Professional Documents
Culture Documents
Pump Product Catalog: Experience in Motion
Pump Product Catalog: Experience in Motion
Experience In Motion
Pump Supplier to the World
Flowserve is the driving force in the global Product Brands of Distinction
industrial pump marketplace. No other pump
ACEC™ Centrifugal Pumps
company in the world has the depth or breadth
of expertise in the successful application of Aldrich™ Pumps
pre-engineered, engineered, and special purpose
Byron Jackson ® Pumps
pumps and systems.
Calder™ Energy Recovery Devices
Cameron™ Pumps
Flowserve ® Pumps
IDP ® Pumps
Lawrence Pumps ®
Pacific ® Pumps
Pleuger ® Pumps
Scienco™ Pumps
TKL™ Pumps
Wilson-Snyder ® Pumps
Worthington ® Pumps
Pump Designs
Flowserve offers a wide range of complementary
pump types, built to recognized global standards Committed to the Complete Pump
and customer specification. These include: System Life Cycle
• Single-stage process
• Between bearings single-stage For more than two centuries, Flowserve has
• Between bearings multistage served industries requiring solutions that add
value and reduce costs throughout the life
• Vertical
cycle of a pumping system.
• Submersible motor
• Oil and gas
• Positive displacement
• Chemical
• Nuclear
• Power generation
• Specialty
• Water
• General industry
Available Configurations
Flowserve partners
• Sealed and sealless
with customers to
• Axially and radially split respond to the
• Volute and diffuser dynamic business
• Close coupled and spacer coupled conditions that
• Single and double case affect them and to
improve efficiency, maximize throughput and
control process quality. Whether customer needs
involve on-site technical assistance, equipment
upgrades or broader project planning with full
turnkey responsibility, Flowserve delivers
professional, reliable results.
3
A Guide to Flowserve Pumps
The purpose of this publication is to provide a
brief summary of the hundreds of pumps that Oil and Gas
comprise the Flowserve product line. Pump
models are divided into five sections, beginning
with overhung pumps and continuing through Chemical
specialty designs. Each pump is identified by its
formal designation and accompanied by a full-
color cutaway illustration. Applicable engineering Power
standards are listed along with performance
characteristics and key features. The symbols
shown at right are used to identify each pump’s Water Resources
primary market applications.
Primary Metals
General Industry
4
flowserve.com
Table of Contents
Pump Selection Guide.......................................... 6 – 7 Positive Displacement
Product List.............................................................51
Overhung Pumps Gear.........................................................................52
Product List...............................................................9 Screw.......................................................................53
Chemical Process.............................................10 – 15 Reciprocating...........................................................54
API Process......................................................16 – 18
Slurry and Solids Handling............................... 19 – 22 Specialty Products
Industrial Process............................................. 23 – 25 Product List.............................................................57
Nuclear Pumps and Seals.................................58 – 61
Between Bearings Pumps Extreme Temperature Pumps................................... 62
Product List.............................................................27 Others............................................................... 63 – 65
Single Case — Axially Split — Single-Stage........28 – 29
Single Case — Axially Split — Multistage..................30 Additional Information
Single Case — Radially Split — Single-Stage.............31 Introduction.............................................................67
Single Case — Radially Split — Multistage.........32 – 34 Integrated Solutions Group............................... 68 – 69
Double Case...................................................... 35 – 37 Other Flowserve Products........................................ 70
