of performance and application BIOCIDE F™ is formulation, which is a highly effective sterilizing benefits. chemical and a Biocide, compatible with thin film composite membranes. Biological fouling is considered to be the worst fouling Instantaneous in RO system. High differential pressure across the 1st stage with loss antimicrobial activity as a of product flow indicates biological fouling. It is believed that where non-oxidizing bactericide. water is present biological activity is present. Bacteria free feed water Compatible with the thin to RO system is very difficult to maintain, however control of film and cellulose acetate biological activities can be achieved by dosing BIOCIDE F™ membrane. intermittently. Kills bacteria, fungi and algae. APPLICATION: Exclusively for use in non- Biological activity is controlled by finding the T.B.C level in reject portable applications. stream the dose rate can be increased or decreased according to the Being of low molecular T.B.C result weight it passes through DOSING GUIDELINES: the permeate side, hence During membrane cleaning step, 1-1.5% BIOCIDE F™ solution is sterilizing the permeate circulated for 1-2 hours after acid cleaning and before alkaline side of the membrane cleaning step. envelope. DILUTION: It can be used in This product is formulated to be injected neat. However, if a dilution conjunction with RO is required, use demineralized or RO permeate water. If neither of TREAT 5000, 5010, 5020. these is available, softened water may be substituted. The dilution for Biocide F™ should not result in a solution strength of less than 10%. PACKAGING AND STORAGE: DOSING: Standard regional pack sizes are listed below and custom packaging BIOCIDE F™ is dosed at the can be provided worldwide. Information on drum less or bulk tanker rate of 70-100 ppm during delivery is available on request. flushing sequences of plant, however this could also be SPECIFICATIONS dosed intermittently incase Appearance Transparent Liquid system is in continuous operation. To calculate the pH (as supplied) 3.00-5.00 dose rate of Biocide F in Specific Gravity @20˚C 0.9 – 1.02 g/cm3 liter/hour the following odor Pungent smell formula can be used. Plant feed flow rate m3/hr*Dose required g/m3 Packaging Formats Pakistan 1000 Jerrycan 30 Kg Other packing is available on request.