Professional Documents
Culture Documents
Owner’s Manual
This Manual has been prepared for owner’s reference to vehicle’s
performance, safety, maintenance and everyday use guidelines.
Keeping the manual in your car is recommended for quick reference.
In The Name of God
OWNER’S MANUAL
DONG FENG (H30 CROSS - S30)
DEAR BUYER
We're thankful for choosing Iran Khodro product and we congratulate you for this good selection. We hope this new vehicle
contributes in happy moments of your life.
This manual helps you enjoy driving. Therefore to have an easy access, it would be advisable to be kept in your glove compartment.
The manual is divided into some sections for your convenience, and deals with various aspects of driving or maintenance of the car.
Before driving: Includes seat adjustment, Safety belts, heating and ventilation control system and also every other thing you
needed to know in order to settle comfortably.
Driving Controls: explain functions of switches, equipment and precautions.
Maintenance: Includes information about the checks you should carry out regularly.
Note:
Please refer to maintenance and guaranty services manual to know about the vehicle maintenance, regulation &
condition of guaranty services and periodic services.
Technical emergencies: Help solve some of unavoidable small emergencies occurring occasionally like replacing lamps fuses or changing wheels.
Technical data: It includes some information about engine, dimensions, capacities and weights.
WARNING, CAUTION and NOTE have special meanings. These special meanings apply except when laws or regulations require
that the signal words be used with a different meaning. Pay special attention to the messages highlighted by these signal words:
In the meanwhile consumptive material must be provided through authenticated representatives of IKCO.
NOTE: Indicates a serious damage to your vehicle in the case of not paying attention to the warning and caution signals.
Important Point: The specification of each vehicle will vary according to its type. Therefore some information of this manual may
not be true about your vehicle. For any more information, you can consult with IRAN KHODRO dealers.
Reminder: Information about other varieties of this product have been mentioned in this manual and denoted by asterisk (*).
2
INDEX
DRIVING 2
VEHICLE EQUIPMENT 3
MAINTENANCE 4
OPERATIONAL RECOMMENDATIONS 5
TECHNICAL CHARACTERISTICS 6
INDEX 7
3
OVERVIEW
*If equipped
4
YOUR VEHICLE AT A GLANCE
Foreword
The pictures, data and relevant notes in the user’s manual conform to the definition of product upon preparation of the manual.
IKCO is continuously dedicated to improving the appearance, interior trims and technical specifications of the vehicle. The pictures,
data and relevant notes in this manual are inapplicable as basis for order acceptance.
Applicable models of this manual:
5
YOUR VEHICLE AT A GLANCE
This manual is mainly prepared to introduce the models in above-mentioned series; therefore, some equipment and functions may
not be provided on your vehicle.
The “*” mark in this manual means that the provision of the marked equipment/function is dependent on your model.
The legends in this manual are for operation introduction only and the pictures for S30 sedan (equipped with DFM A16 engine,
automatic & manual transmission, automatic A/C and MP5 audio system etc.) shall prevail if common to three models.
Your Dongfeng car is installed with various advanced automotive electronic control units and can only be maintained and serviced
either by the Dongfeng Franchise Store; or IKCO authorised representatives;otherwise, your car may lose the technical and quality
guarantee.
IKCO Company reserves the right to modify the model, equipment or equipment function, without prior notice.
6
YOUR VEHICLE AT A GLANCE
Due to the specifi cations and options of your new car as well as different purchase time, some equipment/functions described
in this manual may not be provided or not be refl ected in time on your new car.
7
YOUR VEHICLE AT A GLANCE
Warning Notices
1. Please always read this manual 6. Inspection before driving: overheating of engine;
carefully and follow the operation modes • Inspect the lamps for normal operation; • Inspect the battery condition (see Page
herein before and during your driving, • Inspect the windshield and rearview 143).
so as to make yourself familiar with mirror for cleanliness, and the wiper for 7. Inspect all warning lamps before the
the vehicle operation and maintenance normal operation; engine start (with ignition switch at M
and contribute to your driving safety; or • Inspect the position of rearview mirror; position) (see Page 81).
else, the vehicle will be used improperly • Inspect the tyre pressure and wear 8. Engine running:
and we will not be responsible for the condition. The tyre condition directly • Do not run the engine in enclosed depot
resultant losses. influences the dynamic performance, to avoid poisoning by exhaust gas;
2. Please always have your vehicle economy and ride comfort of the vehicle, • Do not start the engine when the
maintained regularly at either Dongfeng especially the driving safety. battery is under charge, because the
Franchise Store or IKCO authorised Therefore, please use and maintain the engine electronic control unit and the
representatives as per the Warranty tyre (including the spare wheel) properly starter cannot operate normally at this
Manual. as per the relevant regulation. Inspect moment;
3. To accommodate to the drivers in the tyre pressure when the tyre is cold • It is not necessary to depress the
different shapes, make the following (see Pages 153-155); accelerator pedal when starting the
adjustments to the driving position: • Inspect the level of such fluids as engine;
• Headrest height, fore-and-aft position, engine oil, brake fluid, power steering • After high-speed driving, run the engine
backrest inclination, cushion height*; fluid and coolant (see Pages 123-127): at an idle speed for 3-5 min, and then
• Position of steering wheel; - Inspect the oil level 10 min after the turn off the ignition switch.
• Height of safety belt. engine is stopped; 9. Fuel cut-off device (see Page 19).
4. Safety belt is an important guarantee - Inspect the coolant level when the
10. Braking:
for occupant’s safety. Children and engine is cold;
• When the engine is shut down, the
adults at different ages shall wear safety - Do bleeding before adding a great
belt or apply other security devices by quantity of coolant (when there is vacuum booster will not work and
the method fitting their body. no coolant in the expansion tank) or the brake efficiency will decrease
5. The airbag will be effective only when changing coolant, as air, if any, in the substantially due to the considerable
the safety belt is wore. cooling system may result in local increase of brake pedal force; therefore,
8
YOUR VEHICLE AT A GLANCE
it is strictly prohibited to coast the vehicle or IKCO authorised representatives invasion, and pay special attention to
when the engine is shut down; when necessary (see Pages 62-63). film application on the front windshield,
• Before leaving the vehicle, apply the 12. Electrical accessories: wet umbrella and water cup, etc.;
parking brake and confirm that it works For any added electrical accessory, otherwise, the instrument and electric
reliably. For vehicle with automatic the wiring operation shall be performed appliances may be damaged.
transmission or automatic & manual either by Dongfeng Franchise Store or 16. Do not retrofit the vehicle, or else,
transmission, set the shift lever to P gear IKCO authorised representatives as its performance, safety or durability may
at the same time (see Pages 87-92); per the connecting positions and wiring be influenced, and relevant rules and
• In the course of emergency braking or method. regulations may be broken. Furthermore,
braking on a wet or slippery road, the 13. It is strictly forbidden to use leaded the damage or performance issues
ABS can inhibit the wheel from locking, gasoline to avoid damaging the three- resulting from such retrofitting operation
contributing to the reliability of the driving way catalytic converter installed on the is out of the scope of quality guarantee.
direction. However, prudent and safe vehicle (see Pages 20-21).
driving is still a must (see Pages 93-94). 14. Safety tips:
11. If any red warning lamp (such as Follow the following critical driving rules
for charging, braking, engine oil, water to contribute to the safety of yourself and
temperature etc.) on the instrument passengers throughout the driving!
panel is on during driving, stop the • Strictly abide by the traffic rules to drive
vehicle safely as soon as possible the vehicle safely;
and check it as per this manual. If it is • Do not drive the vehicle after drunken
necessary, contact either Dongfeng or drugged;
Franchise Store or IKCO authorised • Make sure to observe the speed limit
representatives. marks and do not overspeed;
If any yellow warning lamp on the • Make sure to apply the safety belt and
instrument panel is on during driving, corresponding child restraints and let
check the vehicle as per this manual and the children take the rear seats.
contact either Dongfeng Franchise Store 15. Protect the dashboard against water
9
YOUR VEHICLE AT A GLANCE
Traction ............................. 62
Braking ............................................. 97
Tyre pressure ................................. 131
Wheel replacement ........................ 147
10
YOUR VEHICLE AT A GLANCE
Traction ............................. 62
11
YOUR VEHICLE AT A GLANCE
12
YOUR VEHICLE AT A GLANCE
Airbag ............................................... 35
13
YOUR VEHICLE AT A GLANCE
14
1 YOUR VEHICLE AT A GLANCE
15
REMOTE CONTROLLER
1
Note :
Ensure that all doors and the trunk lid are
properly closed when using the remote
controller for locking.
After the remote controller sends a locking
signal, the locking will fail if any one of doors
or the trunk lid is left open or virtually closed.
Continuous and repeated locking/unlocking
operations with remote controller will make
the central control system inoperative in short
time, which is normal because the motor is
Remote controller Remote-controlled electric central being protected. However, please do not
The remote controller is confi gured in locking operate like that.
the master control key handle. Use the remote controller to unlock/lock
The remote controller, with a doors and the trunk lid with as locking
Searching function in parking lot
In parking lot or underground garage,
highfrequency transmitter, embraces the button and as unlocking button. The
when all doors are locked, after the
following advantages: operation is indicated by fl ashing of turn
locking button on the remote
- Accessible for a range more than 6m signal indicator lamp.
controller is pressed down twice (with
around the vehicle. Unlocking: The turn signal lamp fl ashes
an interval of 1-3s), the horn will sound
Note: Have either Dongfeng for 3 times.
for 5 times and all turn signal lamps will
Franchise Store or IKCO authorised Locking: The turn signal lamp is on for
fl ash for 15s approximately to facilitate
representatives correct the fault, if any. 2 s, and the remote controller will be
you fi nd out your own vehicle quickly
inoperative when the ignition switch is in
by following those audible and visual
ON position.
indications, which, however, can be
Automatic locking restoring: If no door
terminated by pressing down the locking
(incl. trunk lid) is opened 20 s after
button again when the searching
unlocking by remote controller, all door
function is activated.
locks will be locked again automatically.