Reference Sources...................................................71
Vertical Pumps
Product List.............................................................39 Index
Wet-Pit..............................................................40 – 41 Product List...................................................... 72 – 73
Double Case......................................................42 – 43
Submersible............................................................. 44
Slurry and Solids Handling...............................45 – 47
Sump................................................................48 – 49 5
Pump Selection Oil and Gas Power Generation
Guide Downstream Upstream
Chemical Processing (Fossil, Renewables,
Nuclear)
and Pipeline
Condensate Extraction
Boiler Feed Booster
Waste Processing
Slurry Processing
Catalytic Cracking
Pharmaceuticals
Hydrocracking
Gas to Liquids
Cooling Water
Hydrotreating
Acid Transfer
Boiler Feed
Distillation
Polymers
Auxiliary
Solvents
FPSO
Pump
LNG
Category Sub-Category
Overhung Chemical Process — X X X X X X X X X X X X X X X X X X
ASME (ANSI), ISO
API Process X X X X X X X X X X X X X X X X X X X X X X X X
Slurry and Solids X X X X X X X X X X X X
Handling
Industrial Process X X X X X X X X X X X X
Between Single Case — X X X X X X X X X X X X X X X X X X X
Bearings Axially Split
Single Case — X X X X X X X X X X X X X X X X X X
Radially Split
Double Case X X X X X X X X X X X X X
Vertical Wet-Pit X X X X X X X X X
Double Case X X X X X X X X X
Deep Well X X X X X X
Submersible Motor
Slurry and X X X X X X X X X
Solids Handling
Sump X X X X X X X X X X
Positive Gear X X X X X X X X
Displace-
ment Screw X X X X X X X X X X X X X
Multiphase X X
Reciprocating X X X X X X X X
Specialty Nuclear Pumps
Products
Nuclear Seals
Cryogenic Pumps X X
Cryogenic Liquid X
Expander
Geothermal
Deep well
Submersible Pump
Hydraulic Decoking X
Systems
Energy Recovery — X X X
Hydroturbine
Energy Recovery —
DWEER
Thruster X X
CVP Concrete X
Volute Pumps
Barge Pump
Molten Salt
VTP Pump
X
X
X
Geothermal Well Services
X
X
Heat Transfer Fluids
X
X
X
X
Molten Salt Transfer
X
X
Transformer Cooling
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Auxiliary Services
X
X
X
X
X
X
X
X
X
X
X
X
X
Nuclear)
(Fossil, Renewables,
Power Generation
Nuclear Service
X
X
X
X
X
X
X
X
X
X
X
X
Desalination
X
X
X
X
X
X
Flood Control
X
X
X
X
X
X
X
Groundwater Development and Irrigation
X
X
X
X
Sewage Collection and Treatment
X
X
X
X
X
X
X
X
Water Supply and Distribution
Water Resources
X
X
X
X
X
X
X
X
X
Water Treatment
X
X
X
X
X
Cooling Water
X
X
X
X
Descaling
X
X
X
X
X
Hydraulic Press
X
X
X
X
Plating, Galvanizing and Other Coatings
Primary Metals
X
X
X
X
Scale Recycle
X
X
X
X
X
X
X
X
X
X
X
X
X
Leaching Acid
X
X
X
X
X
Mining
Primary Processing
X
X
X
X
Slurry Transfer
X
X
X
X
Bleach Chemical
X
X
X
X
X
X
X
X
Boiler Feed
X
X
X
X
X
X
X
X
X
X
Coatings
X
X
X
Digester
Pulp and Paper
X
X
X
X
Paper Stock
X
Shower Pumps
X
X
X
X
X
X
X
X
X
X
X
X
X
Automotive
X
X
X
X
X
X
X
X
X
X
X
X
Agriculture
X
X
X
X
X
X
X
X
X
X
X
X Construction
X
X
Industrial Gases
X
X
X
X
X
X
X
X
X
X
X
X
X
Electronics
X
X
X
X
X
X
Fire Protection
X
X
X
X
X
X
X
X
X
X
X
X
Food Processing
General Industry
X
X
X
X
X
X
X
HVAC
X
X
X
X
X
X
X
X
X
X
X
OEM
X
X
X
Shipping
flowserve.com
X
X
X
X
X
X
Snowmaking
Overhung Pumps flowserve.com
Chemical Process
Mark 3™ ASME Standard 10
Mark 3 Lo-Flo™ 10
Mark 3 Unitized Self-Primer 10
Mark 3 Recessed Impeller 11
Overhung Pumps
Mark 3 In-Line 11
Guardian Magnetic Drive 11
Mark 3 ISO Standard 12
Mark 3 ISO Self-Priming 12
Mark 3 ISO Recessed Impeller 12
Mark 3 ISO Close Coupled 13
CPXV Chemical Sump 13
CPXS Magnetic Drive 13
PolyChemTM GRP 14
PolyChem VGRP 14
PolyChem S-Series 14
PolyChem M-Series 15
Polyshield 15
Polybase 15
API Process
HPX 16
HPXM 16
PHL 16
ERPN 17
PVXM 17
HWMA 17
PVML 18
MSP 18
DSVP 18
Slurry and Solids Handling
M 19
R 19
Titan Slurry™ 19
LC 20
MND 20
MNR 20
FRBH 21
FRBHJC 21
MPT 21
MF 22
MN 22
MSX 22
Industrial Process
D800 23
MEN 23
MENBLOC 23
ME 24
DS 24
SMP 24
SMX 25
F-Line 25
MVE 25
9
Mark 3 ASME Standard Mark 3 Lo-Flo Mark 3 Unitized
Self-Primer
Overhung — Chemical Process
15
HPX (OH2) HPXM (OH2) PHL (OH2)
