Professional Documents
Culture Documents
MICRO LIGHT
A
Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth
Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth
For utility work, building, construction and groundcare Ditch Maintenance Bucket
Durable design, virtually maintenance free
Sealed for life accumulator
Supplied “Ready to Go” with hoses, hanger bracket, moil and chisel
Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth
980/88424 Manual
Bucket
Part Number Maximum recommended standard flight
Hammermaster
Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth
Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth Part Number Description
522/00900 36 900 N/A Standard N/A 980/89944 Manual Rotation Kerb Grab
980/89943 Kerb Grab installation kit (required with the Kerb Grab above)
Earthdrill Compactor
For trench reinstatement and
general ground compaction
Dipper mounted, ensures the
For accurate and precise
operator is fully protected from
drilling
the effects of vibration
Maximum torque drilling
Connects to the auxiliary circuit,
power 1400Nm
perfectly matched to the machine
Standard 2" hexagon drive hydraulics
Suitable for short flight sizes In-built protection valve
up to 460mm (18") safeguards the unit from
Replacement teeth and pilot accidental reverse flow damage
bits available for greater Suitable for direct or quickhitch
service life mount
980/90864 Compactor
Hammermaster
980/A0166 Manual
A dedicated bucket system designed using FEA that is lighter, strong and durable
Recessed pins enhance tearout performance and eliminate potential foul condition
Longer, flatter base improves flat bottom trenching and provides better fill factor
Side shrouds, welded sidecutters and double strapped teeth give extended
Bucket bucket life
Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth
Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth
Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth
980/A0851 Compactor
Hammermaster
980/A0166 Manual
Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth
Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth
980/A0851 Compactor
Hammermaster
335/09113 Suitable for Kerb Grab and Earthdrill For utility work, building, construction and groundcare
Durable solid body design
Sealed for life accumulator
Excellent power to weight ratio provides maximum performance
Includes moil and chisel
980/90204 Manual Side plate reinforcement offers additional strength and rigidity
Drainage holes reduce weight/density during operation
Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth
Bucket
335/10270 48 1200 0.120 Standard N/A
Earthdrill
Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth
Optional bucket pin kit 340/00569 is available on ALL 803/804/8030/8035 buckets * See section K for details of flights
980/88833 Manual
Hammermaster
Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth
9” bucket requires 2 x bucket pins 990/88201 12” bucket requires 2 x bucket pins 911/16600
* 8060 machine only ** 8052 machine only
Quickhitch Hanger Bracket
Grading Bucket
Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth Part Number Application
980/86061 60 1500 0.220 Standard N/A 335/08502 Suitable for Kerb Grab and Earthdrill
980/86060 72 1800 0.260 Standard N/A
980/88833 Manual
Hammermaster
Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth
980/89817* 9 230 0.040 Standard Standard 980/86061 60 1500 0.220 Standard N/A
980/86060 72 1800 0.260 Standard N/A
Part Number Width (in) Width (mm) Capacity (m3) Duty Teeth
Hammermaster