Professional Documents
Culture Documents
Imperial Electric
Elevator Product Line
GEARED ELEVATOR MACHINES we can supply you with a complete line of high-performance motors
AC Hoist Motors 9 and drive systems to keep your products in motion, and performing
DC Hoist Motors 11 to specifications.
Flange Motors 13
Motor Generator Sets 15 We welcome your questions and comments. Call us at (330) 734-3600
AC Dry Hydraulic Motors 21 Notice of failure or defect must include job name, location, date of start-up, unit serial number, model
number as listed on unit nameplate, KW/HP rating, and description of problem.
Imperial shall have the right to require the buyer to deliver the equipment to a designated service center
and the buyer shall pay all inbound and outbound transportation and for services of any kind, diagnostic
or otherwise, except the direct and actual cost of repair or replacement.
ESCALATORS
Equipment sold but not manufactured by the Imperial Electric Co. will be warranted as to defects in material
AC Escalator Motors 23 and workmanship consistent with the warranty policy of the original manufacturer of the equipment.
The Imperial Electric Co.’s liability under this warranty or any other warranty whether expressed or implied
in law or fact shall be limited to the repair or replacement of defective material and workmanship and
in no event shall it be liable for consequential or indirect damages.
Failure to comply with the above policy places responsibility and cost of repair or replacement with others.
NOTE: The technical information in this product catalog has been reviewed and approved by Imperial Electric technical
and engineering staff. Performance data and dimensions are for reference only and are subject to change. It is the
responsibility of the purchaser to ensure that the specific data for the product they are purchasing is properly confirmed
for their specific application. This analysis should be performed only by individuals with appropriate technical expertise
related to elevator machines and motors. Contact Imperial Electric directly for certified data. Imperial Electric is not
responsible for providing financial remedy for products that were incorrectly specified by the purchaser.
2
I M P E R I A L E L E C T R I C : G E A R L E S S E L E VAT O R M A C H I N E S
Gearless AC Machines
Imperial Electric machines are known for durability and reliability. Imperial Electric gearless • Reduced low speed vibration
AC machines use rugged cast iron frames protecting a totally enclosed, self-cooling motor. • Improved electrical precision at
Machine brake and sheave assemblies are removable and replaceable — features that will very low speed
provide cost savings over long years of service. • Nearly maintenance-free
Imperial Electric provides gearless AC machines in three frame sizes — serving car
Features
capacity ranges from 1,250 to 8,000 pounds at speeds from 100 to 1,400 fpm (feet per
• AC synchronous permanent
minute). The 470 series has the capacity to lift 1,375 to 4,000 pounds at speeds up to 500 fpm
magnet design
with 2:1 roping. The 520 series has the capacity to lift 2,000 to 3,000 pounds up to 700 fpm
with 1:1 roping or 2,200 to 6,500 pounds up to 700 fpm with 2:1 roping. The 800 series has the • Machine, traction sheave, brake
capacity to lift 2,000 to 4,500 pounds up to 1,400 fpm with 1:1 roping or 3,000 to 8,000 pounds and encoder provided
Gearless AC Machines
up to 700 fpm with 2:1 roping. • Totally enclosed, self-cooling
motor — no fan needed
With the introduction of gearless AC machines to complement industry-leading, gearless
DC machines, Imperial Electric boasts the most comprehensive gearless machine line in the • Electronically activated double-
elevator industry. action brake solenoid available
• Brushless — no brushes to
maintain
• Heavy duty components and
construction
• Sub base with secondary
sheave options
• CSA listed
• Re-greasable bearings
Models available:
472, 475, 478, 522, 525, 805, and 808
3
I M P E R I A L E L E C T R I C : G E A R L E S S E L E VAT O R M A C H I N E S
Model 475
• 1,012 LBS
• 790 ft.-lbs brake torque per shoe
• 11,000 lbs maximum sheave shaft load
• 6 - 10mm undercut U grooves single wrap
4
I M P E R I A L E L E C T R I C : G E A R L E S S E L E VAT O R M A C H I N E S
Frame 500 series 1:1 duty table to 3,000 pounds at speeds to 700 fpm
with 1:1 roping or 2,200 to 6,500 pounds
FPM 300 350 400 500 600 700 at speeds to 700 fpm with 2:1 roping.