Centerline Mounted Centerline Mounted, Centerline Mounted
Low-Flow
Overhung — API Process
18
M R Titan Slurry
Hard Metal, Radially Split, Heavy-Duty, Radially Split,
Abrasive Slurry Rubber-Lined Slurry Lined Slurry
Related Configurations
• PL-C cantilever, chemical
slurry sump
• LC-S lineshaft, chemical
slurry sump
20 See Bulletin PS-10-11.
FRBH FRBHJC MPT
Heavy-Duty Paper Stock Cantilever Sump Self-Priming,
and Process Solids Handling
Related Configurations
• FRBHJC cantilever sump
• FRBHJ sump
24
SMX F-Line MVE
Non-Metallic End Suction, Multistage End Suction
Standard Motor
25
Between Bearings Pumps
Single Case — Axially Split —
Single-Stage
LR 28
LNN 28
27
LR LNN DVSH (BB1)
Axially Split, Single-Stage Axially Split, Double- Axially Split, Double-
Suction, Single-Stage Suction, Single-Stage
OverhungBearings
Between – General
— Industry
Single Case — Axially Split — Single Stage
OverhungBearings
Between – General
— Industry
Single Case — Axially Split — Single Stage
Standards
• ISO 13709/API 610 (BB1), latest ed.
Operating Parameters
• Flows to 15 000 m3/h (65 000 gpm)
• Heads to 250 m (820 ft)
• Pressures to 25 bar (365 psi); 50 bar
(725 psi) with LPN-H model
• Temperatures from -80°C (-110°F)
to 204°C (400°F)
Features
• Double volute, near-centerline
supported casing
• ASME (ANSI) B16.5 Class 150 or
Class 300 raised face flanges
• Confined gasket design
• Hydraulically balanced double-
suction impeller
• ISO 21049/API 682 seal chambers
• Baseplate designs and pump
packages engineered to contract
• Heavy-duty, bracketed, 180°
supported carbon steel bearing
housing
• Standard non-contacting labyrinth seals
• Choice of bearings
−−Ball radial and ball thrust with oil
flinger system
−−Split sleeve radial and ball thrust
with ring oil system
−−Split sleeve radial and tilting pad
thrust with pressure lubrication
Other Configurations
• LPN-H high-pressure, double-suction
• LPN-V vertical in-line
OverhungBearings
Between – General
— Industry
Single Case — Radially Split — Single-Stage
Standards Standards Standards
• ISO 13709/API 610 (BB2), latest ed. • ISO 13709/API 610 (BB2), latest ed. • ISO 13709/API 610 (BB2), latest ed.
OverhungBearings
Between – General
— Industry
Single Case — Radially Split — Multistage
Standards Standards Standards
• Flowserve • Flowserve • Flowserve
33
CSX WXH
Radially Split, Radially Split, Multistage,
Multistage, Ring Section High-Pressure,
Ring Section
OverhungBearings
Between – General
— Industry
Single Case — Radially Split — Multistage
Standards Standards
• Flowserve • Flowserve
34
WXB and WXB-B WNC CSB
Diffuser Casing, Diffuser Casing, Diffuser Casing,
Multistage, Process Barrel Multistage, Utility Barrel Multistage, Utility Barrel
OverhungBearings
Between – General
— Industry
Double Case
Standards Standards Standards
• ASME Section VIII • ASME Section VIII • ASME Section VIII
OverhungBearings
Between – General
— Industry
Double Case
Standards Standards Standards
• ISO 13709/API 610 (BB5), latest ed. • ISO 13709/API 610 (BB5), latest ed. • ISO 13709/API 610 (BB5), latest ed.
