Professional Documents
Culture Documents
ChangeLog-update013 7
ChangeLog-update013 7
7 (20201210): update
! Expiry extended...
+ Option in CSM/RT section to choose the ratio to strength scale between the
ancient 0-9
and a new testing one 0-10. Please be aware that this affects CSM, RS, BQR and
GAP.
! Fixed? https://www.forexfactory.com/showthread.php?p=12019226#post12019226
+ Signals age filter module, will ignore signals with less than MIN or more than
MAX minutes.
It's comma separated MIN,MAX input field accepting unsigned integer numbers.
Shortcuts: [,MAX] will ignore signals having more than MAX minutes of lifetime.
[MIN,] will ignore signals having less than MIN minutes of lifetime.
~ [Auto][Close] lock by PiPs offset filter now allows CSV [MIN,MAX] input, ignoring
or locking orders having PiPs among MIN and MAX.
It's comma separated MIN,MAX input field accepting floating-point numbers.
Shortcuts: [,MAX] will lock orders having less than MAX PiPs (ancient behavior).
[MIN,] will lock orders having more than MIN PiPs.
! Fixed? https://www.forexfactory.com/showthread.php?p=11893076#post11893076
! Fixed? https://www.forexfactory.com/showthread.php?p=11892830#post11892830
___________________________________________________________________________________
____________
+ Negative number as input for '"hold %ADR(10) since last open order" [H] scope' as
suggested here: https://www.forexfactory.com/showthread.php?
p=11107891#post11107891
This is yet experimental and should be tested closely paying attention...
Some minor fixes nor improvements, and new bugs as usual as well...
! Fixed bug affecting bulk set of SL/TP on existing orders when SL/TP was equal to
0.0 (reset)
Test drive release expiring in the next new year's eve GMT.
___________________________________________________________________________________
____________
! Fixed bug on weekly session failing to correctly set the end of the week on some
scenarios.
Some minor fixes nor improvements, and new bugs as usual as well...
Test drive release expiring in the next new year's eve GMT.
___________________________________________________________________________________
____________
___________________________________________________________________________________
____________
+ Weekly session (server time based) replacing 24x5 hardcoded all day (local time)
session
+ Only [Auto] add orders upon profit +/- criteria, replacing "Only add to
profitable"
+ PINS extended to 9.
Test drive release expiring in the next new year's eve GMT.
___________________________________________________________________________________
____________
! Fixed? https://www.forexfactory.com/showthread.php?p=10858825#post10858825
- Rename allowed, but only adding to the original name (undocumented addition of
012.9)
- Check for StopFlag temporarily removed (undocumented addition of 012.9)
+ Button for 'Close trades on session(s) end' in sessions box
+ Sessions shows an ® to the right of their status in sessions box when set to
reset EAX.
! Fixed? https://www.forexfactory.com/showthread.php?p=10833419#post10833419
! Fixed? https://www.forexfactory.com/showthread.php?p=10833687#post10833687
Other minor fixes nor improvements, and new bugs as usual as well...
___________________________________________________________________________________
____________
! Fixed? bug that close trades on EAX start when «Close trades on session(s) end»
is enabled
! Fixed? CSM/RT header wasn't show as enabled on EAX start when set as enabled in
properties
___________________________________________________________________________________
____________
+ Option to try to get rid of indicators (if any) in chart window at load time.
+ PINS have a feed presence color. (hardcoded by now).
+ Spread value modifiable on-screen live.
+ Maximum value for ADR
+ Maximum value for CDR
~ SL in PiPs/%ADR changed its behaviour and is like the Basket SL introduced in the
version 006b,
a negative number is required to effectively do as SL, otherwise it will act as
kind of PL, but
beware that selected order(s) must be already in profit to PL to work or it will
fail.
! Fixed? https://www.forexfactory.com/showthread.php?p=10542078#post10542078
! Fixed? https://www.forexfactory.com/showthread.php?p=9588252#post9588252
! Fixed? https://www.forexfactory.com/showthread.php?p=9497576#post9497576
https://www.forexfactory.com/showthread.php?p=9577973#post9577973
https://www.forexfactory.com/showthread.php?p=10793525#post10793525
https://www.forexfactory.com/showthread.php?p=10794045#post10794045
https://www.forexfactory.com/showthread.php?p=10794103#post10794103
! Fixed? https://www.forexfactory.com/showthread.php?p=9586739#post9586739
! Some preset names changed in SESSION and ENVIRONMENT sections, thus earlier .set
would require revision.
Other minor fixes nor improvements, and new bugs as usual as well...
___________________________________________________________________________________
____________
! Fixed news hold filter not properly working when news level = None.