16
REMOTE CONTROLLER
17
KEY
1
NOTE :
If the door (incl. trunk lid) is left open or not
properly closed, the electric central locking
cannot function. And in this case, only the
door at the driver’s side may be locked, with
other doors left unlocked.
Before leaving the vehicle: The key can be used to connect the NOTE :
- Close all door windows and do not ignition switch as well as open and lock When the battery runs out, only the door
leave valuable matters in the vehicle. the door and fuel tank cap individually. at the driver’s side will be unlocked/locked,
- Remove the ignition key, turn the with other doors inactive.
steering wheel to lock it and close all Electric central locking
doors. All doors and the trunk lid can be
Each vehicle is provided with two unlocked or locked at the same time by
keys. One is the electronic anti-theft inserting the key into the lock hole at
starting master control key with remote driver’s side, but the turn signal lamp will
controller, and the other is that without not be lighted in this case.
remote controller.
Make the key prop out by pressing
down the button , and press down the
button before folding the key.
18
KEY
1
NOTE :
Do not change the circuit of electronic anti-
theft starting device in no case, or else, the
vehicle will fail to be started.
19
DOOR OPENING/CLOSING
Opening the door outside Opening the door inside Locking/unlocking doors inside
Press down the unlocking button on the Opening the driver’s door from inside will Close all doors, press down the locking
remote controller or insert the key into unlock the central locking mechanism button on the armrest at the left side
the left front door lock hole to unlock when it is locked. of driver to lock doors and then the
the four doors and the trunk lid, and The inside handles for another three unlocking button to unlock doors.
then open the doors by the outside door doors can only be used to open the door
handle or the trunk lid by the trunk lid inside.
switch.
20
CHILD SAFETY LOCK AND TRUNK LID (LIFTGATE)
Child safety latch Trunk lid (liftgate) Spare opening mode for trunk lid
The child safety lock is designed for There is one opening switch in the (liftgate)
preventing the child on the rear seat from release handle of trunk lid. To open the When the central locking mechanism is
faulty or powers off, the spare mode can
opening the door inside accidentally. trunk lid, unlock it, touch the opening
be applied to open the trunk lid (liftgate).
Each rear door is designed with a child switch and lift the handle up.
Lay down the rear seat backrest and
safety latch. Use the key to rotate the To close the trunk lid, grip and pull the access to the trunk lid lock inside. Then
red locking switch on the rear door trunk lid edge downwards to 3/4 of its insert a small and long metal bar into
frame to the locking position; after the stroke, put your hands on the upper the spare mode activation hole above
door is closed, the child safety latch will surface of the trunk lid and press it down the lock body and toggle the lock hole
function, and the door cannot be opened to the limit. rightwards (to the left side of vehicle) for
whether the vehicle is unlocked or not. unlocking.
To open the latched door, unlock the
vehicle and then open the door outside.
The notch will be vertical when the child NOTE : When closing the S30 trunk lid, pay attention not to make the hinge bracket held down
by the luggage; when closing the H30 and H30 CROSS liftgate, be careful not to make the liftgate
safety lock is not in service.
glass held down by the luggage; after closing, check whether the trunk lid and liftgate are closed
exactly. Never leave the trunk lid and liftgate open during driving.
21
ENGINE HOOD OPENING/CLOSING
NOTE :
Do not lay down the engine hood forcibly
but release it after it is placed to 3/4 of
Opening the engine hood Strut
its stroke.
Pull outwards the black handle at the Put the strut in place after opening
left lower part of the instrument panel, the engine hood. There is only one
unlock the inside lock of the engine hood supporting position for the strut, as
and turn the safety hook handle at the shown above.
middle of the engine hood to the left to
open the engine hood.
NOTE :
NOTE : Confirm that the strut top has been
Only when the vehicle is stopped can seated into the supporting hole of the
the inside handle of the engine hood be engine hood.Do not open the engine
pulled. hood against strong wind.
22
REFUELING/ FUEL CUTOFF DEVICE
Fuel type
The label affixed on the fuel tank cap 1
states the allowable fuel type.
Lead-free gasoline of 93# or above
NOTE :
Warning When the fuel added is inconsistent with Warning
Do not press the left white venting valve your engine system, before starting the Before resuming the fuel circuit, check
in the fuel filler during refilling, to prevent engine, always drain out the fuel tank and the engine compartment for fuel leakage
the gasoline from entering the venting clean the pipes, and then add appropriate or odors and perform troubleshooting if
pipe and causing fuel leakage. fuel again. necessary.
23
THREE-WAY CATALYTIC CONVERTER
The three-way catalytic converter helps - Collision, water pouring and immersion
to substantially reduce the hazardous must be avoided, orelse, the
matters contained in the engine exhaust purification effect of converter will be
gas, contributing to the environmental weakened considerably;
protection. - It is unallowable to use the fuel additives
Observe the following rules when not approved by our company;
using - It is unallowable to use the engine
the three-way catalytic converter: oil additives not approved by our
- Qualified lead-free gasoline must be company;
used, since the lead in the gasoline - The service life of the converter
after combustion will, together with the is closely related with the engine
exhaust gas, settle on the converter operation situation. Therefore, please
surface when being discharged, do regular maintenance on the vehicle
causing the converter ineffective earlier and have it repaired immediately if
and the oxygen sensor ineffective due necessary.
to lead poisoning;
24
THREE-WAY CATALYTIC CONVERTER
25
RUNNING-IN PERIOD
26
FRONT SEAT
Headrest
adjustment
Backrest inclination
adjustment
Fore-and-aft
adjustment
27
FRONT SEAT
Fore-and-aft adjustment
Note: Lift up the control handle to
Do not press the headrest downwards adjust the seat to desired
directly without pressing down the position. Then release the
adjusting button, or else, the headrest handle and swing the seat
adjustment mechanism will be damaged.
back and forth twice, until the locking
mechanism is confirmed to be locked
and the seat cannot be moved. The fore-
andaft adjustment range is 220mm at
the most.
28
REAR HEADREST
29
REAR SEAT (S30)
Rear seat Rear seat cushion tilting With rear seat cushion tilted
The rear seat backrest is of one-piece The seat cushion is tiltable. Lift up the
and equipped with two headrests. It can rear seat cushion front and back
be folded frontwards as a whole. gently in sequence to tilt the cushion
towards the front seat backrest.
Rear seat centre armrest*
The middle part of the rear seat backrest
can be lowered down as the center
armrest with two cup holders.
Note:
Note: After resetting the cushion to the normal
The cup placed into the cup holder shall position, pull out the four buckles of the
be covered with sealing cap. safety belt and put them on the cushion.
30
REAR SEAT (S30)
Rear seat full-folding Press the buckle of lower anchorage of After folding the rear seat, the cabin
Tilt the rear seat cushion and take off the the middle seat belt to detach the latch is connected with trunk, enlarging the
rear headrest. plate of belt, and make the belt retracted space.
fully. Then move the side belt to two
sides. Afterwards, lift up the two pull
buttons on the rear seat backrest and tilt
the backrest backwards, then the rear Note:
seat can be folded. When resetting the rear seat backrest,
always place the side belt at two sides
smoothly, pull out the middle seat belt
and insert the lower latch plate into the
corresponding buckle. After restoring
the backrest to the normal position,
it is a must to check that it has been
Note:
locked reliably, or else, the articles in
It is not allowed to fold the rear seat
the trunk may enter into the passenger
before the cushion is tilted, so as to
compartment and hurt passengers in
avoid the detachment of support at the
case of emergency braking or collision.
lower part of backrest.
31
REAR SEAT (H30, H30 CROSS)
Backrest resetting
1 Place the seat belt at two sides and
push the seat backrest upwards until it
is locked reliably.
Note:
When resetting the rear seat backrest, always
place the side belt at two sides smoothly, pull
out the middle seat belt and insert the lower
latch plate into the corresponding buckle. After
restoring the backrest to the normal position, it
is a must to check that the backrest has been
locked reliably, or else, the articles in the trunk
Backrest folding There is one button at the left top and may enter into the passenger compartment and
The 6/4 split-type seat backrest can be right top of the backrest respectively. hurt passengers in case of emergency braking
or collision.
partially or wholly folded according to Detach the latch plate of the middle seat
the actual requirements. belt, fully retract the belt and push the
side belt aside. Press down the button
forcibly to fold the backrest forwards.
32
STEERING WHEEL POSITION ADJUSTMENT
1
Warning:
It is prohibited to adjust the steering
wheel position during driving.
33
DRIVING POSITION
Illustrated driving position: Backrest inclination height to make it not obstruct the
Correct Adjust the backrest to enable the instrument observation.
Incorrect (too close) driver’s back to lean against the seat
Incorrect (too far) in whole height comfortably. To ensure Safety belt adjustment (see Page 44)
Recommendations on adjustment of the effectiveness of safety belt, do not Fasten the safety belt and make it pass
driving position incline the backrest excessively. through the middle part of the shoulder
Seat adjustment (see Page 22) Headrest: To give full play to its safety width.
Fore-and-aft position: protection, the headrest shall be as Position the footrest mat at the driver’s
– Adjust the seat for the purpose of close to the head top as possible. side correctly and prevent it from sliding;
depressing the clutch pedal to the limit do not stack up two layers of liners to
comfortably. Steering wheel position adjustment avoid interfering the pedal operation.