Vertical Pumps
VCT 41
AFV 41
CVP 41
Double Case
QLC 42
QLQC 42
VPC 42
WUC 42
APKD 43
Submersible
Pleuger SUBM 44
Byron Jackson SUBM 44
MSX 44
Slurry and Solids Handling
MVX 45
MFV 45
MNV 45
FRBHJC 46
MJ 46
MJC 46
RJ 46
RJC 46
Terra-Titan™ 47
MSX 47
Drain-Titan™ 47
Sump
CPXV Chemical Sump 48
ESP3 Chemical Sump 48
PolyChem VGRP 48
Drain-Titan 49
VSMP 49
ECPJ 49
39
WUJ (VS1) VTP QL and QLQ
Vertical Lineshaft, Vertical Turbine Vertical, Double-Suction,
Multistage Double Volute
Vertical — Wet-Pit
Vertical — Wet-Pit
Standards Standards Standards
• Hydraulic Institute • Flowserve • Flowserve
• AWWA • Hydraulic Institute
Operating Parameters
Operating Parameters • Flows to 181 700 m3/h Operating Parameters
• Flows to 181 700 m3/h (800 000 gpm) • Flows to 200 000 m3/h (800 000 gpm)
(800 000 gpm) • Heads to 11 m (35 ft) • Heads to 60 m (197 ft)
• Heads to 110 m (350 ft) • Speeds to 1770 rpm
• Sizes from 1200 mm (48 in) to • Sizes from 200 mm (8 in) to Features
3380 mm (133 in) 3.1 m (123 in) • Vertical dry-pit design
• Settings to 8 m (25 ft) • Removable metallic pump pullout
Features unit within a concrete volute
• Five-mitered elbow discharge head Features • Suction bell connected to preformed
with above- or below-grade discharge • Three- or four-vane axial flow design high-efficiency, vortex-free concrete
• Pullout or non-pullout construction • Cast or fabricated bowl assembly suction box
• Flanged outer column with integral • Flanged outer column pipe with • Open mixed flow and closed mixed
bearing bracket integral bearing bracket flow impeller options
• Enclosed or semi-open impellers • Oil, freshwater or self-lubricating • Dry shaft design
• Oil, freshwater or self-lubricating lineshaft construction • No submerged bearings
column construction • Fabricated discharge with mitered • Bearings and sealing systems
• Seal chamber accepts packing or elbow easily accessible
mechanical seal • Above- or below-ground discharge • Prefabricated concrete segments
• Three-piece rigid, adjustable • Multiple drive options • Highly corrosion and erosion resistant
motor coupling −−Solid or hollow shaft motor • Liquidyne® or mechanical shaft seal
• Shaft sleeves under the bearings and −−Steam turbine • Inflatable static seal
seal chamber −−Diesel engine • Engineered to customer specifications
• Options • Options
– Discharge head with integral axial −−Casing liners Available Configurations
thrust bearing assembly −−Integral axial thrust bearing • BSV open mixed flow impeller design
– Cast or fabricated bowl assembly assembly • BCV closed mixed flow impeller design
– Integrated suction bell bearing
bracket See Bulletin PS-40-3. See Bulletin PS-40-1.
– Multiple stages ® Liquidyne is a registered trademark of IHC.
– Thrust collar
– Sand cap
• Engineered to customer specifications
Operating Parameters
• Flows to 4600 m3/h (20 200 gpm)
• Heads to 500 m (1640 ft)
• Pressures to 50 bar (725 psi)
• Temperatures from -18°C (0°F)
to 95°C (200°F)
• Speeds to 1800 rpm
Features
• Double-suction, first-stage impeller
• Double case construction
• Impellers keyed with lock collars
• Double volute casing
• Heavy-duty discharge head
• Open lineshaft construction
• Flanged column assembly with
bearing retainers
• Large shaft with keyed lineshaft
couplings
• Mechanically sealed
• Rigid, adjustable flanged coupling
• Solid shaft motor with NEMA or IEC
thrust bearing
• Optional suction can drain
Related Configurations
• APKC single-suction design
43
Pleuger SUBM Byron Jackson SUBM MSX
Deep-Well Submersible Deep-Well Submersible Solids Handling,
(Water-Filled Design) (Oil-Filled Design) Submersible
Vertical — Submersible
47
CPXV ESP3 PolyChem VGRP
Chemical Sump Chemical Sump Engineered Polymer
Composite Sump
Vertical — Sump
Vertical — Sump
Standards Standards Standards
• Flowserve • Flowserve • ISO 13709/API 610 (VS4), latest ed.