9.5 11.1 12.7 15.9 19.1 22.3
Freq. (Hz)
Additional features
RPM 57 67 76 95 115 134
Model 522
Capacity (Lbs.) HP Amps HP Amps HP Amps HP Amps HP Amps HP Amps • 2,469 LBS
2000 12.1 30.0 14.1 30.0 16.2 30.0 20.2 30.0 24.2 30.0 28.3 30.0 • 1,250 ft.-lbs brake torque per shoe
2500 15.2 37.0 17.7 37.0 20.2 37.0 25.3 37.0 30.3 37.0 35.4 37.0
• 17,600 lbs maximum sheave
3000 18.2 45.0 21.2 45.0 24.2 45.0 30.3 45.0 36.4 45.0 42.4 45.0
shaft load
Model 525 All specifications at 40% counterweight. Consult Imperial for other ratings.
• 7 - 1/2 inch V grooves single wrap
Model 525
• 3,275 LBS
• 2,335 ft.-lbs brake torque per shoe
• 22,000 lbs maximum sheave
shaft load
• 7 - 1/2 inch V grooves single wrap
5
I M P E R I A L E L E C T R I C : G E A R L E S S E L E VAT O R M A C H I N E S
Additional features
• 40,000 lbs maximum sheave shaft load Model 805 Model 808
• 12 - 5/8 inch on 26 inch sheave or 14 - 9/16 inch • 4,880 LBS • 6,305 LBS
on 22.5 inch U grooves double wrap. • 2,400 ft.-lbs brake torque per shoe • 3,470 ft.-lbs brake torque per shoe
Call for single wrap V grooves
6
I M P E R I A L E L E C T R I C : G E A R L E S S E L E VAT O R M A C H I N E S
Gearless DC Machines
Gearless DC Machines
• CSA listed
• Regreasable bearings
• Split-frame construction available
• Factory breakdown available
Applications
• Gearless traction elevators
7
I M P E R I A L E L E C T R I C : G E A R L E S S E L E VAT O R M A C H I N E S
596 2,875 1,315 2.236 180 0.138 11.79 195 11.00 17.73 1.16
593 2,300 1,232 1.790 180 0.132 9.56 183 10.50 17.40 1.08
591 1,725 1,149 1.346 180 0.117 7.17 195 8.35 23.41 0.94
Additional features
• 2,500 ft.-lbs. braking torque per brake shoe • U-groove, double wrap available
• Sheave shaft loads up to 50,000 lbs. • V-groove, single wrap available
Frame w/
Armature Total
Frame A B C D E F G H J Poles and Other
w/Sheave Weight
Solenoid
598 22.875 18.25 35.438 69.5 38.625 21.25 20.5 18.75 0 3857 4278 1624 9759
596 20.685 16 33.188 65 38.625 21.25 16 18.75 0 3382 3372 1604 8358
593 19.125 14.5 31.688 62 38.625 21.25 13 18.75 0 3069 2807 1591 7467
591 17.625 13 30.188 59 38.625 21.25 10 18.75 0 2753 2247 1579 6579
8
I M P E R I A L E L E C T R I C : G E A R E D E L E VAT O R M A C H I N E S
AC Hoist Motors
Class H available
• Class A temperature rise for
elevator duty
• Mounted encoder optional
• CSA listed
Applications
• Geared traction elevators
• VVVF with encoders, low slip
60 minute duty cycle
• Across the line high slip 30 minute
duty cycle
• 2-speed, 60 minute duty cycle
9
I M P E R I A L E L E C T R I C : G E A R E D E L E VAT O R M A C H I N E S
200 V 15.4 24.5 30.8 34.1 43.8 58.3 70.0 80.4 113.0 132.2 152.0 189.0
208 V 14.8 23.5 29.6 32.7 41.9 55.2 67.0 78.4 108.0 129.3 147.0 182.0
220 V 14.2 21.5 26.6 30.9 39.3 52.4 65.8 72.5 104.0 122.0 139.0 172.0
230 V 13.5 21.6 26.4 29.5 39.0 49.8 61.0 70.4 98.2 116.2 132.2 164.0
240 V 13.6 20.4 26.5 28.9 36.0 47.6 58.6 68.6 95.4 114.2 127.0 156.8
440 V 7.1 10.8 13.3 15.6 19.7 26.2 32.9 36.7 52.0 61.0 69.3 86.0
460 V 6.75 10.8 13.2 14.8 19.5 24.9 30.5 35.2 49.1 58.1 66.1 82.0
480 V 6.8 10.2 13.3 14.2 18.0 23.8 29.3 34.3 47.7 57.1 63.5 78.4
575 V 11.2 8.5 10.5 11.9 15.2 20.1 24.8 28.4 38.6 46.5 53.0 65.5
Efficiency 87.1% 86.9% 88.0% 88.9% 89.0% 89.7% 89.5% 90.8% 90.0% 90.4% 91.4% 91.1%
P/F 79.8% 75.8% 72.4% 88.8% 83.1% 82.6% 85.9% 87.9% 85.1% 88.6% 92.7% 94.2%
BTU/HR 566 864 1,042 1,192 1,416 1,754 2,240 2,322 3,395 4,056 4,312 5,596
Appr.