– Keep the body in driving state, with the (Page 29)
right foot depressing the accelerator Adjust the steering wheel as follows:
pedal and the left foot on the footrest. grip the steering wheel with two hands
– The buttocks is supported by the seat at the 9 o’clock and 3 o’clock positions Warning:
cushion completely. respectively as well as the arm bending It is prohibited to adjust the seat during
driving.
slightly, and adjust the steering wheel
34
AIRBAG
35
AIRBAG
Warning:
Danger:
When the airbag inflates, some parts of
It is prohibited to apply child seat on the
the airbag system will get hot. Do not
front passenger seat to avoid injury.
touch them to avoid scalding.
36
AIRBAG
Front airbag – basic knowledge 2. The front airbag will not inflate in
1. Inflating conditions: the following traffic accidents: 1
The airbag inflating command will be – Rear-end collision;
sent when the vehicle collision angle and – Vehicle side turn or rollover;
intensity detected by the deceleration – Front collision with such cylindrical
sensor satisfy the inflating condition, objects as telegraph pole or trees;
which is supported by the following three – Entering under the container wagon or
conditions: large vehicle;
– The power is on. If the vehicle is – Collision with guardrail or other
powered off, the airbag inflating vehicles in left/right front;
command will fail to be generated and – Colliding the rear end of other vehicles
sent; in front;
– The vehicle collision direction is in – Collision after the front airbag has
line with the direction of deceleration been activated once;
detected by sensor; – The front airbag system was technically
– The deceleration detected by sensor damaged during the previous repair.
meets the inflating condition.
Note:
The national certified collision test
conditions are that the front airbag will
deploy when the vehicle at the speed of
50km/h collides with a non-deformable
and irremovable obstacle.
37
AIRBAG
Collision with guardrail or other Collision after the front airbag has
vehicles in left / right front been activated once
Rear-end collision
38
AIRBAG
39
AIRBAG
40
SAFETY BELT
Note:
Before each driving, wear the safety belt
well even in urban traffic.
This regulation applies to the rear seat
as well.
Whether the safety belt motion (including
smooth extraction, quick locking by
pulling, reliable buckle release/clipping
and others) is correct or not means a lot
to its protection effect.
41
SAFETY BELT
42
SAFETY BELT
43
SAFETY BELT
Misunderstandings on application of Why the safety belt shall be fastened Why the safety belt shall be fastened
1 safety belt since the vehicle has been provided if I can drive the vehicle safely?
Will you be tripped in the car if the with airbag? In case of traffic accidents even not due
safety belt is fastened? Airbag is just a supplementary system to your fault, you and your passengers
You will not be tripped in the vehicle and can only works in combination with will be injured. Even though you can
regardless of the fastening of safety belt. the safety belt instead of as a substitute. drive the vehicle safely, your safety still
If the safety belt is fastened, you have The operation of airbag system requires cannot be secured when coming across
higher opportunity to keep sober after that the safety belt must be used. Even if the accidents out of your control, which is
accident compared with the situation you take a vehicle equipped with airbag, similar to unsafe driving. So, occupants
without fastening the safety belt, and the safety belt buckle shall be clipped to shall apply the safety belt at any time.
you can release the safety belt buckle obtain reliable safety protection, which
and leave the vehicle. means a lot for front collision and means
more for side collision or other kinds of
collisions.
44
SAFETY BELT
position is taken.
- Always put your feet on the footrest 1
space during driving instead of on
instrument panel or seat cushion in
any case.
45
SAFETY BELT
46
SAFETY BELT
5. Pull the safety belt latch plate end The lap belt should be fastened a little Safety belt height adjustment
downwards and the shoulder belt bit low and just in contact with the thigh. The front passenger can adjust
upwards at the same time to tension the Therefore, in case of collision, the force the height of safety belt anchorage
lap belt. will be exerted on the relatively sturdy according to his/her body shape. There
pelvis and keep the body from sliding are five types of positioning height for
the upper anchorage of safety belt.
down to the part below the lap belt. If
Move the anchorage directly to raise it.
your body slides down below the lap
For lowering it down, press down the
belt, you will be injured seriously or even locking button to make the safety
killed. The shoulder belt should pass belt upper pivot slide to the appropriate
through the shoulder and cross over the position and then release the button.
chest, since it is the most ideal part to And then, push the upper pivot up and
bear the restraint force of the safety belt. down to confi rm for locking or not.
Note:
During emergency braking, vehicle
collision or quick safety belt pulling, Warning:
the safety belt may be seized during The front passenger should adjust the
extension. Retract the safety belt a little safety belt only when the vehicle is
bit to reset it for normal extraction. stopped.
47
SAFETY BELT
48
SAFETY BELT
The safety belt cannot function for The seating position is too far away from The shoulder belt should not pass
protection if the shoulder belt is too the safety belt latch plate. through under the arm but above the
loose. shoulder in any cases.
Warning:
If the safety belt is fastened too loosely, Warning: Warning:
you may be injured seriously, since you If the position of the safety belt latch If the safety belt passes through under
may move forward substantially in case plate is incorrect as shown, you may the arm, you may be injured seriously,
of vehicle collision, aggravating the be injured seriously, since the safety since your body may move forwards a
injury. belt may move upwards to your belly lot during vehicle collision, increasing
The shoulder belt should fit closely during the vehicle collision, thus making the possibility of head and neck injury
against your middle shoulder. The its force applied on the waist instead of and making most of safety belt force
safety belt is so designed that it can be pelvis and causing serious internal injury applied on the rib. After all, the rib is not
automatically locked during emergency as well. Therefore, the safety belt latch as sturdy as the scapula. Besides, your
braking and traffic accident, preventing plate shall be as close to your body as internal organs such as liver and spleen
you from any injury. possible. may get hurt.
49
SAFETY BELT
1
Warning:
It is dangerous for you to lean against
the inclined seat backrest during driving,
because the safety belt, even fastened
to keep the body, will fail to function if
you lie obliquely.
The shoulder belt cannot function as well
since it does not fit against your upper
body but the front part. If the collision
happened, your body will slide into the
The safety belt should not be twisted when Do not fully incline the seat backrest safety belt, making your neck hinged or
passing through the body. during driving. causing other injuries.
Therefore, you may be seriously injured
or even killed.
The lap belt does not function at all in
this case. If the collision happened, the
lap belt may slide over your belly and
exert force on the belly instead of pelvis,
causing serious internal injury.
The seat backrest must be vertical
Warning: during driving to functi o n for protection.
You may be seriously injured if thesafety The whole back should lean against the
belt is twisted, since the twisted belt backrest and the safety belt should be
cannot bear your impact in the whole fastened correctly.
width during vehicle collision.
If so, smoothen the safety belt to make
it work correctly. If the safety belt cannot
be smoothened, contact either Dongfeng
Franchise Store or IKCO authorised
representatives.
50
SAFETY BELT
51
SAFETY BELT
1
Warning:
Never fasten the safety belt as shown!
The child as shown takes a seat
provided with lap-shoulder belt but with
the shoulder belt located at the back of
shoulder. In this case, during the vehicle
collision, the child may slide under the
safety belt to make the action force
just exerted on the child belly, possibly
causing serious casualties.
The lap belt should be fastened as low
as possible, fit closely against the hip
and just approach the thigh, regardless
of the seating position of the child. In this
way, the action force can be transferred
to the child’s pelvis in case of vehicle
collision.
52
CHILD SAFETY
When a child takes the vehicle - Do not leave the child alone in the without child restraints. But the safety
To ensure safety, please understand and vehicle exposed to the sun. belt is still a must. 1
consider the following requirements: - Ensure that there is no danger and Child should be placed on the rear
- The child must take the safety seat. watch out the traffic before opening seat:
- The child lighter than 9kg shall be the door. The vehicle collision statistics prove that
seated with “back towards the driving - Take off the key and apply the parking it is much safer to place the child on the
direction”. It is recommended to apply brake before leaving the vehicle. rear seat instead of front seat regardless
this seating manner for a long period - Do not leave the key on the vehicle, of the age and height.
(until the child is 2-3 years old). since the child may start the vehicle During vehicle collision or emergency
Safest seating position for children: with the key by accident, and thus braking, the child on the rear seat is
Rear seat. Even if a rearward child seat causing dangers. The key may also be unlikely to be injured by the hard articles
is equipped, you shall make the child locked in the vehicle by accidentally inside and the inflated airbag.
take a rear seat. pressing down the remote controller
- Do not make the child sit on the knees or the central locking button, making
of the front passenger in any cases you unable to open the door outside.
Warning:
(since the child may be thrown to the The body structure of a child is
It is prohibited to place child seat on the
instrument panel or windshield in case different from that of an adult: the front seat, or else, serious casualties
of vehicle collision). head-body specific gravity of child is may be caused.
- Do not make the child stay at the position different from that of the adult before the
between two front seats to avoid being child becomes 7-8 years old. During the
thrown out during emergency braking sudden deceleration or violent vehicle
or vehicle collision. collision, serious cervical trauma may be
- Both rear doors are equipped with the caused for children since their muscle
“child safety latch”. If the function is on the neck is relatively weak and the
activated, only after unlocking the bones are fragile.
central locking can the rear door be Only the child up to 10 years old or
opened outside. 1.35m high can be seated in the vehicle
53
CHILD SAFETY
ISO FIX child safety seat anchorage After adjusting the rear seat headrest On H30 and H30 CROSS models, the
On S30 model, the child seat upper height, have the top strap of the child child seat anchorage supports are
anchorage supports are located on safety seat threaded through the middle located at the back of the rear seat
two sides of the rear shelf; four lower part between two support legs of the backrest; four lower anchorage supports
rear headrest and hook it firmly to the are provided for child seat under the ISO
anchorage supports for child seat are
anchorage supports; then tension the FIX mark on the rear seat backrest.
provided under the ISO FIX mark on the Unlock the rear seat backrest, turn over
top strap and secure the child safety
rear seat backrest. the backrest appropriately and adjust
seat.