! Fixed news hold filter not properly working with hidden basket block.
Other minor fixes nor improvements, and new bugs as usual as well...
___________________________________________________________________________________
____________
DBMASMEAX007a3.update12 (20161023):
~ Hold filter:
+ Scope: hold [bars,period] since last open order [experimental]
Comma separated [bars,period]. Period can be any regular
time-frame or a custom off-line one (by now, to properly
work with off-line charts, they should be open.
- Define "hold minutes since last [...] order" [H] scope
+ Define "hold minutes since last open order" [H] scope
+ Define "hold minutes since last closed order" [H] scope
- Define "one order per bar (order [...] time)" [H] scope
+ Define "one order per bar (order open time)" [H] scope
+ Define "one order per bar (order close time)" [H] scope
+ Define "hold [bars,period] since last open order" [H] scope
~ Charts:
- Timeframe to open a new chart
- Template to use when opening a new chart
+ Use [template,timeframe] to open charts [NEW WAY]
Comma separated [template,timeframe]. The two removed
inputs merged into this one, where «timeframe» can be
any regular time-frame or a custom off-line one as long
as it's available.
~ Interface:
+ Edit box for [template,timeframe].
+ Informative box for Sit-On-Hands scopes.
+ Color for «Exit(close) on opposite signal» (default=Gainsboro).
+ Color for «Exit(close) on absent signal» (default=Black)
+ Color for «Exit(close) on lost signal» (default=DimGray)
+ Profit, Account and Clock are now movable just like Sessions, MTS and News.
~ Other minor changes/updates.
Updated releases of MADdash and BidRadio PINS with reverse option added
___________________________________________________________________________________
____________
DBMASMEAX007a3.update11 (201610141356):
!! Fixed?
http://www.forexfactory.com/showthread.php?p=9196137#post9196137
___________________________________________________________________________________
____________
Mixed exit modes/scopes requires the «Close on any enabled close/exit alert»
feature to be enabled ([ANY] button right over [Close] or it related preset).
!! Fixed?
http://www.forexfactory.com/showthread.php?p=9174845#post9174845
http://www.forexfactory.com/showthread.php?p=9182281#post9182281
http://www.forexfactory.com/showthread.php?p=9179793#post9179793
http://www.forexfactory.com/showthread.php?p=9181138#post9181138
http://www.forexfactory.com/showthread.php?p=9188136#post9188136
___________________________________________________________________________________
____________
DBMASMEAX007a3 (20161002): Most Relevant since last update:
Fixed?: (it seems it only happens when having a custom symbols selection)
! http://www.forexfactory.com/showthread.php?p=9156617#post9156617
___________________________________________________________________________________
____________
Fixed?:
! http://www.forexfactory.com/showthread.php?p=9156077#post9156077
! http://www.forexfactory.com/showthread.php?p=9141815#post9141815
Other minor bugs nor issues fixed and surely new ones introduced... ;)
___________________________________________________________________________________
____________
Other bugs nor issues fixed and probably new ones introduced... as usual as well ;)
___________________________________________________________________________________
____________
This is a bug-fix revision related to what was reported in the following posts:
http://www.forexfactory.com/showthread.php?p=9035628#post9035628
http://www.forexfactory.com/showthread.php?p=9037981#post9037981
___________________________________________________________________________________
____________
! Several improvements or minor additions and some new bugs as usual as well.
___________________________________________________________________________________
____________
+ Shows last order open and close time while hovering the orders block rows.
+ Button to take snapshot of current screen state [SS]. A pop-up alert will show
where it was saved and under what name.
+ Set [TP|SL] buttons are now independent of each other so you can set one not
messing with the other. A combined [TP&SL] is available as well.
- Clear TP/SL button removed because setting [TP&SL] to 0 has the same effect now.
+ Bias shows two additional time periods (medium and long term - can be
hidden/disabled).
! Some other bugs that I managed to catch since previous revision were resolved and
probably new ones were introduced as well :)
___________________________________________________________________________________
____________
! Fixed an issue found in the new and experimental filter on previous[p] candle bar
direction check that won't properly update in some cases.
If you didn't experienced issues, you can just ignore this update.
___________________________________________________________________________________
____________
~ Strength% time-frames not correctly displaying their updated value after changing
them in EA properties has been corrected.
! Some other bugs that I managed to catch since previous revision were resolved and
probably new ones were introduced as well :)
___________________________________________________________________________________
____________
~ Bulk Set and Clear TP/SL changed it behaviour: Only orders with [SYMBOL(s)]
enabled will be affected.
+ BidRatio module [BidR%] with new way of displaying data +/- 100 (old one using 0
to 100 is still there).