Frame A B BA C D E F G H J K L1 M N O P T U V W a b AA AB AC AF
Wt.
256T 12.5 12.5 4.25 25.625 6.25 5 5 .75 .531 2.25 2.5 9.25 9.125 4.125 12.312 12.125 2.375 1.625 3.75 .125 .375 .187 1.5 11 8.75 4 225
284T 14 12.5 4.75 26.875 7 5.25 4.75 .875 .531 2.75 3 9.5 9.375 4.75 13.812 13.75 2.375 1.875 4.375 .125 .5 .25 1.5 11.75 9.5 4 300
286T 14 14 4.75 28.375 7 5.5 5.5 .875 .531 2.75 3 10.25 10.125 4.75 13.812 13.75 2.375 1.875 4.375 .125 .5 .25 1.5 11.75 9.5 4 325
324T 16 14 5.25 29.5 8 6.25 5.25 1 .656 3.25 3.5 10.5 10.375 5.375 15.812 15.625 2.375 2.125 5 .125 .5 .25 2 12.75 10.5 4 400
326T 16 15.5 5.25 31 8 6.25 6 1 .656 3.25 3.5 11.25 11.125 5.375 15.812 15.625 2.375 2.125 5 .125 .5 .25 2 12.75 10.5 4 450
365T 18 16.25 5.875 33 9 7 6.125 1 .656 2.5 3 11.875 11.875 6 17.812 18.625 2.75 2.375 5.625 .125 .625 .312 3 15.875 12.812 4.5 610
405T 20 17.75 6.625 37.5 10 8 6.875 1 .812 3 3.5 13.5 13.375 7.375 19.812 19.625 2.75 2.875 7 .125 .75 .375 3 15.875 12.875 4.5 865
10
I M P E R I A L E L E C T R I C : G E A R E D E L E VAT O R M A C H I N E S
DC Hoist Motors
DC Hoist Motors
• Class B or F insulation available
• Class A temperature rise for
elevator duty
• CSA listed
Applications
• Geared traction elevators
11
I M P E R I A L E L E C T R I C : G E A R E D E L E VAT O R M A C H I N E S
Appr.
Frame A B BA C D E F G H J K L1 M N O P T U V W a b AA AB AC AD AF
Wt.
284AT 14 12.5 4.75 26.625 7 5.5 4.75 .531 .531 2.25 3.062 13.375 9.375 3.875 13.875 13.75 2.375 1.875 3.5 .125 .5 .25 2 11.625 9.375 6.625 4 375
286AT 14 14 4.75 28.125 7 5.5 5.5 .531 .531 2.25 3.062 14.125 10.125 3.875 13.875 13.75 2.375 1.875 3.5 .125 .5 .25 2 11.625 9.375 7.375 4 410
324AT 16 14 5.25 28.25 8 6.25 5.25 .656 .656 2.5 3.625 13.5 10.375 4.375 15.875 15.75 2.75 2.125 4 .125 .5 .25 2 12.625 10.375 6.75 4 600
326AT 16 15.5 5.25 29.75 8 6.25 6 .656 .656 2.5 3.625 14.25 1.125 4.375 15.875 15.75 2.75 2.125 4 .125 .5 .25 2 12.625 10.375 7.5 4 675
366AT 18 18 5.875 34.125 9 7 7 .781 .812 3 4.25 16.5 12.75 4.875 17.875 17.688 3 2.375 4.5 .125 .625 .313 3 14.813 11.75 7.875 4.5 840
367AT 18 20 5.875 35.875 9 7 8 .781 .812 3 4.25 17.25 13.75 4.875 17.875 17.688 3 2.375 4.5 .125 .625 .313 3 14.813 11.75 8.625 4.5 930
368AT 18 22 5.875 37.875 9 7 9 .781 .812 3 4.25 18.25 14.75 4.875 17.875 17.688 3 2.375 4.5 .125 .625 .313 3 14.813 11.75 9.625 4.5 1060
407AT 20 22 6.625 42.625 10 8 9 .781 .812 3 4.25 21.75 15.438 5.438 20 19.875 3 2.625 5 .188 .625 .313 3 15.313 12.875 11.25 4.5 1390
S409AT 20 26 6.625 46.625 10 8 11 .781 .812 3 4.25 23.75 17.438 5.438 20 19.875 3 2.625 5 .188 .625 .313 3 15.313 12.875 13.25 4.5 1540
12
I M P E R I A L E L E C T R I C : G E A R E D E L E VAT O R M A C H I N E S
Flange Motors
(including AC V V VF and DC)
Applications
Flange Motors
• Geared traction elevators