The anchorage support is used to install Adjust the rear seat headrest to the the headrest height; have the top strap
the top strap of the child safety seat. lowest position. of the child safety seat threaded through
the middle part between two support
legs of the headrest and hook it firmly
Warning: to the anchorage supports; afterwards,
After installation, push the child seat to push the rear seat backrest back to the
different directions to confirm that it is original position and confirm that it is
firmly secured. The anchorage can only locked securely. Tension the top strap
stand the load produced by the correctly and secure the child safety seat.
installed child seat and cannot be used Adjust the rear seat headrest to the
Flip up the anchorage support cover
to secure other objects. lowest position.
backwards to expose the support.
54
CHILD SAFETY
We recommend to apply the child safety Child of 1-3 years old Child of 1-10 years old
seat suitable for securing by safety belt, L2 type seat: Secure it with the 2/3-point L5 type seat: Secure it on the rear seat
so as to ensure the child’s safety to the belt. with the three-point belt. The backrest
largest extent. Child of 3-10 years old height and width as well as the cushion
Always strictly observe the installation L3 type seat: Secure it with the length should be adjusted according to
requirements specified in the operation threepoint belt. The backrest height the age and shape of the child.
instructions prepared by the child seat and width as well as the cushion length To ensure the safety of infants (9-
manufacturer. should be adjusted according to the age 18kg), we recommend you to apply the
Newborn to child of one year old and body shape of the child. protective guard.
L1 type seat: Install it with the back L4 type seat: Secure it with the
towards the driving direction via a threepoint belt. Only the height should
Warning:
threepoint belt. be adjusted for child up to or older than
The child is vulnerable to serious injury
6 years old (about 22 kg). during traffic accident due to no restraint
or improper restraint. Therefore, it is
required to install and use the child seat
according to the relevant requirements
specified in the operation instructions of
the manufacturer.
55
CHILD SAFETY
Warning:
Never hold the infant in your arm
during driving. The weight of the
infant before vehicle collision is
light, however its inertia mass may
increase substantially so that you
Warning: cannot hold it firmly any more. For
Do not let several persons share instance, a 5.5kg infant may turns to
the same safety belt. The impact be 110kg and exert gravity on your
of the adult during accident may be arms during a vehicle collision at a
transferred to the child, thus causing speed 40km/h. The infant is hard
serious injury. to be hold firmly at this moment.
Do not make the child sit on the Always keep the infant in the child
adult’s knees. restraints.
56
SAFETY BELT MAINTENANCE
57
DOOR WINDOW REGULATION
59
DASHBOARD
60
COMBINATION INSTRUMENT
1
Vehicle running indicator Vehicle running indicator
Tachometer lamp, warning lamp Speedometer lamp, warning lamp
(Page 59) (Pages 61-63) (Page 59) (Pages 61-63)
Selector button for odometer, Combination display Fuel gauge Water thermometer
trip meter and instrument panel Minimum fuel level warning
luminance adjustment function (Pages 64-67) High water temperature
(Pages 64-67) lamp (Pages 60 and 63) warning lamp (Page 60)
61
INDICATING INSTRUMENT
Tachometer Speedometer
When the engine is started in cold It is recommended to follow the driving
state or the cooling device is turned speed allowed by the traffic regulations.
on, the engine idle speed will surpass The vehicle speed shall not be more
1,000r/ min; after the engine working than 40km/h during cornering.
temperature increases and the cooling If the vehicle is travelling under traction
device is turned off, the engine idle or in the spare mode of the automatic
speed will be: transmission, the speed shall not be
N6A 10FX3A PSA engine: 820±50r/min more than 50km/h.
DFM A16 engine: 750±50r/min. It is essential to ensure a favorable
The upshifting should be done for visibility and a safe braking distance
manual transmission when the engine when driving at high speed.
speed is more than 3,000r/min.
During the running-in period, it is better
that the engine speed is no more than
4,000r/min.
62
INDICATING INSTRUMENT
63
INDICATOR LAMP AND WARNING LAMP
Left turn signal indicator lamp Right turn signal indicator lamp By operating the turn signal lamp switch,
See Page 78 for details See Page 78 for details the outside turn signal lamp will glisten
and the corresponding indicator on the
instrument panel will flash. If either front
or rear turn signal lamp is off, the flashing
frequency of the indicator lamp will
double. Press down the hazard warning
switch, and the left/right turn signal
indicator lamps will flash simultaneously.
64
INDICATOR LAMP AND WARNING LAMP
Position lamp indicator Parking brake warning lamp Store or IKCO authorised representatives
See Page 79 for details If the parking brake lever is not for servicing. 1
released or is just released partially, the
Low beam indicator warning lamp will be lighted. Door ajar warning lamp
See Page 79 for details If this lamp is on, it suggests that
Low brake fluid level warning at least one door remains open.
High beam indicator lamp In case that the door is just slightly
See Page 79 for details The lamp will be lighted in case of closed, the warning lamp may be off;
insufficient brake fluid. In this case, park therefore, please lock door.
Front fog lamp indicator the vehicle immediately and contact This lamp can keep on working when
See Page 79 for details either nearest Dongfeng Franchise the ignition switch is disconnected.
Store or IKCO authorised representatives
Rear fog lamp indicator for servicing. Driver’s safety belt unfastening
See Page 79 for details warning lamp
Engine oil pressure warning The lamp is lighted with ignition key at
Electric defogging indicator lamp M position.
See Page 107 for details If the lamp is lighted during the driving, When the vehicle speed is higher
shut down the engine, check the oil level than 10km/h and the safety belt is not
and turn to either nearest Dongfeng fastened, the lamp will be lighted along
Franchise Store or IKCO authorised with the audible alarm and will remain
representatives for help. on after the audible alarm sounds for
30s. This lamp will be off when the driver
Battery charging warning lamp tightens the safety belt buckle.
The lamp should be off when the
engine is running. If the lamp stays on Airbag warning lamp
or flashes, the charging fault or overlow See Page 80 for details
voltage may occur. Please contact
either nearest Dongfeng Franchise
65
INDICATOR LAMP AND WARNING LAMP
Note:
Note:
The subtotal mileage is progressively
The total mileage is displayed on
accumulative with an upper limit of
the combination display when the
Ignition switch turned off 999.9; if reached, it will be zeroed
ignition key is turned off but the
All records and indicating icons are off. automatically and then the counting
position lamp is turned on.
will be resumed.
67
COMBINATION DISPLAY
Warning:
It is strictly prohibited to adjust the
Min. luminance instrument panel luminance during
Luminance of 75-100% driving.
68
COMBINATION DISPLAY
Note:
If the gear display indicator lamp
on the combination display stably
indicates a value or letter, the vehicle
is at this gear or running at this gear.
If the gear display on the combination
display demonstrates symbol “-”
with the “ ” and “ ” indicator
lamp flashing and the audible signal
sounded, the automatic transmission
may operate abnormally.
In this case, please contact either
Dongfeng Franchise Store or IKCO
authorised representatives.
69
COMBINATION DISPLAY
Note:
If the gear display indicator lamp
Display at M gear: on the combination display stably
At M gear, the transmission is shifted to indicates a value or letter, the vehicle
the manual mode with the gears able is at this gear or running at this gear.If
to be switched from 1st to 4th gears, as the gear display on the combination
display demonstrates symbol “-”
Gear display: shown below.
with the “ ” and “ ” indicator
lamp flashing and the audible signal
sounded, the automatic transmission
may operate abnormally.
In this case, please contact the
Dongfeng Franchise Store or IKCO
authorized representatives.
70
MULTI-FUNCTION DISPLAY (SEGMENT CODE)
General
The multi-function display is used to display clock and date; through the operation of function key D, the following information can 1
be shown in the display area in sequence:
Instantaneous fuel consumption/average fuel consumption/average speed /mileage/driving range and others.
The backlight of the multi-function display is linked with the light combination switch. The information on the multi-function display
can be adjusted only when the ignition switch is at M position.
Description on panel layout:
D function key
71
MULTI-FUNCTION DISPLAY (SEGMENT CODE)
Note:
The instantaneous f u e l consumption
is not displayed when the vehicle
speed is lower than 30km/h.
72
MULTI-FUNCTION DISPLAY (SEGMENT CODE)
General
1 The multi-function display is used to display clock, date and outside temperature; through the operation of D key, the following
information can be displayed in the display area in turns:
Travel information such as normal mode and travel information 1 and travel information 2.
The multi-function display backlight is linked with the light combination switch.
The information on the multi-function display can be adjusted only when the ignition switch is at M position.
Description of panel layout:
D function key
74
MULTI-FUNCTION DISPLAY (DOT MATRIX)
Travel information 1:
Power interface: Displaying the normal mode information as well as:
Displaying the DONGFENG AEOLUS Instantaneous fuel consumption:
brand for about 3s. 8.2L/100km
Average speed: 35km/h
Mileage: 366km
Normal mode:
24h system time, 11:45 pm
Outside temperature: 4ºC Travel information 2:
Calendar: 2013-02-27, Wednesday Displaying the normal mode information as well as:
The door self-locking function works automatically Average fuel consumption: 7.4L/100km
Driving range: 388km
The cruise control function is being
activated
75
MULTI-FUNCTION DISPLAY (DOT MATRIX)
76
MULTI-FUNCTION DISPLAY (DOT MATRIX)
77
MULTI-FUNCTION DISPLAY (DOT MATRIX)
79
H30 CROSS ROOF RACK
80
LIGHT COMBINATION SWITCH AND HAZARD WARNING LAMP
81
LIGHT COMBINATION SWITCH
82
WIPER COMBINATION SWITCH
83
YOUR VEHICLE AT A GLANCE
Danger:
Do not run the engine for a long time
in enclosed or badly-ventilated site to
avoid exhaust gas poisoning.