Positive Displacement
Screw
TSP 53
MP1 53
MP1 Systems Packaging 53
Reciprocating
YHT 54
HS 54
VTE 54
VQE 54
V 54
VSE 54
51
GR Series GA Series Gearex
Double Helical, Gear Double Helical, Gear Double Helical,
Timed Gear
OverhungDisplacement
Positive – General Industry
— Gear
Overhung
Positive Displacement
– General Industry
— Screw
Standards Standards Standards
• API 676, latest ed. • API 676, latest ed. • Flowserve
• ASME
Operating Parameters Operating Parameters
• Flows to 2550 m3/h (11 200 gpm) • Flows to 2255 m3/h (9617 gpm) Features
• Pressures to 100 bar (1450 psi) • Pressures to 50 bar (720 psi) • Standard or custom engineered
• Temperatures to 450°C (842°F) • Temperatures to 450°C (842°F) system packaging available
• Speeds to 1800 rpm • Speeds to 2000 rpm • Driver options
• Viscosities to 55 million cP • Viscosities to 8000 cP −−Electric motor
• Slurry concentrations to 70% • Multiphase pumping to 100% GVF −−Electric motor with variable speed
by weight (gas volume fractions) drive (VSD)
−−Diesel or natural gas engine
Features Features • Complete piping systems
• Positive displacement timed • Non-contacting design with −−Suction, discharge, bypass and
two-screw one-piece pump shafts recycle piping
• Double-suction design • Three pumping locks for low −−Block, control and check valves
• Split bearing bracket for ease pulsation flow −−Filters and strainers
of maintenance • Through-bolt bearing bracket design −−Pressure, temperature and flow
• Versatile ISO 21049/API 682 • ISO 21049/API 682 seal chamber instrumentation
compliant stuffing box design with split brackets accommodates • Complete, integrated control systems
• Integral or pinned screw elements single and double cartridge seals −−PLC-based
• Spur-tooth timing gears • Double-suction design with low −−Controls for pump, valves,
• Chrome-plated pump bores NPSH capability instrumentation and alarms,
• Options • AGMA 11 helical timing gears VSD, etc.
– Fully external bearings and • Chrome-plated bores and −−Motor control center
timing gears hard-coated screws • Single and multiple skid options
– Internal bearings and timing gears • Options for integration of controls, pump
– Temperature control packages −−Multiple hard coatings for bores and piping
– Hopper-top construction and screws • Special enclosures for arctic-
– Vertical barge configuration −−Choice of materials, including NACE like conditions or other harsh
– Choice of materials −−Customized pitch environments
– Multiple hard coatings for bores −−Customized packaging
and screws −−Variable speed drive
−−Natural gas or diesel engine drive
See Bulletin PS-60-1.
Other Configurations
• High pressure: 100 bar (1450 psi)
Standards Standards
• API 674, latest ed. • API 674, latest ed.
• ASME section III • ASME section III
Features Features
• Self-aligning plungers • Outboard packed inverted design
• Sectionalized fluid end components • Easily accessible stuffing box
• Fully enclosed power end with • Integrated suction and discharge
generous oil reservoir manifold
• Independent crosshead extension rod • Complete separation of liquid end
• Integrally cast and precision-machined from power end
cylindrical crosshead guides • Valve design suitable for conditions
• Triple lip seal at crosshead extensions of service
• Fully reversible crankshaft for V-belt • Spherical feature for plunger alignment
drive or direct coupling • Power-end maintenance
• Stuffing box assemblies individually inspection covers
bolted to fluid cylinder • Forced feed lubrication
• Splash-type or full-pressure • Options
lubrication system −−Spring-loaded packing
• Threaded primary drain −−Pulsation dampeners
• Options −−Sectionalized fluid ends
– Overhead motor mounting
– Spring-loaded stuffing box See Bulletin PS-70-1.