• AC VVVF with encoders, low slip
60 minute duty cycle
Nema C • AC across-the-line, high slip
30 minute duty cycle
• AC 2-speed, 60 minute duty cycle
• DC shunt wound, 60 minute
duty cycle
Armor/Northern
Direct replacement motors for most
popular machines. Performance data on following page
13
I M P E R I A L E L E C T R I C : G E A R E D E L E VAT O R M A C H I N E S
Compatibility table
1200 RPM, low slip, 200V–575V, 3-phase, 60 Hz
Horsepower
Machine Flange
5 10 12.5 15 20 25 30 40 50 60 75 100
#2&3 • • • • • • • • • • • •
Armor
#2 (Serge)* • • • • • • • • •
Dover GD1 • • • • • • • • •
NEMA C • • • • • • • • • • • •
Haughton
NEMA D • • • • • • • • • • • •
KONE MR26-35 • • • • • • • • • • • •
Montgomery 207E • • • • • • • • • • • •
C • • • • • • • • • • • •
NEMA
D • • • • • • • • • • • •
TW151* • • • • • • • • •
TW160* • • • • • • • • •
Northern
TW280* • • • • • • • • • • • •
TW340* • • • • • • • • • • • •
17CT • • • • • • • • •
Otis 22CT • • • • • • • • •
29CT • • • • • • • • •
Renold NEMA C • • • • • • • • • • • •
Schindler NEMA D • • • • • • • • • • • •
Titan 1 • • • • • • • • • • • •
28 • • • • • • • • • • • •
Westinghouse
38 • • • • • • • • • • • •
Motors are 2 ball bearing designs unless otherwise noted (*single ball bearing design).
Alternate speeds (RPM) and enclosures available, consult Imperial Electric.
All flange mounted requirements need customer review of dimension sheets.
BF BF Appr.
Frame C L P T U V W a b AA AB AC AF AH AJ AK BB BC BD BF BG
Tap Size Depth Wt.
256TC 25.625 9.25 12.125 2.375 1.625 3.75 0.125 0.375 0.187 1.5 11 8.75 4 3.75 7.25 8.5 .25 -0.25 10 4 1/2–13 0.75 9.5 225
284TC 26.875 9.5 13.75 2.375 1.875 4.375 0.125 0.5 0.25 1.5 11.75 9.5 4 4.375 9 10.5 .25 -0.25 11.25 4 1/2–13 0.75 9.75 300
286TC 28.375 10.25 13.75 2.375 1.875 4.375 0.125 0.5 0.25 1.5 11.75 9.5 4 4.375 9 10.5 .25 -0.25 11.25 4 1/2–13 0.75 10.5 325
324TC 29.5 10.5 15.625 2.375 2.125 5 0.125 0.5 0.25 2 12.75 10.5 4 5 11 12.5 .25 -0.25 14 4 5/8–11 0.9375 10.75 400
326TC 31 11.25 15.625 2.375 2.125 5 0.125 0.5 0.25 2 12.75 10.5 4 5 11 12.5 .25 -0.25 14 4 5/8–11 0.9375 11.5 450
365TC 33 11.875 18.625 2.75 2.375 5.625 0.125 0.625 0.312 3 15.875 12.812 4.5 5.625 11 12.5 .25 -0.25 14 8 5/8–11 1 12.25 610
405TC 37.5 13.5 19.625 2.75 2.875 7 0.125 0.75 0.375 3 15.875 12.875 4.5 7 11 12.5 .25 -0.25 15.5 8 5/8–11 1 13.75 865
14
I M P E R I A L E L E C T R I C : G E A R E D E L E VAT O R M A C H I N E S
Imperial Electric can deliver units to meet special requirements. Standard DC loop voltage Features
is 240 volts with special DC loop voltages available. 4-bearing DC to DC and TEFC units are • Drip-proof enclosure
also available. Compound wound units are standard but shunt and special wound units are
• Regreaseable ball bearings
available. Call us with your requirements.