85
REARVIEW MIRROR
Interior rearview mirror Electric exterior rearview mirror The rearview mirror plane is of sphere to
Grip and rotate the interior rearview Select the rearview mirror to be adjusted: enlarge the visual field on sides.
mirror to adjust it to the appropriate Rearview mirror at driver’s side The distance of objects seen from the
position. The toggle at the lower edge (turning the knob leftward) mirror is father than the actual situation;
enables the rearview mirror to be set at Rearview mirror at passenger’s side thus, please estimate the distance
the following two positions: (turning the knob rightward) correctly.
• Daytime position (with toggle forward) Adjust the exterior rearview mirror in
• Night position (with toggle backward) four directions by adjusting knob .
The toggle at the lower edge of the Switch the selector key to the middle
rearview mirror should be pushed or position after the adjustment.
pulled when shifting from one position to Rearview mirror defrosting/defogging*: Danger:
the other position. This function is linked with the rear Do not adjust the rearview mirror
window defrosting/defogging function. during driving to ensure driving
safety.
After parking, fold the rearview mirror
manually backwards if necessary;
open it before driving.
86
HEADLAMP ADJUSTMENT
87
1
88
2 DRIVING
Note:
When the vehicle equipped with the
2 reverse radar is shifted to the reverse
gear, the radar alarm will beep once.
Note:
Protect the automatic transmission
control panel guide groove from invasion
of foreign matters such as coins and
melon seeds as well as fluids such as
Manual transmission Automatic transmission water and juices, to avoid transmission
Five direct gears and one reverse gear. The engine can be started only when the manipulation malfunction.
During gear shifting, depress the clutch shift lever is at parking gear (P) or neutral
pedal to the limit; then release it slowly gear (N).
after shifting. During driving, do not When the shift lever is at other gears, the
Note:
put the foot on the clutch pedal all internal safety locking mechanism will The automati c transmission is provided
the time; or else, it is easy to cause cut off the ignition circuit, therefore, the with shift lever P-gear locking function;
clutch failure. engine cannot be started. therefore, the shift level will be locked
Start the vehicle at the 1st gear. After the engine is started, depress the once being switched to the P gear. Do not
Do not apply the reverse gear before the brake pedal and shift to the automatic pull the shift lever forcibly in the case.
vehicle is completely stably stopped. direct gear (D) or reverse gear (R) Instead, depress the brake level to
unlock the P gear when the ignition key is
Slowly shift the reverse gear to avoid according to the actual requirements. connected to realize gear shift.
noises and even transmission damage. Then, the vehicle can be started for • The parking gear (P) can be shifted only
driving after releasing the brake pedal. when the vehicle is completely stably
stopped after depressing the brake
pedal.
• Always confirm that the shift lever is
at parking gear (P) before leaving the
vehicle.
90
TRANSMISSION (STARTING/DRIVING) *
Note:
It is prohibited to perform manual
downshifting forcibly when the
engine speed is higher than 4,000 r/
min.
92
TRANSMISSION (STARTING/DRIVING) *
93
TRANSMISSION (STARTING/DRIVING) *
94
TRANSMISSION (STARTING/DRIVING) *
95
ELECTRIC POWER STEERING*
The electric power steering system shall be used to operate the steering
is able to provide assistance during wheel, especially during sharp turning or
driving, so as to reduce the operation lowspeed driving. Note:
efforts of steering wheel. In such a case if any, park the vehicle at • If the engine fails to run or stop
2 During parking or driving at excessively a safe place and shut down the engine; during driving, the steering
low speed, if the steering wheel is restart the engine to reset the system. assistance will lose and the steering
operated repeatedly or continuously, EPS warning lamp will be lighted, but wheel operating effort will be larger.
the assistance to the steering wheel the engine shall be shut down after • If the EPS warning lamp is lighted
when the engine is running, the
will decrease, so as to protect the traveling for a certain distance. If the
steering wheel assistance will lose
electric power steering system against lamp fails to go out or is re-lighted during
but you can still control the vehicle.
overheat and damage, When the the driving, have your vehicle inspected However, larger force is required
assistance reduces, the operation to at either Dongfeng Franchise Store or to operate the steering wheel
the steering wheel becomes harder. It, IKCO authorised representatives. especially during sharp turning or
however, will recover to be normal after low-speed driving.
the temperature of the electric power
steering system lowers down. Please
avoid such a kind of steering wheel
operation, since it will cause the electric
power steering system overheat.
When rotating the steering wheel quickly,
grating may be heard and it is not a fault.
When the engine is running, the EPS
warning lamp will be lighted, suggesting
that the electric power steering system
has problems; the steering booster will
fails to work but still can help to control
the vehicle. However, a larger force
96
BRAKE
The brake system has two independent Type of brake Function of ABS
hydraulic oil circuits. If one circuit fails, This vehicle applies the vacuum booster ABS is the abbreviation for anti-lock
the other can brake the wheel as well. brake, which utilizes the engine vacuum brake system. It is only required to
effectively to enhance the brake force. depress and hold the service brake
Application of brake
If the engine stops, the vehicle can still pedal to operate this system.
2
Do not put the foot on the brake pedal
be braked by depressing the service ABS controls the brakes of all wheels to
during driving, or else, the brake will be
brake pedal. But a larger pressure is prevent the wheel from locking during
overheated, the wear of brake disc and
required to stop the vehicle and the emergency braking and braking on the
brake block will be speeded up and the
brake distance will be lengthened. smooth road.
fuel consumption will increase.
If the engine fails to run or is shut down This system adjusts the brake fluid
during driving, the brake booster will not pressure by detecting the rotary speed
work and a larger force is required to of each wheel, so as to prevent the
Warning depress the brake pedal. vehicle from side sliding due to wheel
• Do not coast the vehicle with the locking.
Precautions for brake wetting
engine shut down. This system, through avoiding wheel
When washing vehicle or driving in water,
• To reduce brake wear and avoid locking, helps the driver to control the
the brake may be wetted. As a result, the
brake overheat, decrease the steering wheel better and reduces
brake distance will be lengthened and
speed and switch to the lower the possibility of side sliding when the
the vehicle will drift during braking.
gear when driving down a long vehicle brakes on the smooth road.
To dry the brake, slightly depress the
slope. Brake overheating will
service brake pedal when the vehicle
weaken the brake performance,
travels at a safe speed, heating the
causing the vehicle out of control.
brake until the brake recovers normal.
On the smooth road, be careful for
Avoid high-speed driving before the
braking, accelerating or downshift.
brake can work normally.
Sudden braking or accelerating
will cause wheel slip and then
accident as a result.
97
BRAKE
98
REVERSE RADAR*
Activating/deactivating
even if equipped, is limited; therefore,
observe the environmental condition 2
When the ignition key is at the M position carefully behind the vehicle tail as well so
as to ensure safety.
and the transmission lever is shifted
to the reverse gear, the buzzer beeps
once, suggesting that the detecting
system is activated.
Turn off the reverse radar by shifting the
transmission lever off the reverse gear.
Reverse radar Reverse radar display
The obstacle detecting sensor is located In terms of vehicle equipped with
in the rear bumper. Note: dotmatrix type multi-function display, see
Shift to the reverse gear to reverse the Ensure that the obstacle detecting sensor Page 75 for display of the distance of
vehicle; afterwards, the radar detector is not covered by dirt, rime and snow in obstacle detected by the reverse radar.
can detect for obstacles behind the winter and bad weather.
During reversing, the distance of
vehicle tail when the vehicle speed is obstacle away from the vehicle tail can
lower than 5km/h. be displayed and indicated on the multi
If an obstacle is within the detecting Note: function display.
range, the buzzer installed at the left rear The sharp projections and small long Do not move the vehicle backwards
of the vehicle will sound for alarming. If objects cannot be detected by the any more if three levels of short bars
the obstacle is about 75cm away from reverse gear. indicating for obstacles are lighted.
the detecting sensor, the buzzer will
alarm at higher frequency. The ultrasonic interference sources
around the radar system such as Note:
horn, motorcycle engine and some Though the vehicle equipped with dot-
radio equipment (like walkie-talkie) will matrix type multi-function display can know
the situation of obstacle through the display
influence the detection and alarm of screen, but you still can not completely rely
reverse radar. on the screen for reverse control.
99
REVERSE IMAGE*
Reverse image Reverse image display Green area: safety area where the
Reverse camera The display will show the relative distance obstacle is about 300cm away from the
The reverse camera is installed beside the between the vehicle tail and the obstacle vehicle tail
trunk lid switch. by colorful image. This system can help Yellow area: warning area where the
The reverse camera-recording function will the driver to detect the relatively larger obstacle is about 150cm away from the
be activated automatically when the shift stationary obstacles to avoid vehicle vehicle tail
lever is switched to the reverse gear. scratch. However, the system cannot Red area: dangerous area where the
detect the obstacles at the corners on both obstacle is about 40cm away from the
sides of the bumper or the area below the vehicle tail
bumper as well as those on the ground.
100
REVERSE IMAGE*
Danger:
• The reverse image system can facilitate the drivers, but not substitute the correct reverse method. Before reversing, check the 2
rear side for safety and reverse slowly.
• Due to the application of wide-angle lens, the distance seen from the reverse image system is different from the actual one and
the objects will be distorted.
• Confirm that the trunk lid has been closed tightly during reversing.
• Do not cover any things on the reverse camera.
• Since the monitored area is limited, the corners on both sides of the bumper and the area below the bumper cannot be seen
via the reverse image system.
