mm with an air gap of 0 mm or
wall thicknesses up to 16.3 mm with wall thicknesses up to 16.3 mm with an
an air gap of 50 mm maximum air gap of 50 mm maximum.
Weight 2.45 kg 30 kg 15 kg
Transport In accordance with IATA regulation In accordance with IATA regulation Measurement value logging according
specifications 902/02: 902/2: to IATA regulation 902/2:
• Classified as magnetic material • Classified as magnetic material • Classified as magnetic material
• Approved for transportation by • Dangerous goods class UN 2807 • Dangerous goods class UN 2807
aircraft (limit value 0.525 μT)
• Dangerous goods class UN 2807
Installation • On the external coating of the pipe- • On the external coating of the pipeline • On top of normal (asphalt/tar/epoxy/
line (asphalt, tar, epoxy, PE) with a (asphalt, tar, epoxy, PE) with a maxi- PE/concrete) external coating with
maximum thickness of 5 mm mum thickness of 50 mm a maximum thickness of 50 mm
• No impairment of cathodic protec- • No impairment of cathodic • Does not affect cathodic protection
tion protection • To be placed outside the girth
• Must be attached outside the area • Must be attached outside the area of weld area
of the girth weld the girth weld • Must be installed at a well-defined
• Must be installed at a clearly de- • Must be installed at a well-defined distance close to existing marker
fined distance near already existing distance close to existing marker posts, or at accurately recorded
marker magnets or at precisely posts, or at accurately recorded position.
recorded XY mapping coordinates position.
(e. g., DGPS); the precise reference
position must be noted
www.rosen-group.com