Professional Documents
Culture Documents
For a description of this dialog box, see "Set Output File dialog box" on page 97.
Use this dialog box to specify the types of output files that you want to save. Once you have done
this, you can then write to the output files.
4. Select the CAE Format option, then the Radial surface file LS TS option.
This latter option specifies the collection of a set of curves on the pressure and suction side surfaces
on the blade.
5. In the "Settings" section, set the number of blades on the wheel to 10.
6. In the "Point Spacing" section, select Surface Parameter, and click OK.
7. To use edges in the selection, right-click the project window and choose Selection Level – Edge
from the shortcut menu.