• When cleaning the vehicle with high-pressure gun, do not apply high-pressure water spray around the reverse camera to
prevent it from malfunction, firing or electric leakage due to water invasion into the system and condensation on the lens.
101
2
102
3 VEHICLE EQUIPMENT
104
AUTOMATIC A/C*
Temperature adjustment knob Refrigeration button (A/C switch) The system will adjust temperature
Display of set temperature Adjustment button of air distribution and air volume inside the vehicle
Refrigeration switch display Selector button of external air automatically depending on your
Defrost mode display circulation choice.
Internal & external air circulation Selector button of internal air Generally, setting automatic mode
display circulation (pressing down ) will keep the air
Air volume display System OFF button conditioning in optimally comfortable
Air volume adjustment knob Defrosting/defogging button of rear condition.
Air distribution display windshield
Automatic mode display Defrosting/defogging button of front
windshield & front side windows
Auto mode switch button
105
AUTOMATIC A/C*
1-Temperature adjustment knob 4-Air distribution display The following five functions can be
The system can adjust and display the managed automatically depending on
set temperature. To central & side vents the chosen temperature:
To adjust or display the set temperature, - Air volume;
- Cabin temperature;
turn the knob: To passenger foot
- Air distribution;
Turn counterclockwise: the temperature - Refrigeration equipment operation;
is decreased; To windshield, front side window
3 Turn clockwise: the temperature is and passenger foot
- External air circulation.
It is recommended to open all air
increased. outlets.
2-Display of set temperature To windshield glass To avoid the fogging of the interior
The display corresponding to the vehicle in chilly or wet weather, it is
maximum heating request (higher than recommended to apply the automatic
5-Refrigeration button (A/C switch)
32 °C): HI (high); mode.
Press the control button to start
The display corresponding to the
maximum cooling request (lower than the refrigeration function. And the
18°C): LO (low). display will show . Note:
3-Adjustment button of air 6-Automatic mode switch button Under automatic A/C mode, before the
distribution engine reaches the normal temperature,
Press down the control button to Press the button to start A/C
the air volume of automatic A/C will reach
change the air distribution, and the system, and the symbol will be the comfortable requirements gradually.
circulation will be displayed on the shown on the display. The interior temperature may be lower
display. (higher) than the comfortable temperature
the moment when you enter into the
vehicle. In this case, trying to reach
the desired comfortable temperature
Note: by changing the set temperature is not
The comfortable temperature of feasible.
cabin is related to the external The system will use its maximum regulation
conditions, so it may be different and control capability automatically to
from the set temperature. compensate it as soon as possible.
106
AUTOMATIC A/C*
7-Defrosting/defogging of front 9-Internal & external air circulation The air volume is displayed by filling the
windshield & front side windows display vertical bar gradually;
When the function comes to work, the When maintaining other adjustments, The maximum air volume is displayed
defrosting/defogging symbol will appear closing the external air intake can isolate as:
on the display: . external odors or uncomfortable smoke, 12-Turning off A/C system
Pressing this button can achieve defrost/ meanwhile, the set temperature can be Press the button to turn off A/C
defog quickly, which, however, may reached as soon as possible. Open the system, with no symbols shown on the 3
influence air intake, air conditioning, air external air intake to change the interior display.
distribution and air volume. air or defog as required.
Press the control button or 10-Defrosting/defogging of rear
again to quit the function. windshield
8-Selection of internal & external air When the function is in operation, the
circulation symbol will appear on combination
Press the control button to open instrument display.
the external air intake, and the display This control key can be used to realize
area will display . the rear windshield defrosting defogging Note:
Press the control button to close quickly. When the engine is not running, do not
the external air intake, and the display To avoid additional electricity turn on the refrigeration and air volume
area will display . consumption, this function can delay for switch to avoid excessive consumption of
battery power.
turning off automatically.
11-Air volume display
The adjustment of air supply can be
realized as follows:
Turn clockwise: the air volume is
increased
WARNING
Turn counterclockwise: the air volume is Internal air circulation for a long time
decreased may cause poor interior air.
107
STORAGE DEVICE
Note:
For safety concerning, close the glove box
cover when driving.
108
INTERIOR LIGHTING & TRUNK LIGHTING
Interior front & rear roof lamps & are the switches of left/right Trunk lamp
Operation of the interior front & rear roof reading lamps, after either of them is The trunk lamp will turn on automatically
lamps: pressed down, the corresponding roof when the trunk lid is opened, and
is the door operation-based lighting lamp will be on, and then the lamp will whether to turn off the ignition switch or
function switch. Press this switch and be off if the switches are pressed again. not has no relation to the trunk lamp.
open the door, and then the roof lamp The reading lamps, if turned on, are not
will be on; after the door is closed, it will controlled by the delay off, and are still
be off after 10s delay. When the roof on even if the ignition switch is turned off,
lamp is on during the delay, the roof so pay attention to closing them timely
lamp will be off if the door is locked by once it is turned on to avoid excessive
the remote controller. Press down this power consumption when the vehicle is
switch again to deactivate this function. stopped.
109
SUN VISOR & GLASSES BOX*
Sun visor The sun visor can also be turned to the Glasses box*
The left sun visor face has an interlayer side door for shielding the sun from the The glasses box is on the left door frame
for notes. side. Take the support shaft from the at driver’s side. Pull it downwards to
The right sun visor is equipped with a clip and turn the sun visor to the side open it up.
cosmetic mirror on the back. window.
The sun visor can be overturned. Turn When getting on or off the vehicle,
it downwards for shielding the sun from please verify that the sun visor has been
the front to avoid dazzling. placed to the original position.
WARNING
Please do not use the cosmetic mirror
when driving.
*If equipped
110
CIGAR LIGHTER, ASHTRAY* & HANDLE*
WARNING
The cigar lighter still works when the
ignition switch is turned off; any person, Note:
especially the children are prohibited The storage box in front of the shift lever
playing with the cigar lighter to avoid cannot be extracted for cleaning, for it is
burns or fire hazard. not be used as the ashtray.
* If equipped
111
REAR SHELF
112
TRUNK
113
SUNROOF*
Control panel Slide to open/close the sunroof Slide forwards for closing
Slide backwards to turn on/slantwise Slide backwards for opening In case that the sunroof is opened,
to turn off the control button. Briefly press down the button (less briefly press the button (less than
Slide forwards to turn off/slantwise to than 0.5s), and the glass panel will drive 0.5s) and the glass panel will be closed
turn on the control button. the sunroof visor move to the maximum automatically;
position automatically. During the glass During the glass panel sliding to close,
panel sliding for opening, press down pressing down any button will enable the
any button to enable the panel to stop at panel to stop at the current position;
the current position; Press and hold the button (more than
Press and hold the button (more than 0.5s) to close the sunroof by sliding,
0.5s) for opening the sunroof by sliding, and then the glass panel will be stop
and then the glass panel will stop sliding sliding immediately when the button is
immediately when the button is released. released.
The sunroof visor should be closed by
pulling manually.
* If equipped
114
SUNROOF*
Anti-pinch function
If being held down by obstacles during
closing, the sunroof will return to the
completely open state immediately,
afterwards, press down or to
operate the sunroof again.
The anti-pinch function is only 3
applicable to the short press mode but
not the press-hold mode.
During high speed driving, the air
resistance may cause that the sunroof
Slantwise open/close the sunroof Slantwise close cannot be closed during its automatic
Slantwise open In case that the sunroof is opened, closing, in this case, press and hold the
In case that the sunroof is closed, press down the button , and the glass button or to close the sunroof.
press down the button , and the panel is lowered down for closing.
rear part of glass panel will be opened The sunroof visor should be closed by
slantwise, and the sunroof visor can be pulling back manually.
opened by pulling backwards manually.
WARNING
When the automatic anti-pinch function
detects out the obstacle, there still
remains certain forward inertia, please
ensure that hands, heads, bodies and
other parts of all passengers are not out
of the sunroof.
* If equipped
115
SUNROOF*
WARNING
When the automatic anti-pinch function
detects out the obstacle, there still
remains certain forward inertia, please
ensure that hands, heads, bodies and
other parts of all passengers are not out
of the sunroof.
*If equipped
116
SUNROOF*
Special note The sunroof can only be opened upon Do not put heads or hands out of the
Do not open the sunroof when it is driving for 5 min at least after raining sunroof when driving.
raining or vehicle is being cleaned. or vehicle cleaning (in order to dry
stagnant water on the roof by air).
117
SUNROOF*
WARNING
Before opening the sunroof, please
ensure that no obstacle on the roof
affects the glass panel movement.
Do not open the sunroof when the roof
is accumulated with snow or is frozen.
118
4 MAINTENANCE
119
FLUID APPLICATION REGULATIONS
The special high-quality fluid can keep IKCO authorised representatives, who
the vehicle under normally technical will also inform you of the correct using
condition effectively, please pay special methods.
attention to the quality of the engine oil. Do not use any fuel additives without
Do not use the non-designated fluid, or our verification.
adverse consequences will be caused to
the vehicle.
For specific types and consumption,
refer to Warranty Manual.
4 Fuel additives
The quality of fuel and its additives affects
the running condition, performance and
service life of the engine directly. The
fuel additives can be used to prevent Note:
corrosion, clean fuel system and prevent 1.In extremely freezing weather,
the engine from carbon deposits etc., so select the engine oil of 5W/30 A5B5,
it is recommended to use the fuel with 5W/30 SL (SJ) grade or above
additives. verified by us.
If the fuel without additives is used 2.In extremely freezing weather,
frequently, or faults such as hard select the coolant with superior
engine start, unstable idling, difficult antifreeze properties verified by us.
acceleration, power performance 3.Select the windshield cleaning fluid
reduction etc. occur, add the appropriate according to the vehicle ambient
additives when adding the fuel. temperature to avoid freezing.