+ Take snapshot at close (experimental): basket close and orders closed by exit on
opposite signal.
+ MA time-frame added.
+ MA time-frames can be interactively enabled/disabled.
+ MA period is time-frame independent now.
! Open chart button bug fixed (it sometimes loaded a chart in the EA one, unloading
it).
As usual ... many bug fixes and some new ones as well ...
___________________________________________________________________________________
____________
+ Very Experimental filter based in Pivots Points and Trigger Zones [PTZ].
There are two hard-coded trigger zones: Pivot to R2 for Longs and Pivot to S2 for
Shorts.
It will show a text (and tool-tip) representing where is the current bid price in
relation to Pivot/S&R.
There are options to avoid trades around Pivot/S&R by the specified amount of
PiPs when the filter is enabled (this could be a separated filter).
Several minor improvements or additions and some new bugs as usual as well.
___________________________________________________________________________________
____________
The most important update is related to resources usage, it is now much lighter in
CPU usage.
TP or SL in Pips or %ADR are unchanged by now, thus positive numbers must be used
for either one.
+ Pivot container now shows warning when price is around PL or R3/S3 (it isn't a
filter, only a visual by now).
+ Pivot container now shows R3, R2, R1, PL, S1, S2 and S3 values in tool-tips.
+ Orders requiring TP/SL are opened with their corresponding stops now, so if an
"invalid stops" error is returned by the server, the order is immediately rejected.
This is a big improvement over previous revisions where this was a two steps
procedure. (orders placed with no stops and TP/SL set afterwards, ending with some
orders -due to TP/SL too close to price- with no stops where a stop should have
been placed). This modification aims to fix the referenced issue, rejecting orders
with invalid stops in real time.
Some cosmetic changes because I'm not really happy yet with it current design.
As usual ... many bug fixes and some new ones as well ...
___________________________________________________________________________________
____________
* Stop trading after basket(s) amount set in preferences was not properly working
in devX006.
This update aims to fix this issue. Please report back if it doesn't.
___________________________________________________________________________________
____________
Pairs:
+ Filter what pairs are allowed to operate directly from the dashboard.
This means that we can now choose which pairs we want to let the EA to consider
when in auto-mode.
The default in this revision is all unselected, and an option to auto-enable all
is included in properties.
+ [ALL/NONE] (for all pairs) button at header of pairs container has been
implemented to perform bulk enable/disable of pairs.
This button will select or deselect all based on last action taken.
+ Basket buttons to enable/disable pairs in the dashboard implemented.
Filters:
~ ADR filter was not properly filtering and has been fixed.
+ Narrow pairs HeatMap version added and its default now. It now supports all the 9
regular time-frames as well.
+ BidRatio upper and lower limits for trigger.
HeikenAshi:
+ HA options to allow the user to select what time-frames to be used for direction
directly at EA preferences.
+ HA TF buttons changed it behaviour, time-frames can now be selected live to
enable them to be used for direction.
+ HA filter button changed it behaviour a little bit as well, now it is more like
the Candles button is.
+ Choose the HA candle for open/close comparison.
Summarizing how the HeinkenAshi module will work in this revision: the time-frame
buttons will enable each time-frame
to be used for direction matching, but they will not activate the filter by
themselves (as in the previous release),
to do so, the main HeikenAshi button must be used (requires at least one time-frame
enabled for direction).
News:
+ Option to open news URL in default web browser when a pair/currency displays news
alerts.
This has been added to the two news modules available right now.
The news URL can be customized in preferences. The default is the Forex Factory
one.
~ Rewrite most of the news module (bugs fixes and optimization, and probably new
bugs)
Charts:
+ Dedicated button to open charts [~]
+ Button to open charts of all selected pairs [+] at header of the new charts
module (it might be relocated afterwards)
+ Button to close charts of all selected pairs [-] above the previous buttons (it
might be relocated afterwards)
+ Basket buttons to open all pair charts of the given currency.
Sessions:
+ 4th session added.
+ Option to reset/preserve data between sessions
+ Option to reset/preserve data when back from preferences
+ Reset lot size when clicking on it own button.
+ Session shows as closed while in weekend. Needs further testing.
Other:
+ Many tool-tip's improved
+ This revision should be more CPU friendly. If you have issues regarding high CPU
usage, HeatMaps and indicators (HA in particular) are very CPU intensive.
As usual ... many bug fixes and some new ones as well ...
___________________________________________________________________________________
____________
DBMultiASM(10230)devX201511272338b:
+ Tool-tips added to many elements, mostly to the new ones and to the ones I have
found to be more important... so most are self explanatory...