• 7.5 KW–75 KW ratings
Learn how Imperial Electric can benefit your next project. Call your representative today for
• 240 volt DC loop standard
more information.
• Special DC loop voltages available
• 1,750 RPM
• AC input voltages — 200, 230/460,
575 3-phase
Applications
• Geared traction elevators
• Compound wound standard
• Shunt wound available
• Special wound available
• Gearless DC machines
15
I M P E R I A L E L E C T R I C : G E A R E D E L E VAT O R M A C H I N E S
AB AC AF AA
Appr.
Frame C L O P T X AD AG A B D E 2F H J K CG
Wt.
GEN MOT GEN MOT GEN MOT GEN MOT
284A/280T 30.937 13.75 14.25 13.75 2.375 18.125 11.75 10.187 9.5 8.562 6.625 4 2.75 7 1.5 1 13.25 11.25 7 5.5 9.5 .531 1 8.25 590 1.6
286A/280T 32.437 14.5 14.25 13.75 2.375 19.625 11.75 10.187 9.5 8.562 7.375 4 2.75 7.75 1.5 1 13.25 13 7 5.5 11 .531 1 8.25 635 1.8
324A/320T 34.062 14.75 16.25 15.75 2.75 20 12.375 12.375 9.375 9.375 7.375 4 4 7.75 2 2 14.25 12.875 8 6.25 10.5 .656 1.187 8.625 785 1.75
366A/320T 35.562 15.5 16.25 15.75 2.75 21.5 12.375 12.375 9.375 9.375 8.125 4 4 8.5 2 2 14.25 14.375 8 6.25 12 .656 1.187 8.625 870 2.08
366A/360T 41.562 18.5 18.25 17.647 3 24.75 14.375 14.375 11.75 11.75 8.5 4.5 4.5 9.625 3 3 16.75 16.75 9 7 14 .812 1.187 10.125 1175 2.0
367A/360T 43.312 19.5 18.25 17.647 3 27.25 14.375 14.375 11.75 11.75 9.25 4.5 4.5 10.625 3 3 16.75 18.75 9 7 16 .812 1.187 10.125 1250 2.23
368A/360T 45.312 20.5 18.25 17.647 3 29.25 14.375 14.375 11.75 11.75 10.25 4.5 4.5 11.625 3 3 16.75 20.75 9 7 18 .812 1.187 10.125 1325 2.5
407A/360T 56.062 21.75 20.375 19.875 3 28.125 15.312 15.875 12.875 12.812 22.312 4.5 4.5 11.25 3 3 19 20 10 8 18 .937 1 11.75 1940 2.5
16
IMPERIAL ELECTRIC: MACHINE AND MOTOR ACCESSORIES
Imperial Electric offers flexible couplings and adapters with its heavy-duty line of AC & DC Elevator Duty Motors for geared traction machines. The couplings
and adapters are also available for both flange or foot-mount machines manufactured by companies such as Armor, Dover, Gurney, Montgomery, Otis,
Schindler-Haughton, Serge and Westinghouse. Other couplings are available upon request.
The three-part coupling consists of a drum-mount flange, polyurethane disc and a motor adapter plate for flange motors. When assembled and properly
installed, the poly disc reduces vibration and noise carry-through to the car due to any misalignment. End thrusting of motor shafts and overloading of
bearings are also reduced.
Flexible Couplings are also available in kit form for field modifications. The couplings with Taper-Lock™ fittings have flange bolt patterns that are identical
to the rigid couplings they replace which allows for motor replacement within a few hours.
