Professional Documents
Culture Documents
Date _______________________________________________________
Company ___________________________________________________
Street ______________________________________________________
City/State/Zip ________________________________________________
Name/Title __________________________________________________
Tel: ( ) ______________________________________________
Fax: ( ) ______________________________________________
E-Mail______________________________________________________
Where did you first hear of Flexicon?
n Trade publication n Direct mail
n Representative n Trade show
n Internet n Other_______________________________
FLEXIBLE SCREW CONVEYORS TUBULAR CABLE CONVEYORS PNEUMATIC CONVEYING SYSTEMS BULK BAG DISCHARGERS
(including weigh batching systems) (including weigh batching systems) (including weigh batching systems) (including pneumatic, flexible
screw, and tubular cable
conveyor interface)
BULK BAG CONDITIONERS BAG DUMP STATIONS BULK BAG FILLERS CONTAINER DUMPERS
(including pneumatic, flexible (including pneumatic, (including pneumatic, flexible
screw, and tubular cable flexible screw, and tubular screw, and tubular cable
conveyor interface) cable conveyor interface) conveyor interface)
PLEASE PLEASE PLEASE PLEASE
COMPLETE COMPLETE COMPLETE COMPLETE
PAGES: PAGES: 1, 2, 3 PAGES: PAGES:
1, 2, 10, 11 1, 2, 11 1, 2, 3
MAT’L CONTACT
NON-CONTACT
_______ n mesh, n micron, n in. or n mm
SURFACES
SURFACES
Aerates or becomes fluidized
BULK DENSITY Packs, cakes or smears
Packed (densified) _____________________ Solidifies if left to sit or if vibrated
n lbs/ft3 or n kg/m3 Bridges or cavitates when hoppered
Loose (aerated) _______________________ Check appropriate boxes
Interlocks or mats, resisting flow
n lbs/ft3 or n kg/m3
Rat-holes when hoppered CARBON STEEL:
TEMPERATURE _____________ n ˚F or n ˚C Welded exclusively on the exterior
Hygroscopic and deburred. Exterior surfaces
n Ambient primed and painted.
Hazardous
MOISTURE CONTENT _________________% if “yes” specify: STAINLESS STEEL
FAT CONTENT ________________________% INDUSTRIAL FINISH:
Toxic Type 304, welded exclusively
OIL CONTENT ________________________% on the exterior and deburred.
Acidic
Exterior surfaces with microsphere
Flammable blasted finish.
Bulk Material C Explosive dust STAINLESS STEEL
REFINED FINISH:
(Generic and/or manufacturer trade name): Other: Type 304, product contact areas
_______________________________________ continuously welded and deburred.
Exterior surfaces with microsphere
Similar to other mat’l: ____________________ blasted finish.
STAINLESS STEEL
PARTICLE SIZE(S) SANITARY FINISH:
_______ n mesh, n micron, n in. or n mm Type 304, product contact areas
continuously welded and polished to
BULK DENSITY a 150 grit finish. Exterior surfaces
Packed (densified) _____________________ with microsphere blasted finish.
n lbs/ft3 or n kg/m3 OTHER (Specify):
Loose (aerated) _______________________
n lbs/ft3 or n kg/m3
TEMPERATURE _____________ n ˚F or n ˚C IMPORTANT
n Ambient Please ship a one-pint (.5 litre)
MOISTURE CONTENT _________________% sample of actual materials handled,
FAT CONTENT ________________________% with MSDS sheet if applicable.