! A bug not auto-enabling filtering on HA when enabled in settings was found and
fixed.
! An issue related to the possibility to enable/disable individual HA time-frames
once the HA filter is active is now resolved.
___________________________________________________________________________________
____________
DBMultiASM(10230)devX201511191252:
This is mostly a bug fix update related to the news alerts that were not being
cleared in basket block neither in pairs rows when they should.
If you still find this update too buggy, please stick to the previous one that
works for you while next comes. I have some on going things I don't want to mix.
___________________________________________________________________________________
____________
DBMultiASM(10230)devX201511182007:
The most important thing on this update is that it seems that I managed to fix the
issue related to the news alert being deactivated/activated again during news
releases time. I kept a close eye during latest news releases and it did pretty
well here, so let's see how it does there. I wouldn't post an update yet if it
weren't for that ugly bug...
+ NewsCal can be used from inside the Dashboard. NewsBrk as well. Both indicators
required (and included in package).
NewsCal is the default news "viewer" in this update, but the previous one can be
selected instead.
+ Allow to choose if auto-add magic number to order comment. [NEW] Needs further
testing.
+ Allow to choose maximum size of order comment. It will be trimmed to specified
size if greater. [NEW] Needs further testing.
+ Added new clock (external one dropped)
+ LongAll and ShortAll buttons added. Needs further testing.
+ Shows range since last D1 (Last Hi&Lo as well). Needs further testing/checking,
review and "design"
+ Many tool-tip's added. Needs to add more though... in progress..
+ News column impact will be colored based on chosen impact when in the on-hold
time window. Needs further testing/checking.
+ News alert on basket module added. Needs further testing/checking.
+ News blocking mechanism reworked and fixed. Needs further testing.
___________________________________________________________________________________
____________
DBMultiASM(10230)devX201511161356:
Some other minor fixes and features I don't recall right now were added, and new
bugs as well
___________________________________________________________________________________
____________
DBMultiASM(10230)devX201511131601.deploy:
DBMultiASM(10230)devX201511132329.update:
Nothing really new, this is mostly a bug-fix release. I spent most of the time in a
sort of bugs-hunting session.
Among others, I was reviewing the news module and made some changes that I expect
to do better next week.
I have also added a very experimental MTF CSM for both, basket and general purpose,
by the way, Modoki is still the default on both. CSM should be chosen in options
(independent options for basket and general one) and if so, it will be displayed in
place of Modoki, so in this release, both cannot be displayed at the very same
time. If you want both, enable MTF_CSM and load your own Modoki (If you want it and
don't have one yet, it is easy to find by using the paperclip at the top of the
page or you can also find it in the package of the first upload I made)
Mandatory bug-fix update added. Fixed bug reported in #Post 12380 here. Install
fist package first, then overwrite EA with the one in the latest package.
___________________________________________________________________________________
____________
DBMultiASM(10230)devX201511091622:
Sadly, the reported issue related to news (placing orders during the hold after
news time, with the [N]ews header enabled and red [N] in the respective pair row)
is intact, so it needs more testing to try to find what's wrong with it. While
doing a visual review of the code I didn't found anything looking bad yet, BTW I'll
keep an eye on it since I want it to be confident or not to be.
I have also added some toys to try and test if they worth being improved.. like a
GAP alerts counter (needs work and fine tuning yet... I'm thinking on adding a sort
of buffer in time before increasing count and to use as filter like... to place an
order only after N alerts in the same direction... or after a change in GAP
direction is detected or so.. open to ideas).
Another toy to play with is something to allow the dashboard to receive alerts of
external indicators in other charts. To achieve this, the required indicator(s)
should be adapted to allow inter-operation with the dashboard. A good sample
scenario for that would be to import alerts exported from something like MADdash.,
btw, AFAIK, it doesn't export it alerts and it source code is not available to be
adapted. Anyway, it doesn't have to be an MTF indicator (better if it is, of
course.. less chart windows), it can be any indicator on any regular pair chart
window. This feature is immature and still under heavy-development and is not
enabled by default since it needs indicators to be adapted and it stills doesn't
work as a filter to auto-trade yet, it only shows alerts provided by adapted
indicators loaded in other chart windows by now.
The H|D|N boxes at the left of the Currencies/Basket block are only representative
by now and will not show anything in this version.
___________________________________________________________________________________
____________
___________________________________________________________________________________
____________
Potentially hazardous DLL dependencies explained:
• shell32.dll::ShellExecuteW(0,"open",URL,"","",3)
Used to open news URL in default web browser when a pair/currency displays news
alerts.
___________________________________________________________________________________
____________