Professional Documents
Culture Documents
REPAIR CLASS
CLASS A
CLASS B
CLASS C
REPAIR CATEGORY
MINOR
MAJOR
REPLACEMENT
GENERAL SERVICES:
Pick up & Delivery
Review of MSDS
Photograph as received condition
Verify & document as received calibration
Verify & document as received bench range
Metal stamp separation points of body & actuator
Body:
Complete disassembly of body assembly
Sand blast and/or solvent wash all components
Identify welding & machining requirements for body & bonnet
Identify welding & machining requirements for trim components
Replacement of all soft goods: gaskets, packing, seals, etc
Replacement of body studs & nuts
Paint per WASKITA of customer specification
Assemble valve
Actuator:
Complete disassembly of actuator
as required
Sand blast or solvent wash all components
Paint per WASKITA or customer specification
Replace all soft goods: diaphragm, orings, seals, packing, etc
Reassemble with new fasteners X as required
Set bench range
Instrumentation:
Disassemble as required
Sand blast or solvent wash components
Replace all soft goods: diaphragm, orings, gaskets, etc.
Replace gauges
Paint per WASKITA or customer specification
Reassemble
Valve Assembly & Test
Assemble body s/a, actuator, & instrumentation
Replace tubing with new per customer specifications
Perform & document calibration testing
Perform & document seat test per Standard Specification
Perform & document hydrotest per Standard Specification
Perform & document performance signature