– Discharge pulsation dampeners
55
Specialty Products
Nuclear Pumps and Seals
DFSS 58
DVSS 58
N-Seal 58
WDF 58
Specialty Products
DVSR 59
CN 59
HDR 59
CA 60
CAM 60
CAV 60
EG 61
MEV 61
Extreme Temperature
WUC-LNG Cryogenic 62
VKW Cryogenic 62
TKW Cryogenic 62
Byron Jackson 62
SUBM Geothermal
Others
Hydraulic Decoking Systems 63
IPS Products 63
Pleuger WFSD 64
Azimuthing Thruster
DWEER™ 64
ERT 64
CVP 65
Barge Pump 65
Molten Salt VTP 65
57
DFSS and DVSS N-Seal WDF Nuclear
Nuclear Radially Split, Nuclear Mechanical Seals Vertical, Single-Stage
Single-Stage
Overhung Products
Specialty – General
— Industry
Nuclear Pumps and Seals
Overhung Products
Specialty – General
— Industry
Nuclear Pumps and Seals
Standards Standards Standards
• ASME Section VIII • ASME Section VIII • ASME Section VIII
59
CA Nuclear CAM Nuclear CAV Nuclear
Diffuser Casing, Diffuser Casing, Vertical, Double Case,
Multistage, Utility Barrel Multistage, Utility Barrel Multistage
Overhung Products
Specialty – General
— Industry
Nuclear Pumps and Seals
60
EG Nuclear MEV Nuclear
Radially Split, Vertical, Single-Stage
Double-Suction
Overhung Products
Specialty – General
— Industry
Nuclear Pumps and Seals
Standards Standards
• ASME Section III, Class 3 • ASME Section III, Class 3
Features Features
• Cast volute casing • Cast casing and cover
• Double cover design • Bottom suction, horizontal discharge
• Double-suction impeller configuration
• Centerline mounting • Single-stage, enclosed impeller
• Side suction and side discharge • Fabricated motor stand
located above the mounting feet • Cartridge mechanical seal
• Cartridge mechanical seal • Radial roller and double ball
• 360° bearing housings thrust bearings
• Ball radial and ball thrust bearings • Grease-lubricated bearings
61
WUC-LNG Cryogenic (VS6) VKW and TKW Cryogenic Byron Jackson SUBM
Vertical, Double Case, Liquid Expander (VS6) Geothermal Deep-Well
Multistage Double Case, Multistage, Submersible
Electric Generator
Overhung Products
Specialty – General
— Industry
Extreme Temperature Pumps
Overhung Products
Specialty – General
— Industry
Others
Flowserve Automated Hydraulic • Provides greater system automation Intelligent Process Solutions (IPS)
Decoking Systems and improved efficiency while • Family of equipment monitoring
• Increase delayed coking unit (DCU) improving operator safety, reducing and control products that helps to
capacity and improve operator safety cycle time and easing maintenance proactively manage plant assets
• Installed in more than 95% of the • Mode shifting helps to free impeded −−Collect key system parameters
world’s DCUs tools from slumped beds −−Analyze and synthesize data into
• Complete systems with virtually all actionable information
equipment needed to operate and Advanced Cutting Control −−Protect process equipment via
control the hydraulic decoking process • Complete systems and enclosures automated responses
• Extensive aftermarket support to monitor and control the operations −−Transmit information to enable a
including specialists to evaluate • Continuous feedback signals timely manual response
system performance, improve indicate equipment and drum status • Increase uptime
reliability, and recommend operational (i.e., position in drum, rotational • Reduce operating costs
and safety best practices speed, wore rope tension, etc.)
• Embedded intelligence to process IPS Wireless
Complete Coke Cutting Systems data for monitoring and control; • Cost-effective and scalable data
• Jet pump train: ISO 13709/API 610 operator interface only required acquisition system
(BB5) jet pump, driver, lube oil skid for sequence exception • Open platform architecture
and control system panel • Video and acoustic equipment to • Omni-directional technology
• Coke cutting system: decoking monitor cutting deck operations and
control valve, AutoShift™ combination coke chute conditions IPS APEX
cutting tool, rotary joint, isolation and • Remote winch and rotary joint • Advanced diagnostics
bleed valves, drill stem, tool guide and operation • Intelligent control algorithms protect
enclosure and high-pressure hose • Remote sensing of cutting jet against high-risk process conditions
• Cutting assembly lifting system: impingement on the coke drum
crosshead, free-fall arresters, winches • Interlocking safety systems IPS Tempo
and winch controls, pulley blocks, • IPS APEX™ data monitoring, • Variable frequency drive
and latch mechanism to stow transmission and control systems • Intelligent system optimization
the crosshead
• Automation, controls and Online Assurance Programs IPS Power Monitor
instrumentation • Access to data aggregation tools via • Monitors actual power usage
the Technology Advantage™ Portal • Programmable start-up delay and
AutoShift Combination Cutting Tool • Enable experts to monitor, diagnose low and high trip points
• Removes the operator from the and communicate operating
cutting deck solutions to increase unit uptime See Bulletin PS-90-11.
• Mode shifting is accomplished
automatically and remotely by water See Bulletin PS-90-6.
