Professional Documents
Culture Documents
The design and specifications are subject to change without prior notice
for product improvement. Consult with the sales agency or manufacturer
for details.
CR137-RG51F
202055091488 Thank you very much for purchasing our air conditioner.
20150210 Please read this owner's manual carefully before using
your air conditioner.
Remote Controller Specifications
CLEAN
AIR TIMER OFF SWING TIMER OFF
RESET LOCK RESET LOCK
LED LED
DISPLAY TURBO DISPLAY TURBO
1 2
Operation of buttons 1 TEMP UP Button Operation of buttons
Push this button to increase the indoor temper- 6 CLEAN AIR Button(applicable to RG51F3)
ature setting in 1OC increments to 30OC. Disable/Active clean air function. When the
2 TEMP DOWN Button clean air function is initiated, the Ionizer/
Push this button to decrease the indoor temper- Plasma Dust Collector(depending on models)
SET TEMPERATURE( C)
O
ature setting in 1OC increments to 17OC. SET TEMPERATURE( C)
O is energized and will help to remove pollen
AUTO FAN
NOTE Temperature contol is not available AUTO FAN and impurities from the air.
COOL HIGH COOL HIGH
DRY MED in Fan mode. DRY MED
HEAT LOW HEAT LOW
Swing Button(applicable to RG51F1)
3 MODE Button Used to stop or start vertical louver
Press this button to modify the air conditioner movement and set the desired left/right air
TEMP mode in a sequence of following: TEMP
flow direction. The vertical louver changes
2 1 AUTO COOL DRY HEAT FAN 1 2 6 degree in angle for each press.
ON/OFF FAN SPEED
9 ON/OFF FAN SPEED
9
MODE MODE
NOTE Please do not select HEAT mode if the 7 RESET Button
3 10 machine you purchased is cooling only type. 3 10
Once the recessed RESET button is pressed,
4 SWING ECO TIMER ON Heat mode is not supported by the cooling SWING ECO TIMER ON
11 only appliance.
4 11 all of the current settings will be cancelled and
5 CLEAN
AIR RESET LOCK
TIMER OFF 5 SWING TIMER OFF the controller will return to the initial settings.
RESET LOCK
6 12 4 SWING/SWING Button
6 12 8 LED Button
LED LED
7 DISPLAY TURBO
13 Used to stop or start horizontal louver move- DISPLAY TURBO
7 13 Disable/Active indoor screen Display. When
ment or set the desired up/down air flow
8 pushing the button, the indoor screen display
14 direction. The louver changes 6 degree in 14
angle for each press. If keep pushing more
8 is cleared, press it again to light the display.
than 2 seconds, the louver will swing up and 9 ON/OFF Button
down automatically.
Operation starts when this button is pressed
Model: RG51F3/E and stops when the button is pressed again.
5 ECO Button: Model : RG51F1/E
RG51F/E(This model does not Used to enter the energy efficient mode. 10 FAN SPEED Button
have clean air button) Under cooling mode, press this button, the Used to select the fan speed in four steps:
remote controller will adjust the temperature Auto Low Med High
automatically to 24OC, fan speed of Auto to
save energy(but only if the set temperature 11 TIMER ON Button
is less than 24OC). If the set temperature is Press this button to initiate the auto-on
between 24OC and 30OC, press the ECO time sequence. Each press will increase
button, the fan speed will change to Auto, the auto-timed setting in 30 minutes
the set temperature will remain unchanged. increments. When the setting time displays
NOTE: 10.0, each press will increase the auto-
Pressing the TURBO and SLEEP button, timed setting 60 minutes increments.
To cancel the auto-timed program, simply
modifying the mode or adjusting the set
adjust the auto-on time to 0.0.
temperature to less than 24OC will stop
ECO operation.
Under ECO operation, the set temperature
should be 24OC or more. it may result in
insufficient cooling. If you feel uncomfortable,
just press the ECO button again to stop it.
3 4
Indicators on LCD
12 TIMER OFF Button Mode display
Press this button to initiate the auto-off time Information are displayed when
sequence. Each press will increase the auto AUTO COOL DRY
the remote controller is powered
-timed setting in 30 minutes increments. HEAT FAN
up.