It is recommended to use fuel additives Please contact either Dongfeng
verified by us, all of which can be bought Franchise Store or IKCO authorised
either from Dongfeng Franchise Store or representatives for fluid purchase.
120
ENGINE COMPARTMENT AND FLUID LEVEL & CHECK
121
FLUID LEVEL & CHECK
Windshield cleaning fluid Add the engine oil For the check of fluid level, see Page
reservoir For engine oil grade and capacity, 127.
Capacity: 3L see Warranty Manual; do not use other Battery (see Page 143)
In order to achieve the best washing additives. Spec.: 12V
effect and utilization safety, please use Coolant Air filter
cleaning fluid verified by us. Please add Cold engine: The fluid level Clean and replace the filter
the cleaning fluid slowly. should be between the maximum (MAX) element as specified in Warranty
marking and the minimum (MIN) marking Manual.
of expansion tank.
4 Note:
Hot engine: After the engine is stopped,
When the ambient temperature is lower wait for 15 minutes or till the temperature
than 0ºC, antifreeze cleaning fluid should is less than 100ºC, open the tank cover
Note:
be used. slowly by hands wrapped with the If the coolant needs to be added
cleaning cloth to avoid burns. frequently, it indicates that the cooling
system has faults, check to find out the
Power steering fluid* If the added coolant is more than 1L,
causes as soon as possible. The coolant
Capacity: 1.5L have the cooling system checked at should be refilled or replaced at Dongfeng
When the engine is stopped, check the Dongfeng Franchise Store or IKCO Franchise Store or IKCO authorized
representatives.
fluid level. authorized representatives.
The level of the fluid reservoir should be Brake fluid
between the maximum (MAX) and the When the level of brake fluid is too
minimum (MIN) markings. low and up to the DANGER position, the
low brake fluid level warning lamp will be Note:
on. When the vehicle ambient temperature
is below -30ºC, the coolant should be
replaced by the one with stronger low
Note: temperature resistance at local Dongfeng
Running without fluid is prohibited in any WARNING Franchise Store or IKCO authorized
cases to avoid damage to the power Check the coolant when engine is cold representatives.
steering pump. to avoid burns.
122
FLUID LEVEL & CHECK
Note :
The oil level must not exceed the
upper limit marking or the lower
limit marking.
123
FLUID LEVEL & CHECK
4
Coolant expansion tank Power steering fluid reservoir* Brake fluid reservoir
The level of the coolant should be Check the fluid level when the engine is The brake fluid level should be checked
checked when the engine is cold. The stopped. regularly, and should be between the
coolant level should always be between The fluid level in the reservoir should DANGER and the maximum (MAX)
the minimum (MIN) and the maximum be between the minimum (MIN) and the markings, close to the maximum marking
(MAX) markings. The content of maximum (MAX) markings. as far as possible.
If the brake fluid level warning lamp
antifreeze in the coolant should proper Running without fluid is prohibited in any turns on when driving, park the vehicle
enough to remain the coolant in fluid cases to avoid damage to the power for inspection and seek help either from
form at low temperature. The coolant steering pump. Dongfeng Franchise Store or IKCO
should have corrosion resistance and For oils: see Warranty Manual. authorised representatives.
high-temperature stability. In order to maintain a good braking
In order to maintain the coolant performance, the brake fluid should be
performance, the coolant should be replaced every two years.
replaced every two years in chilly
weather.
The coolant should be changed either Note:
at Dongfeng Franchise Store or IKCO If the brake fluid level is lowered down obviously
authorised representatives. Note: in a short time, the brake system may have
The coolant with superior antifreeze properties leakage. Have it repaired at Dongfeng Franchise
should be selected for application at -30ºC. Store or IKCO authorized representatives
immediately.
124
INTERIOR MAINTENANCE
125
INTERIOR MAINTENANCE
126
BODY MAINTENANCE
Do not wipe the body drily Wipe windshield & door window Asphalt stains on the body
Do not wipe the painted surface and Do not use silicone-based products. Clear the stains as soon as possible, and
plexiglass surface (such as lampshade To achieve a high quality wiping effect, do not scrape it or use gasoline or fabric
etc.) with gasoline, kerosene, please use the cleaning fluid supplied detergent, but the special cleaning fluid
trichlorethylene, strong alkali water, either by Dongfeng Franchise Store or should be used.
alcohol etc. IKCO authorised representatives.
Body cleaning Paint polishing
To maintain a good painted surface, it is It is recommended to perform paint
necessary to clean the body frequently polishing in winter after the body is
but avoid strong sunshine or too low completely cleaned and dried. 4
temperature. Polish with fluid or emulsion polishing
Bird feces, insect secretions, resin and agents.
other matters having strong corrosion Wipe the exterior trims & light
should be cleared as soon as possible. alloy
Or else, their damage to painted surface Wash them with soapy water or water
will be speed up in hot days. with a little of detergent or cleaning fluid,
In any cases, wash the body with plenty then flush them with plenty of water. To
of water and wipe it clean with chamois. maintain the glossiness of metal surface,
After washing, brake the vehicle for wax it after drying.
several times when driving to dry the
brake friction pair.
127
VEHICLE MAINTENANCE
Asphalt & gasoline stains on bumper Typically, the vehicle corrosion is The anti-corrosion coating at the vehicle
The stains should be cleared with resulted from the following two reasons: lower side should be checked and
special cleaning agents. Moisture accumulated in the body repaired regularly.
Even though the vehicle adopts holes. The sludge and antifreeze
corrosion resistant materials and salt in the vehicle lower gaps is more
undergoes the anti-corrosion treatment, likely to accumulate moisture to
after the vehicle is stopped or driven for make those parts more vulnerable to
a period of time, especially after being corrosion.
driven frequently on road unfrozen by The peeling off of protective paint and
4 salt for a period of time, the engine protective layer in the body surface
compartment and the body underbody and the underbody.
should be cleaned and protected again. Through some simple regular
maintenance, your vehicle will be free of
corrosion:
Repair immediately in case of paint
peeling off or scratches;
Check and clean the doors and drain
holes of body underbody;
Check the humidity of the floor covers,
since the carpets and floor mats will
Note: accumulate moisture for a long time,
If the high pressure washing machine especially in winter, thus causing floor
is used, do not direct the sprayer to the corrosion;
rubber protective parts of transmission Clean the underbody with high pressure
and steering mechanism and other
components, and do not spray directly
spray gun but carefully protect the
into the exterior trim, canopy seams, ABS wheel speed sensor and wires
radiator and engine compartment. connected to each wheel;
128
5 OPERATIONAL RECOMMENDATIONS
129
FUEL-SAVING MEASURES
130
FUEL-SAVING MEASURES
Save fuel & reduce emission Adjust the engine Check the tyre pressure
Fuel saving is not completely determined Check the main components of ignition Check it weekly, and the insufficient tyre
5
by the vehicle design and its technical system and fuel supply system annually pressure will increase the wheel rolling
characteristics, but also related to your at least. resistance, thus the fuel consumption will
use. Ignition system be increased.
The following measures can help you to Keep the correct spark plug clearance. Air filter
reduce fuel consumption: Fuel supply system The filter element blockage will decrease
- Keep your vehicle in good working Check the mechanical connection the engine air intake efficiency, thus, the
condition; conditions of fuel supply system, and element should be replaced regularly
- Comply with the service and check the positions for oil leakage. as the interval specified in the Warranty
maintenance rules specified by us; Manual.
- Apart from overhauling and lubricating
oil & coolant replacement etc., the
working conditions of components
affecting the fuel consumption mostly
should be checked regularly.
131
OPTIONAL ELECTRICAL ACCESSORIES
132
FUSE
Fuse box
There is a fuse box at the lower left of
instrument panel and in the engine
compartment respectively.
Fuse replacement
Before replacing the fuse, find out the
5
causes of faults and troubleshoot them
correspondingly. Number of each fuse
is marked on the fuse box, and the
unnumbered fuse is for spare.
Fuse at the same amperage (in the same
color) should be used to replace with the
damaged fuse.
133
FUSE
134
FUSE
135
FUSE
5 F10
F11
15A
30A
Fuel pump
Engine
Mini
Mini
F12 15A ABS valve Mini
F13 20A ABS pump Mini
F14 20A Front fog lamp Mini
F15 10A Brake lamp Mini
F16 10A Compressor Mini
F17 60A Cooling fan JCASE
F18 40A Ignition switch JCASE
F19 50A Cabin power JCASE
F20 50A Cabin power JCASE
F21 40A Blower JCASE
F22 30A Front door motor JCASE
F23 TBD Reserved Mini
F24 60A EPS controller JCASE
F25 TBD Reserved ATO
F26 TBD Reserved ATO
136
BATTERY
137
START BY EMERGENCY BATTERY
138
BULB REPLACEMENT
139
BULB REPLACEMENT
140
BULB REPLACEMENT
Side turn signal lamp (W5W) H30 CROSS front fog lamp
When this lamp has faults, it is (H11/55W)
5
recommended to have it replaced either Remove the fender and pull out the
at Dongfeng Franchise Store or IKCO plug, turn the fog lamp bulb base
authorised representatives. counterclockwise for about 45° to
remove it (with the base) for replacement
of bulb and its base.
S30/H30 front fog lamp (H11/55W)
Remove the fender, and turn the dust
cover counterclockwise for about 45° to
remove the dust cover; pull out the plug,
and then press the head of steel clip
to decouple it, remove the bulb (with a
section of wire) for replacement.