pressurization and depressurization
63
Pleuger WFSD DWEER TM
ERT
Azimuthing Thruster Dual Work Exchange Energy Recovery Turbine
Energy Recovery
Overhung Products
Specialty – General
— Industry
Others
Overhung Products
Specialty – General
— Industry
Others
Standards Standards Standards
• Flowserve • Flowserve • Flowserve
• Hydraulic Institute
Operating Parameters Operating Parameters
Operating Parameters • Flows to 1020 m3/h (4500 gpm) • Flows to 13 600 m3/h (60 000 gpm)
• Flows to 200 000 m3/h (800 000 gpm) • Heads to 185 m (600 ft) • Heads to 530 m (1740 ft)
• Heads to 60 m (197 ft) • Pressures to 8.6 bar (125 psi) • Pressures to 100 bar (1450 psi)
• Temperatures from -30°C (-20°F) • Temperatures to 600°C (1100°F)
Features to 230°C (450°F) • Settings to 20 m (65 ft)
• Vertical dry-pit design • Discharge flanges to 250 mm (10 in)
• Removable metallic pump pullout Features
unit within a concrete volute Features • Low pump submergence allows for
• Suction bell connected to preformed • Pollution prevention design greater energy generation
high-efficiency, vortex-free concrete • Discharge head with access ports • Low NPSHR for enhanced suction
suction box • Rabbeted-fit motor shaft to headshaft performance
• Open mixed flow and closed mixed • 1.5 m (5 ft) column pieces with • Excellent heat dissipation prevents
flow impeller options integrally fabricated bearing support distortion at high temperatures
• Dry shaft design • Automatic stuffing box bleed-off • Advanced fluid sealing system
• No submerged bearings and valved drain line • Materials engineered to equalize
• Bearings and sealing systems • Special low NPSH priming thermal growth and forestall distortion
easily accessible stage impeller • Wet-pit or tank-mounted
• Prefabricated concrete segments • Semi-open series stage impeller • Dynamically balanced enclosed
• Highly corrosion and erosion resistant • Automatic air separation chamber impellers
• Liquidyne® or mechanical shaft seal with continuous seal • Flanged column pipe with open
• Inflatable static seal lineshaft construction
• Engineered to customer specifications See Bulletin PSS-40-7.2. • Product lubricated bearings
• Cooling fan/disc
Available Configurations • Drain tubes
• BSV open mixed flow impeller design • Other options
• BCV closed mixed flow impeller design −−Integral axial thrust bearing
−−Thrust-balanced impeller
See Bulletin PS-40-1. −−Coupling bellows
® Liquidyne is a registered trademark of IHC.
−−ISO 13709/API 610 construction
Related Configurations
• FRBHJC cantilever sump
• CPXV chemical sump
Additional Information
67
Services and Solutions for the Global Infrastructure Markets
The business and operational challenges within
a process plant are numerous. Plant operators
face the pressures of increased productivity and
profits that are seemingly at odds with the every-
day realities of decreased operating budgets,
rising energy costs and increasing operational
costs. But Flowserve Services and Solutions can
help relieve the stresses and reduce the life cycle
90%
Operating Cost
68
flowserve.com
70
flowserve.com
Reference Sources
FlowSelex™ Interactive Pump Cameron Hydraulic Data
Selection Application First published in 1926 and now in
FlowSelex is a Web-based interactive pump selection its 19th edition, the Cameron
program that allows users to access an extensive Hydraulic Data book is an
database of Flowserve pump sizing information indispensable aid to engineers
anytime, anywhere. involved with the specification,
selection and application of pumping
This versatile tool delivers a wide range of information, equipment. This comprehensive
from pump descriptions and operating parameters to reference tool includes:
custom application package specifications with
• Hydraulic principles and formulae
supporting technical documentation, including:
• Friction data
• Performance curves • Properties of common liquids
• Hydraulic data sheets • Steam and electrical data
• General arrangement drawings • Weights, dimensions, and ratings of pipe
• Construction data sheets flanges and fittings
• Metric conversions
FlowSelex can be accessed at
www.Flowserve.com/FlowSelex. To obtain a copy of the Cameron Hydraulic Data
book, visit: www.cameronbook.com.
