Professional Documents
Culture Documents
Fans
Systemair worldwide
Hyderabad, India
DVG/F
Smoke and Heat
Extract Roof Fan
• Smoke and heat extract unit + normal ventilation
• Up to 400°C/120 min (F400/120, F400/90, F300, F200)
• Normal ventilation up to 120°C continuous operation
DVG-H • Vertical exhaust DVG-V or horizontal DVG-H
Horizontal • Includes pre-wired service switch
exhaust
DVG-V • Suitable for coastal applications
Vertical exhaust • Wide range of accessories
• Tested acc. to EN 12101-3 at LGAI, Barcelona
• CE-certified acc. to EN 12101-3, 2002-06 at TÜV Süd
400°C/120min 120°C
The DVG/F smoke extract fans are the 2009/640/EC guideline and IEC DVG 400D4V and motor protective
used in case of fire to extract smoke 60034-30, with protection class IP devices must be bridged to guaran-
gases from rooms, and also during 54, insulation class F. Thermal motor tee functional capability (connection
normal working conditions for stan- protection (PTC or thermal contact direct to mains). For speed control
dard ventilation. Smoke-free escape built-in) on request, in IE2 motors use only combination of frequency
ways increase the chances to rescue serial PTC built-in, in DVG 400D4V inverter and appropriate all pole sine
people in case of a fire. Extraction serial thermal contact built-in. For filter (hot tested at LGAI with inverter
of hot gases reduces damage on frequency controlled single speed and sine filter). If frequency inverter
building and equipment. The casing units up to 0,55 kW PTC must be used in case of fire, PTC must be
is manufactured from seawater ordered (since IE1 motors built-in). bridged and switching on max. speed
resistant aluminium. The base frame For two speed fans (up to 4 kW) two even after eventual short supply cut
consists of galvanised steel. The im- speed switch, S-DT2 SKT/S-DT2 GKT off assured. Operating over 50 Hz is
peller with backward-curved blades is available as accessory (in this case not allowed. Frequency controlled
is manufactured from galvanised thermal contact must be ordered; not units can have additional EMC pro-
steel. Motor outside air stream is suitable for PTC or without thermal tection (available on request).
air cooled. The fan is equipped with contact). In case of fire two speed
IEC standard motors according to switch, eventual speed controller at
Accessories
Technical data
Item No. Model Power at Current Starting Max. airflow R. p. m. Sound pressure Motor Weight Wiring
shaft [A] current [m³/h] [min-1] level at 4/10 m connection [kg] diagram
[kW] [A] [dB(A)] / wiring
Data related to motor and weight can vary due to 400V 3~ 50Hz; continuous operation 120°C; 400°C/120min.
different suppliers. Insulation class motor F; enclosure class motor IP54
Roof Fan DVG 7
Item No. Model Power at Current Starting Max. airflow R. p. m. Sound pressure Motor Weight Wiring
shaft [A] current [m³/h] [min-1] level at 4/10 m connection [kg] diagram
[kW] [A] [dB(A)]
Data related to motor and weight can vary due to 400V 3~ 50Hz; continuous operation 120°C; 400°C/120min.
different suppliers. Insulation class motor F; enclosure class motor IP54
8 Roof Fan DVG
Diagrams
qv [m³/h] qv [m³/h]
4-pole
4-pole
6-pole
6-pole
8-pole
8-pole
qv [m³/s] qv [m³/s]
qv [m³/h] qv [m³/h]
4-pole 4-pole
6-pole 6-pole
8-pole
8-pole
qv [m³/s] qv [m³/s]
qv [m3/h] qv [m3/h]
qv [m3/s] qv [m3/s]
Roof Fan DVG 9
qv [m³/h] qv [m³/h]
6-pole
6-pole
8-pole 8-pole
qv [m³/s] qv [m³/s]
qv [m³/h] qv [m³/h]
6-pole
6-pole
8-pole
8-pole
qv [m³/s]
qv [m³/s]
qv [m³/h] qv [m³/h]
6-pole 6-pole
8-pole
8-pole
qv [m³/s] qv [m³/s]
10 Roof Fan DVG
6-pole
8-pole
DVG-V/F DVG-H/F
S-DT2GKT / SKT
Two speed switch
FRQS/FRQ5S
frequency inverter with integrated
allpole sine filter
FXDM
frequency inverter with integrated
allpole sine filter
Roof Fan DVG 11
Wiring diagrams
L1 L2 L3 PE NO NC L1 L2 L3 PE NO NC L1 L2 L3 PE PTC NO NC
max. 2,5V
Dahlander
L1 L2 L3 PE NO NC L1 L2 L3 PE NO NC W2 U2 V2
D 400V
Delta
connection U1 V1 W1
Y 400V U2 V2 W2 YY 400V U2 V2 W2
High speed High speed
connection connection
U1 V1 W1 U1 V1 W1 L1 L2 L3 PE PTC NO NC
max. 2,5V
WD4 WD6 3 kW
WD7
U2 V2 W2 400V
Y 400V U V W
Star
connection U1 V1 W1
U2 V2 W2 U2 V2 W2 L1 L2 L3 PE PTC NO NC
Y 400V L1 L2 L3 PE NO NC Y 400V max. 2,5V
Star Star
connection U1 V1 W1 connection U1 V1 W1
WD5
4 kW
WD8
U2 V2 W2 W2 U2 V2
Y 400V L1 L2 L3 PE TK NO NC L1 L2 L3 PE PTC NO NC D 400V
Star max. 2,5V Delta
connection U1 V1 W1 connection U1 V1 W1
L1 L2 L3 PE TK NO NC L1 L2 L3 PE PTC NO NC
max. 2,5V
DVG-V
DVG-V
VKG/F
Automatic shutter
SSG/F
Roof baseSilencer
with ASSG/F
silencer Flexible connection
FDG/F
ASG/F Roof base
Silencer
Inlet chamber
VKG/F
Automatic shutter
ASSG/F
Flexible connection
DVG-V
DVG-V
VKG/F
Automatic shutter VKG/F
Automatic shutter