Reinstall in the sequence reverse to that
mentioned above. It is recommended to
go to either Dongfeng Franchise Store
141
BULB REPLACEMENT
Rear combination lamp (S30) Open trunk lid, and remove the interior
5 Brake lamp & position lamp: LED
Brake lamp & position lamp (LED)
If brake lamp and position lamp are trim of the trunk lid.
Turn signal lamp: PY21W damaged, have them replaced at Rear fog lamp (P21W)
Rear fog lamp: P21W Dongfeng Franchise Store or IKCO Turn the lamp holder (in orange)
Reversing lamp: W16W authorized representatives. counterclockwise for 45° to remove
Open the trunk lid and two small trim Rear turn signal lamp (PY21W) the lamp holder and bulb, press
covers of rear combination lamp on rear Turn the lamp holder (in orange) the bulb inward gently and turn it
side wall, and remove two mounting counterclockwise for 45° to remove counterclockwise, after removing the
bolts, pull out rear combination lamp the lamp holder and bulb, press bulb for replacement, reinstall it in the
backwards, pull out the plug, and the bulb inward gently and turn it reverse order.
remove the rear combination lamp. counterclockwise, after removing the Reversing lamp (W16W)
bulb for replacement, reinstall it in the Turn the lamp holder (in white)
reverse order. counterclockwise for 45° to remove the
lamp holder and bulb, pull out directly
to remove the bulb. After replacing the
bulb, reinstall it in the reverse order.
142
BULB REPLACEMENT
Rear combination lamp (H30) turn it counterclockwise, after removing turn it counterclockwise for removal.
Brake lamp & position lamp: P21/5W the bulb for replacement, reinstall it in After replacing the bulb, reinstall it in the 5
Reversing lamp: P21W the reverse order. (Note: Insert the high reverse order.
Rear fog lamp: P21W and low pins on both sides of lamp end Rear turn signal lamp (PY21W)
Turn signal lamp: PY21W correspondingly into deep and shallow Turn the lamp holder counterclockwise
Additional brake lamp & position notches of the lamp holder) for 45° to remove the lamp holder and
lamp: LED Reversing lamp (P21W) bulb, press the bulb inward gently and
Open the liftgate and two small trim Turn the lamp holder counterclockwise turn it counterclockwise for removal.
covers inside of rear combination lamp, for 45° to remove the lamp holder and After replacing the bulb, reinstall it in the
remove two mounting bolts; pull out bulb, press the bulb inward gently and reverse order.
the plug, and then remove the rear turn it counterclockwise for removal. Additional brake lamp & position
combination lamp. After replacing the bulb, reinstall it in the lamp (LED)
Brake lamp & position lamp reverse order. It is recommended to have the additional
(P21/5W) Rear fog lamp (P21W) position lamp and brake lamp assembly
Turn the lamp holder counterclockwise Turn the lamp holder counterclockwise replaced at Dongfeng Franchise Store
for 45° to remove the lamp holder and for 45° to remove the lamp holder and or IKCO authorized representatives.
bulb, press the bulb inward gently and bulb, press the bulb inward gently and
143
BULB REPLACEMENT
144
BULB REPLACEMENT
145
TOWING
Parallel towing (with four wheels of the Towing when the front or rear of the
5 towed vehicle left on the ground) Towing vehicle is lifted
eye is provided at the front and rear of Note:
Use the special towing device made of When the vehicle equipped with the
the vehicle. rigid rod and connecting strap. automatic transmission is towed, if the
The parallel towing at a low speed within
Fix the hook of the special towing device front wheels are on the ground, the gear
a short distance can be performed if lever should be shifted to Neutral (N)
allowed by the relevant regulations. Turn onto each suspension arm.
position.
the ignition key of the towed vehicle to Take all necessary measures to protect Because the front wheels will be locked
position A during the towing to unlock the front and rear bumpers and body if the gear lever is at P and the P locking
the direction lock. sheet metal from damage. mechanism of automatic transmission
Hook a metal bar onto the towing eye as will be damaged when performing the
shown in the diagram above. towing forcibly as a result. The towing
speed should be less than 50km/h, and
the distance should be less than 50km.
Note: Otherwise, perform towing with the lifted
In case of front towing, pry up the small front wheels.
WARNING round cover of the front bumper firstly,
When the engine is shut off, the power and then screw the towing eye, insert
steering and brake booster will not tyre wrench into the towing eye to tighten
function any more. the towing eye completely.
146
WHEEL REPLACEMENT
Spare tyre The driver’s tools of S30 model is placed Spare tyre
There is a buckle on the carpet below in the spacer of spare tyre. Remove the Turn counterclockwise and remove the 5
the trunk lock. Pull the buckle upwards tool spacer to expose the spare wheel. spare tyre locking bolt to take off the
to turn over the carpet. spare tyre.
147
WHEEL REPLACEMENT
Driver’s tool Remove the wheel the jack handle until the jack is loaded,
5 Warning triangle 1. Park the vehicle on the level hard but the wheel should not be off the
ground stably; hold the parking brake ground;
Jack handle
firmly to stop the engine, and shift the 4. Loosen the 4 wheel bolts with the
Jack brake to 1st gear or reverse gear (or wheel wrench diagonally but not fully
Wheel wrench shift the automatic transmission to P), unscrew them;
Removable towing eye turn on the hazard warning lamp and 5. Lift the jack again until the wheel is off
ask all passengers to get off the vehicle. the ground for several centimeters;
Place a cushion block behind the wheel 6. Unscrew the wheel bolts to replace
diagonally opposite to the wheel which the wheel.
is required to be replaced;
2. Remove the spare tyre;
3. Take out the jack from the trunk, and
place it near the wheel which is required Note:
to be replaced, with the jack head groove Jack is specially designed for the vehicle
aligned with the lifting point, lift the jack wheel and cannot be used for other
by a wheel wrench in combination with purposes.
148
WHEEL REPLACEMENT
Fit the wheel Put back the wheel Steel rim spare tyre
Fit the spare tyre onto the hub, and Remove the wheel central trim cover If your vehicle is equipped with light 5
verify that the fitting position is correct. from inside, and put the removed wheel alloy wheel or steel rim spare tyre
Screw and slightly tighten the bolts. into the trunk spare wheel rack, tighten and it is replaced with a steel rim one,
Loosen the jack to make wheel seat on the locking bolts of spare tyre. drive the vehicle with a speed not more
the ground, and take out the jack. Put back the wheel wrench and tool than 80km/h to the nearest Dongfeng
Tighten the wheel bolts with wheel spacer. Franchise Store or IKCO authorized
wrench diagonally. representatives for repair, after the
Inflate the wheel enough, and check wheel acceptable for normal running is
whether its pressure is the same with repaired properly, replace the spare tyre
that of the other wheels. immediately.
WARNING
When the vehicle is lifted by the jack
only, do not have any part of your body
stretched under the vehicle.
149
TYRE
Tips:
To ensure safety driving, it is very
important to always keep tyres in good
condition.
Note that the tyre inflation pressure should
always meet our recommendations and
should be check regularly (for example
once per week). Before long driving,
perform systematic checks, and do not
forget to check spare tyres! The tyre
should be checked in cold, for the tyre
will be heated during driving to increase
Tyre inflation pressure
5 For tyre inflation pressure, please refer
Tyre spec. 195/60 R15 88H/V
205/50
R16 87H
the tyre pressure. Do not correct the tyre
pressure when the tyre is hot.
to the tyre pressure label on the front Front tyre
210±5 240±5
(Light (Heavy 230±5
lower side of left front door frame. pressure
load) duty)
E.g.: (Unit: kPa) 200±5 240±5
Rear tyre
(Light (Heavy 230±5
pressure
load) duty)
Spare tyre
195/60 R15 88H/V
spec.
WARNING
Spare tyre
280 Insufficient inflation will cause the tyre
pressure
temperature rise abnormally, thus the
tyre may be damaged abnormally, even
disposed as a result. Excessive inflation,
on the other hand, will cause tyre swell
and suspension system damage.
The insufficient inflation pressure leads to
a high probability of flat tyre when driving
on the expressway.
150
TYRE
151
SAFETY TIPS
152
SAFETY TIPS
153
SAFETY TIPS
154
6 TECHNICAL CHARACTERISTICS
155
GENERAL TECHNICAL CHARACTERISTICS
Model code S30 H30 H30 CROSS S30 H30 H30 CROSS
156
OUTLINE DIMENSIONS (S30)
Dimensions in mm
157
OUTLINE DIMENSIONS (H30 CROSS)
Dimensions in mm
158
VEHICLE IDENTIFICATION
159
VEHICLE IDENTIFI CATION
160
7 INDEX
161
INDEX
162
INDEX
R W
remote control 16 & 17 Warning Lamps 84
Rear Ash Tray 111 Winter Precaution 152
Rear shelf 122
Recommendations For Washing The
Vehicle 127
Releasing Of The Lock For Steering Whee l 79
S
Safety Of The Road 93
Safety Of The Vehicle 39
Saving In Fuel Consumption 131
Seat Belts Safety Tips 48
Seats 27
Starting and Driving 90-95
T
Technical Information of The Engine156 7
Transporting The Vehicle 146
Tread wear Indicator 151
V
VIN plate 159
Vehicle Transport 146
Vehicle Identification 159-160
163
NOTE
164
Oct. / 2016 Iran Khodro Co. All rights reserved.
IRAN KHODRO Company (Public Joint Stock)
e-code: 540701E018-00
Gate No. 1, Iran Khodro Blvd,
KM.14 Karaj Makhsous Rd,
9007051092731-00
Shahid Lashgari Highway, Tehran, IRAN
Postal Code : 1389913657
Tel: (+9821) 48901
Fax: (+9821) 44934000-1
SMS Centre: (+98)30003
E-mail: info@ikco.ir
www.ikco.ir