71
Index
A E L
AFV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 EC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 LC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
APKC (see APKD) . . . . . . . . . . . . . . . . . . . . . . . 43 ECPJ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 LLR (see LR) . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
APKD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 EG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 LNN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
ERPN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 LPN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
B ERT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 LR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Barge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 ESP3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 LRV (see LR). . . . . . . . . . . . . . . . . . . . . . . . . . . 28
BCV (see CVP). . . . . . . . . . . . . . . . . . . . . . . 41, 65
BP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 F M
BSV (see CVP). . . . . . . . . . . . . . . . . . . . . . . 41, 65 F-Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Byron Jackson SUBM (Geothermal). . . . . . . 62 FRBH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Mark 3 ASME Standard. . . . . . . . . . . . . . . . 10
Byron Jackson SUBM (Oil-Filled Design). . . 44 FRBHJC . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 46 Mark 3 In-Line (ASME) . . . . . . . . . . . . . . . . 11
Mark 3 ISO Close Coupled. . . . . . . . . . . . . 13
C G Mark 3 ISO Recessed Impeller. . . . . . . . . 12
CA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 GA Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Mark 3 ISO Self-Priming. . . . . . . . . . . . . . . 12
CAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Gearex. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Mark 3 ISO Standard . . . . . . . . . . . . . . . . . . 12
CAV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 GR Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Mark 3 Lo-Flo (ASME). . . . . . . . . . . . . . . . . 10
CHTA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Guardian. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Mark 3 Recessed Impeller (ASME) . . . 11
CN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Mark 3 Unitized Self-Primer (ASME). . . 10
CPXS Magnetic Drive. . . . . . . . . . . . . . . . . . 13 H
ME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPXV Chemical Sump. . . . . . . . . . . . . . 13, 48 HDB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 MEN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
CSB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 HDO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 MENBLOC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
CSX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 HDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 MEV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
CVP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41, 65 HDX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 MF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
HDX-TT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 MFV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
D HED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 MJ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
D800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 HED-DS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 MJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
DFSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 HPX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 MN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
DMX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 HPXM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 MND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Drain-Titan. . . . . . . . . . . . . . . . . . . . . . . . 47, 49 HS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 MNR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
DS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 HSB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 MNV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
DSVP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 HSO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Molten Salt VTP. . . . . . . . . . . . . . . . . . . . . . . 65
DVSH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 HWMA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 MP1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
DVSR (non-nuclear). . . . . . . . . . . . . . . . . . . 31 HWMA2 (see HWMA). . . . . . . . . . . . . . . . . . . . 17 MP1 Systems Packaging . . . . . . . . . . . . . . 53
DVSR (nuclear) . . . . . . . . . . . . . . . . . . . . . . . 59 Hydraulic Decoking Systems. . . . . . . . . . . 63 MPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
DVSS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
DWEER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 I
IPS Products. . . . . . . . . . . . . . . . . . . . . . . . . . 63
72
flowserve.com
MSP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 R VSMP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
MSP2 (see MSP). . . . . . . . . . . . . . . . . . . . . . . . 18 R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 VTE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
MSX. . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 44, 47 RJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 VTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
MVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 RJC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
MVX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 W
S WCC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
N WD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SMP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
NM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 SMX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 WDF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
N-Seal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 SUBM WDX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
(see Byron Jackson SUBM or Pleuger SUBM) . . 44 WFSD Thruster
P (see Pleuger WFSD Azimuthing Thruster) . . . . . 64
PHL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 WIK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Pleuger SUBM (Water-Filled Design) . . . . 44 T WIKO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Pleuger WFSD Azimuthing Thruster. . . . 64 Terra-Titan. . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 WMA (see HWMA). . . . . . . . . . . . . . . . . . . . . . . 17
Polybase. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Titan Slurry. . . . . . . . . . . . . . . . . . . . . . . . . . . 19 WMA2 (see HWMA) . . . . . . . . . . . . . . . . . . . . . 17
PolyChem GRP . . . . . . . . . . . . . . . . . . . . . . . 14 TKW Cryogenic Liquid Expander. . . . . . . 62 WNC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
PolyChem M-Series. . . . . . . . . . . . . . . . . . . 15 TSP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 WNC-HP (see WNC). . . . . . . . . . . . . . . . . . . . . 35
PolyChem S-Series. . . . . . . . . . . . . . . . . . . . 14 WTB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
PolyChem VGRP . . . . . . . . . . . . . . . . . . . 14, 48
U WUC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Polyshield . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 UZDL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 WUC-LNG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
PVML. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 WUJ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
V
PVXM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 WX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
WXB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Q VCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
WXB-B (see WXB). . . . . . . . . . . . . . . . . . . . . . . 35
QL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 VKW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
WXH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
QLC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 VPC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
QLQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 VQE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Y
QLQC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 VSE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 YHT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
73
USA and Canada
Flowserve Corporation
5215 North O’Connor Blvd.
Suite 2300
Irving, Texas 75039-5421 USA
Telephone: +1 937 890 5839
Latin America
Flowserve Corporation
Martín Rodriguez 4460
B1644CGN-Victoria-San Fernando
Buenos Aires, Argentina
Telephone: +54 11 4006 8700
Telefax: +54 11 4714 1610
Asia Pacific
Flowserve Pte. Ltd.
10 Tuas Loop
Singapore 637345
Telephone: +65 6771 0600
Telefax: +65 6862 2329
flowserve.com