Flexible Coupling
Gurney Flange
Foot Mounted
17
IMPERIAL ELECTRIC: MACHINE AND MOTOR ACCESSORIES
Encoders:
Incremental Hollow Shaft Absolute Taper Shaft Encoder Absolute Hollow Shaft Encoder Cables
Encoder for Hoist Motors for Frame 400 and 500 Series Encoder for Frame 800 Series
Gearless AC Machines Gearless AC Machines
Submersibles: Gearless:
Elevator Machine Accessories
Sub-Base/Sub-Structure Deflector/Secondary
Sheave
18
I M P E R I A L E L E C T R I C : H Y D R A U L I C E L E VAT O R S
AC Submersible
Hydraulic Motors
Durable, high-efficiency
submersible motors
80 Series
19
I M P E R I A L E L E C T R I C : H Y D R A U L I C E L E VAT O R S
20
I M P E R I A L E L E C T R I C : H Y D R A U L I C E L E VAT O R S
Applications
• Dry hydraulic elevators
21
I M P E R I A L E L E C T R I C : H Y D R A U L I C E L E VAT O R S
Appr.
HP Frame A B BA C1 D E F G H J K L1 M N O P T U V W a b AA AB AC AF
Wt.
15 215T 10.5 9 3.5 17.312 5.25 4.25 3.5 .625 .406 1.75 2 6.937 6.875 3.5 10.312 10.125 — 1.375 3.125 .125 .312 .156 1 8.562 6.937 2.75 125
20 254T 12.5 10.75 4.25 20.75 6.25 5 4.125 .75 .531 2.25 2.5 8.375 8.25 4.125 12.312 12.125 2.375 1.625 3.75 .125 .375 .187 1.5 11 8.75 4 200
25 256T 12.5 12.5 4.25 22.5 6.25 5 5 .75 .531 2.25 2.5 9.25 9.125 4.125 12.312 12.125 2.375 1.625 3.75 .125 .375 .187 1.5 11 8.75 4 225
30 284T 14 12.5 4.75 23.625 7 5.25 4.75 .875 .531 2.75 3 9.5 9.375 4.75 13.812 13.75 2.375 1.875 4.375 0 .5 .25 1.5 11.75 9.5 4 300
40 286T 14 14 4.75 25.125 7 5.25 5.5 .875 .531 2.75 3 10.25 10.125 4.75 13.812 13.75 2.375 1.875 4.375 0 .5 .25 1.5 11.75 9.5 4 325
50 324T 16 14 5.25 26.25 8 6.25 5.25 1 .656 3.25 3.5 10.5 10.375 5.375 15.812 15.625 2.375 2.125 5 .125 .5 .25 2 12.75 10.5 4 400
60 326T 16 15.5 5.25 27.75 8 6.25 6 1 .656 3.25 3.5 11.25 11.125 5.375 15.812 15.625 2.375 2.125 5 .125 .5 .25 2 12.75 10.5 4 450
75 364T 18 15.25 5.875 28.75 9 7 5.625 1 .656 2.5 3 11.375 11.375 6 17.812 18.625 2.75 2.375 5.625 .25 .625 .312 3 15.875 12.812 4.5 550
100 365T 18 16.25 5.876 29.75 9 7 6.125 1 .656 2.5 3 11.875 11.875 6 17.812 18.625 2.75 2.375 5.625 .25 .625 .312 3 15.875 12.812 4.5 610
22
I M P E R I A L E L E C T R I C : E S C A L AT O R S
AC Escalator Motors
The Frame YFT160 universal escalator motor is designed specifically for modern, automatic
escalators. The motor is factory equipped with a spring-applied, electrically released brake.
The YFT160 uses a self-cooling, six pole, three-phase, AC induction motor providing high
performance, high starting torque, and long term reliability along with low noise and low
vibration. Motor ratings and mounting dimensions correspond to IEC standards for easy
operation and maintenance.
The motor is designed for 30 starts per hour using WYE/Delta, Across the Line, or Soft
starting confi gurations. The motor is available in 7.5 kW and 11 kW power output ratings
(16.2 and and 23A respectively).
AC Escalator Motors
Rated Output Full Load
Start Torque Max Torque Protection
Type
Rated Torque Rated Torque Grade
Weight a traditional continuous operating
kW hp Current (A) rpm Efficiency Power Factor
environment.