OIL CONTENT ________________________%
OPTIONS
n Bag compactor n Bag support tray
n Solid cover n Vibrator
n Hinged cover n Agitator
n Cover with inlet port n Casters
n Screen n Low level sensor
End of Bag Dump Station Quotation Request Form End of Container Dumper Quotation Request Form
CONVEYING CAPACITY
WEIGHT:
Min______________ Max______________
n lbs/hr or n kg/hr
VOLUME:
Min______________ Max______________
n ft3/hr or n m3/hr
OPERATIONAL DUTY
n Continuous:
(non-stop running of conveyor)
________ hrs/day ________ days/week
n Intermittent:
CONTROL OPTIONS FLOOR HOPPERS
(frequent on/off cycling of conveyor) n Level sensor
Cycle time on:_____________________ n On/off timer HOPPER CAPACITY
Cycle time off:_____________________ n Batch timer n 1 ft3 (28l)
n Volumetric batching n Remote operator station n 3 ft3 (85l)
Batch weight:_________ n lbs or n kg n 5 ft3 (142l)
Required batch delivery time: EQUIPMENT n 8 ft3 (225l)
__________________ minutes n Mobile configuration n 14 ft3 (400l)
Batch frequency: ________ batches/day n Bulk bag discharger n 20 ft3 (560l)
(also complete pages 1, 2, 10, 11)
n Gravimetric batching
n Bulk bag filler
n Loss-of-weight system HOPPER OPTIONS
(also complete pages 1, 2, 11)
n Gain-in-weight system n Solid cover
n Bag dump station n Hinged cover
n Batching size range:_______ to ______ (also complete pages 1, 2, 3)
n Cover with inlet port
n lbs or n kg n Drum dumper n Screen
n Batching frequency:_______ batches/hr (also complete pages 1, 2, 3)
n Bag support tray
Batching accuracy required: ±______% n Silo n Vibrator
Number of ingredients being Holding capacity:_______ n ft3 or n m3 n Agitator
weigh-batched:____________________ n Casters
n Bag compactor
CONTROLLERS FOR:
n Fixed rate conveying MATERIAL SOURCES AND DESTINATIONS
n Variable rate conveying
EXISTING
CHECK MATERIAL MATERIAL EQUIPMENT
NEW
n Weigh batching ALL SOURCE DESTINATION TYPE
THAT APPLY (indicate (indicate (specify)
quantity) quantity)
Bin/hopper
Blender (dry)
Bulk bags
Bulk truck
Conveyor
Drums
Feeder
Gaylord
Manually dumped bags
Mixer (liquid)
Molding machine
Packaging machine
Railcar
Reactor
Rotary valve
Separator
Silo
Size reduction equip’t
Tank
Weigh hopper
Other:
Please provide dimensions on the diagram similar to your configuration, or sketch it on the grid at bottom.
CONVEYING CAPACITY
WEIGHT:
Min______________ Max______________
n lbs/hr or n kg/hr
VOLUME:
Min______________ Max______________
n ft3/hr or n m3/hr
OPERATIONAL DUTY
n Continuous:
(non-stop running of conveyor)
________ hrs/day ________ days/week
INLET ADAPTERS FLOOR HOPPERS
n Intermittent:
n Metered, Quantity:___________________
(frequent on/off cycling of conveyor)
n Non-metered, Quantity:_______________ HOPPER CAPACITY
Cycle time on:_____________________
n 1 ft3 (28l)
Cycle time off:_____________________
DISCHARGES n 3 ft3 (85l)
n Volumetric batching n Tubular Discharge Valve n 5 ft3 (142l)
Batch weight:_________ n lbs or n kg Quantity:___________________________ n 8 ft3 (225l)
Required batch delivery time: n Full-Flow (Non-Valved) n 14 ft3 (400l)
__________________ minutes Quantity:___________________________ n 20 ft3 (560l)
Batch frequency: ________ batches/day
n Gain-in-weight batching system HOPPER OPTIONS
n Batching size range:_______ to ______ n Solid cover
n lbs or n kg n Hinged cover
n Batching frequency:_______ batches/hr n Cover with inlet port
Batching accuracy required: ±______% n Screen
Number of ingredients being n Bag support tray
weigh-batched:____________________ n Vibrator
n Agitator
CONTROLLERS FOR: n Bag compactor
n Fixed rate conveying
n Variable rate conveying
n Weigh batching
MATERIAL SOURCES AND DESTINATIONS
EXISTING
CONTROL OPTIONS CHECK MATERIAL MATERIAL EQUIPMENT
NEW
n Level sensor ALL SOURCE DESTINATION TYPE
(indicate (indicate (specify)
n On/off timer THAT APPLY quantity) quantity)
n Batch timer Bin/hopper
n Remote operator station
Blender (dry)
EQUIPMENT Bulk bags
n Bulk bag discharger Bulk truck
(also complete pages 1, 2, 10, 11) Conveyor
n Bulk bag filler Drums
(also complete pages 1, 2, 11)
n Bag dump station Feeder
(also complete pages 1, 2, 3) Gaylord
n Drum dumper Manually dumped bags
(also complete pages 1, 2, 3) Mixer (liquid)
n Silo Molding machine
Holding capacity:_______ n ft3 or n m3
Packaging machine
Railcar
Reactor
Rotary valve
Separator
Silo
Size reduction equip’t
Tank
Weigh hopper
Other:
Please provide dimensions on the diagram similar to your configuration, or sketch it on the grid at bottom.