SET TEMPERATURE( C)
O When the setting time displays 10.0, each
FAN
press will increase the auto-timed setting Displayed when data transmitted.
AUTO
60 minutes increments. To cancel the auto-
COOL HIGH
AUTO FAN Displayed when remote controller is ON.
DRY MED timed program, simply adjust the auto-off
HEAT LOW
time to 0.0 COOL HIGH
DRY MED
TEMP
TIMER ON Displayed when TIMER ON time is set.
13 LOCK Button HEAT TIMER ON OFF LOW
1 2 Press this recessed button to lock all current TIMER OFF Displayed when TIMER OFF time is set.
9 settings, and the remote controller will not
MODE ON/OFF FAN SPEED Show set temperature or room
10 accept any operation except that of the LOCK.
3 Use the LOCK mode when you want to
temperature, or time under TIMER
SWING ECO TIMER ON setting.
4 11 prevent settings from being changed
5 SWING TIMER OFF
accidentally. Press the LOCK button again to Indicated all the current settings are
RESET LOCK
cancel the LOCK function. A lock symbol locked
6 LED
12 will appear on the remote controller display
DISPLAY TURBO
13 when the lock function is activated. Fan speed indication
7
HIGH High speed
8 14 14 TURBO Button
MED Medium speed
Active/Disable Turbo function. Turbo
function enables the unit to reach the preset LOW Low speed
temperature at cooling or heating operation
in the shortest time(if the indoor unit does NO display Auto fan speed
RG51F1/E
not support this function, there is no
corresponding operation happened when Note:
pressing this button.) All indicators shown in the figure are for the purpose
of clear presentation. But during the actual operation
NOTE: only the relative functional signs are shown on the
display window.
Buttons design is based on typical model
and might be slightly different from the
actual one you purchased the actual
shape shall prevail.
All the functions described are
accomplished by the unit. If the unit has no
this feature, there is no corresponding
operation happened when press the relative
button on the remote controller.
When there are wide differences between
,, ,,
,, Remote controller,,Illustration and
USER'S MANUAL on function description,
the description of
,, USER'S MANUAL,,
shall prevail.
5 6
How to use the buttons
How to use the buttons
Auto operation Dehumidifying operation
Ensure the unit is plugged in and power is
Ensure the unit is plugged in and power is available. The OPERATION indicator on the
O
SET TEMPERATURE( C) available. The OPERATION indicator on the display panel of the indoor unit starts flashing.
AUTO FAN display panel of the indoor unit starts flashing. SET TEMPERATURE( C)
O
7 8
7
Timer operation
Press the TIMER ON button can set the auto-on ! CAUTION
time of the unit. Press the TIMER OFF button The effective operation time set by the remote controller for the timer function
can set the auto-off time of the unit. is limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0,
SET TEMPERATURE( C)
O
5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12, 13, 14, 15,16,17, 18, 19, 20,
AUTO FAN To set the Auto-on time. 21, 22, 23 and 24.
COOL HIGH
DRY MED 1. Press the TIMER ON button. The remote
HEAT LOW controller shows TIMER ON, the last Auto-on
setting time and the signal "H" will be shown on
TEMP the LCD display area. Now it is ready to reset
the Auto-on time to START the operation.
2. Push the TIMER ON button again to set desired
MODE ON/OFF FAN SPEED
Auto-on time. Each time you press the button, Example of timer setting
the time increases by half an hour between 0
SWING ECO TIMER ON
and 10 hours and by one hour between 10 and TIMER ON
1 (Auto-on Operation)
TIMER OFF 24 hours.
RESET LOCK
2 3. After setting the TIMER ON ,there will be a one The TIMER ON feature is useful when you want
LED
h the unit to turn on automatically before you return
DISPLAY TURBO second delay before the remote controller
transmits the signal to the air conditioner. Then, TIMER ON home. The air conditioner will automatically start
after approximately another 2 seconds, the operating at the set time.
signal "h" will disappear and the set temperature
Start
will re-appear on the LCD display window.
