Professional Documents
Culture Documents
Men's waistcoat
It is developed with or without sleeve and collar. Vest with sleeves is worn as a blouse, without
sleeve worn over the skirt and worn inside over coat for smart look.
Now days this style is adapted for all seasons the style of vest is varied from length and loose of
garments, it is classified under length as above waist level, up to the waist level, below waist
level under loose as fitted vest, semifitted vest bolero vest, The vest without sleeve will have a
deep armhole. Under we presented the construction and working method for some type of vest.
Measurements Required:
16 ¾ “ to waist 25”front length 36” chest 33”waist
4-2= ½”
5-4= 1 ¾” square up from 9 to locate 10 and 11
13-12= 1 ½”
15-1=1/2 chest
16-15= 1 ½”
17-16= 1”. Square up 14 to 18. Draw line from 18-10. On this line make 19 from 18, the same as
from 7-11 on the back, less 1/4”
20-19= ½”
21-13=1 ½”
21-22= ¾”. Draw a line from 20-22 and locate 23 half way along this line.
W-10= 2 ½”. Shape the armhole from 20 through 22[hollowing half an inch at 23] and from 11-
24, hollowing half an inch at W square down from 15-25 and from 24 to B
A from 4= ¾”; measure from A-26, half inch waist measure plus 1 ½”.
The amount registered between 25 &26 will be taken at the side seams at point B
27 from B = ¼”
30 from 29= 2 ¼”. Shape the fore part side seam from 24 through 29 to 30
34 from 18 is the full length, less the width of back neck, plus 1” for seams and making up.
M from 1 = ½” less than half the distance between 1 &9; square down to N. mark out a dart,
suppressing 5/8” between R&S, leaving ¼” gap at N.
The collar:
1-0= neck/2
2 is middle of 1-0
1-3= 1”
4-3= 1 ½”
5-4= 3/8”
6-0= 1 ½”
3-5= 1 ½”