CONVEYING CAPACITY
WEIGHT:
Min_____________ Max______________
n lbs/hr or n kg/hr
VOLUME:
Min_____________ Max______________
n ft3/hr or n m3/hr
OPERATIONAL DUTY
n Continuous:
(non-stop running of conveyor)
________ hrs/day ________ days/week
n Intermittent:
(frequent on/off cycling of conveyor) CONTROL OPTIONS HOPPER CAPACITY
n Level sensor n 1 ft3 (28l)
Cycle time on:________off:__________
n On/off timer n 3 ft3 (85l)
n Volumetric batching
n Batch timer n 5 ft3 (142l)
Batch weight:________ n lbs or n kg
n Remote operator station n 8 ft3 (225l)
Required batch delivery time:
__________________ minutes n 14 ft3 (400l)
EQUIPMENT n 20 ft3 (560l)
Batch frequency: _______ batches/day n Mobile configuration
n Gravimetric batching n Hand-held
n Bulk bag discharger HOPPER OPTIONS pick-up wand
n Loss-of-weight system (also complete pages 1, 2, 10, 11)
n Gain-in-weight system n Solid cover
n Bulk bag filler n Hinged cover
n Batching size range:______ to ______ (also complete pages 1, 2, 11)
n lbs or n kg n Cover with inlet port
n Bag dump station n Screen
n Batching frequency:______ batches/hr (also complete pages 1, 2, 3)
Batching accuracy required: ±_____% n Bag support tray
n Drum dumper n Air fluidizers
Number of ingredients:_____________ (also complete pages 1, 2, 3)
n Agitator
n Silo n Casters
SYSTEM TYPE: Holding capacity:_____ n ft3 or n m3
n Vacuum n Bag compactor
n Positive pressure
CONVEYOR DISTANCE/ELBOWS:
Horizontal:_______________nn ft or n m MATERIAL SOURCES AND DESTINATIONS
n ft or n m
Vertical:__________________n
EXISTING
CHECK MATERIAL MATERIAL EQUIPMENT
NEW
Number of elbows:___________________ ALL SOURCE DESTINATION TYPE
THAT APPLY (indicate (indicate (specify)
quantity) quantity)
CONTROLLERS FOR:
Bin/hopper
n Fixed rate conveying
Blender (dry)
n Variable rate conveying
n Weigh batching Bulk bags
Bulk truck
Conveyor
Drums
Feeder
Gaylord
Manually dumped bags
Mixer (liquid)
Molding machine
Packaging machine
Railcar
Reactor
Rotary valve
Separator
Silo
Size reduction equip’t
Tank
Weigh hopper
Other:
Please provide dimensions on the diagram similar to your configuration, or sketch it on the grid at bottom.
OPTIONS:
n FLOW-FLEXER® bag activator
n POP-TOP™ bag stretching device
(model BFF forklift load only)
n BAG-VAC® dust containment system
n Flow control valve (cinches bag spout
for controlled starting/stopping of flow):
n POWER-CINCHER®
flow control valve
n Iris flow control valve
(not to be used with TELE-TUBE® and SPOUT-LOCK® devices)
n Flexicon Flexible Screw Conveyor
(See “FLEXICON® Flexible Screw Conveyors Quotation Request Form,”
on pages 4 and 5)
n Flexicon Tubular Cable Conveyor
(See “FLEXI-DISC™ Tubular Cable Conveyors Quotation Request Form,”
on pages 6 and 7)
n Flexicon Pneumatic Conveyor
(See “PNEUMATI-CON® Pneumatic Conveying Systems Quotation Request
Form,” on pages 8 and 9)
Also complete “Bulk Bag Specifications,” page 11 Also complete “Bulk Bag Specifications,” page 11
ALL DIMENSIONS OF
SUSPENDED BAG
FRAME TYPE:
n TWIN-CENTERPOST™ design: model BFL
(Fill head is adjustable in height through use of forklift)
n REAR-POST design: model BFR
(Select method for fill head height adjustment):
n Forklift n Manual crank
n Electrically powered
n SWING-DOWN® design: model BFS
(includes powered fill head height adjustment)
FILLING METHOD/INTERFACE:
n Conveyor
n Flexicon Tubular Cable Conveyor
n Flexicon Flexible Screw Conveyor
n Flexicon Pneumatic Conveyor
n Other Conveyor:
(Specify type)_________________________________________
Page 12 ©2013 Flexicon Corporation. FLEXICON Corporation has registrations and pending applications for the trademark FLEXICON throughout the world. Printed in USA