Off Example:
To start the air conditioner in 6 hours.
Set 6 hours later
To set the Auto-off time. 1. Press the TIMER ON button, the last setting
of starting operation time and the signal "h "
1. Press the TIMER OFF button. The remote
controller shows TIMER OFF, the last Auto-off will show on the display area.
setting time and the signal "H" will be shown on 2. Press the TIMER ON button to display "6.0h "
the LCD display area. Now it is ready to reset on the TIMER ON display of the remote
the Auto-off time to stop the operation. controller.
2. Push the TIMER OFF button again to set 3. Wait for 3 seconds and the digital display
desired Auto-off time. Each time you press the area will show the temperature again. The
button, the time increases by half an hour "TIMER ON" indicator remains on and this
between 0 and 10 hours and by one hour function is activated.
between 10 and 24 hours.
3. After setting the TIMER OFF ,there will be a
one second delay before the remote controller
transmits the signal to the air conditioner. Then,
after approximately another 2 seconds, the
signal "H " will disappear and the set temperature
will re-appear on the LCD display window.
9 10
TIMER ON TIMER OFF
TIMER OFF
(Off Start Stop operation)
(Auto-off Operation)
h This feature is useful when you want to start
The TIMER OFF feature is useful when you want the
TIMER OFF unit to turn off automatically after you go to bed. The h the air conditioner before you wake up and
stop it after you leave the house.
air conditioner will stop automatically at the set time. TIMER ON OFF
Example:
Example: To start the air conditioner 2 hours after setting,
To stop the air conditioner in 10 hours. and stop it 5 hours after setting.
Stop 1. Press the TIMER OFF button, the last setting of 1. Press the TIMER ON button.
stopping operation time and the signal "h " will 2. Press the TIMER ON button again to display
On 2.0H on the TIMER ON display.
show on the display area.
Set 10 hours later 2. Press the TIMER OFF button to display "10h " on 3. Press the TIMER OFF button.
Start
the TIMER OFF display of the remote controller. 4. Press the TIMER OFF button again to display
3. Wait for 3 seconds and the digital display area Off Stop 5.0H on the TIMER OFF display .
5. Wait for 3 seconds and the digital display area
will show the temperature again. The "TIMER
will show the temperature again. The "TIMER
OFF" indicator remains on and this function is
Set 2 hours later 5 hours later ON OFF" indicator remains on and this function
activated. after setting after setting is activated.
COMBINED TIMER
(Setting both ON and OFF timers simultaneously)
h TIMER OFF TIMER ON
TIMER ON OFF (On Stop Start operation)
This feature is useful when you want to stop the air
conditioner after you go to bed, and start it again in
the morning when you wake up or when you return
home.
Start Example:
Stop To stop the air conditioner 2 hours after setting and
On start it again 10 hours after setting.
Set 2 hours later 10 hours later 1. Press the TIMER OFF button.
after setting after setting
2. Press the TIMER OFF button again to display
2.0H on the TIMER OFF display.
3. Press the TIMER ON button.
4. Press the TIMER ON button again to display 10H
on the TIMER ON display .
5. Wait for 3 seconds and the digital display area
will show the temperature again. The "TIMER
ON OFF" indicator remains on and this function is
activated.
11 12
11 12
Handling the remote controller Replacing batteries
The following cases signify exhausted batteries.
Replace old batteries with new ones.
Location of the remote controller. Receiving beep is not emitted when a signal
is transmitted.
Use the remote controller within a distance of 8 Indicator fades away.
meters from the appliance, pointing it towards the
8m
receiver. Reception is confirmed by a beep. The remote controller is powed by two dry
COO
DRY L
HEA
T
AUT
O
SET
TEM
PER
ATU
RE(
)
FAN
batteries (R03/LR03X2) housed in the back rear
CAUTIONS part and protected by a cover.
HIG
MED H
TEM LOW
P
MO
DE
DIRE AIR
ON
/OF
CTIO F
N FAN
SLE SPE
EP ED
13 14