YFT160M-6K 7.5 10 16.2A 965 86.8% 0.81 2.5 3.3 IP21 342 lbs (155 kg)
YFT160M-6K 11 15 23.0A 960 86.8% 0.84 2.3 3.1 IP21 397 lbs (180 kg)
Benefits
Note: Dimensions in Metric • Spring applied, electrically
released brake
• Universal application
• Built in cooling fan
Features
• Cast iron construction
• Rated for 30 starts per hour
• 7.5 and 11 kW power ratings
• Voltages: 200, 208, 220, 230,
380 - 400, 415, 440, 460, 480,
500 VAC 3-phase, 50/60 Hz
• Insulation Class F, VDE 0530
Supplement 2
• -5° to 40°C Ambient
• IEC, CE, CSA approved
Applications
• Escalators
• Moving walk ways
23
Major Markets Kinetek is a global manufacturing enterprise that provides custom engineered control,
motor and drive system solutions for world class customers in the elevator/escalator,
• Elevator and Escalator
commercial floor care, material handling, golf car/electric vehicle, commercial
• Commercial Floor Care appliance and medical markets.
• Material Handling
• Commercial Appliance Kinetek companies operate over 25 facilities in North America, Europe and Asia and
• Golf Car and Utility Vehicle have achieved market leading positions by utilizing a broad global base of advanced
• Aerial Work Platform technology to provide custom engineered solutions. Kinetek’s comprehensive range
• Medical of product lines includes AC, DC and brushless DC electric motors, pumps, gearing,
gearboxes, fans, electronic controls/systems and contract manufacturing.
Corporate Office 1503 Exeter Rd. East Coast Office Phone: (908) 575-7950
Akron, OH 44306 Fax: (908) 575-7958
Phone: (330) 734-3600
Fax: (330) 734-3601
Email: sales@imperialelectric.com
Web: www.imperialelectric.com
Imperial Electric — a custom manufacturer of special application AC and DC motor systems. Imperial manufactures a
complete line of products for the elevator/escalator market including AC and DC gearless machines, AC and DC hoist motors
and submersible motors. With the recent acquisition of Howell Electric Motors, Imperial expands its established leadership
in the elevator/escalator, floor care and hose reel markets to include restaurant kitchen equipment.
Euclid Universal — develops custom engineered gear motors, transmissions (traction drives) and gearing for the floor care,
medical/mobility, load moving and loose gearing markets.
Scott DC Power Products — designs and manufactures high output DC motors for the floor care market, hydraulic pump drive
motors for industrial lift applications, and traction drive motors.
Motion Control Engineering (MCE) — is the world’s leading open-architecture elevator controller manufacturer —
providing traction and hydraulic elevator controllers, peripherals and components to independent elevator contractors, OEM
elevator manufacturers and educational/healthcare institutions. MCE has an installed base of more than 100,000 elevator
controls worldwide.
Zhongxiu Kinetek (ZXK) — is one of the leading Chinese elevator controller manufacturers. ZXK’s ISO 9001 certified facility
boasts two elevator test towers and supports production for domestic and international customers. ZXK products have
received CE certification by TUV.
Kinetek Desheng (KDS) — maintains a strong position in China in several industries and is the number one Chinese elevator
motor manufacturer. KDS is an ISO-certified manufacturer of AC and DC motors, brushless DC motors, general purpose
motors, gearboxes and end products. KDS’ brushless gearless products have received CE certification by TUV.
FIR Group — designs and manufactures custom made AC and brushless DC motors and pump motor packages for highly
specialized industrial and commercial markets — including door operator motors for the elevator industry. FIR maintains
strong market positions in European construction, defense and commercial appliances — including commercial ovens and
catering dishwashers.
Merkle-Korff Industries — specializes in the design and manufacture of subfractional AC, DC, and brushless motors and gear
motors. Merkle-Korff is a leader in the refrigeration, bottle/can vending and pellet stove market segments.
Advanced Motors & Drives — designs and manufactures special purpose, wound field DC and low-voltage AC pump and
traction motors for battery operated vehicles. Advanced holds market-leading positions in golf and utility vehicles and aerial
work platforms; and is also strong in forklift and floor care (ride-on segment) markets.
Kinetek Controls specializes in application specific, custom motor control design and production. Kinetek Controls designs
optimum performing products — including motor controllers, high frequency battery chargers, and multifunction displays
— which are cost effective and highly reliable. They are used in a variety of applications including material handling, floor
care, recreational vehicles, lift trucks, food processing, golf and other electric vehicles.
IMP-CAT-01-0708