Professional Documents
Culture Documents
All Reader variants will read card serial numbers from most
ISO 14443A smart cards which have a 4-byte UID (User
Identification), including smartMAX encoded MIFARE cards.
Supports SmartMAX on Desfire EV1/EV2.
Note:
For additional information regarding the installation, configuration and proper use of this product:
Symmetry User Guide, P/N 9600-0429
?
EN-1DBC+ and EN-2DBC - Installation Guide, P/N 9600-0630
?
M2150 Access Control Design Guide, P/N 9600-0420
?
EN-DBU Installation Guide, P/N 9600-0660.
?
Package Contents
The package should be delivered free from visible damage and include the following contents:
Symmetry Blue 933M, 933M-KP, 934M, 934M-KP, 939M or 939M-KP Wallplate/Keypad Reader & backplate.
?
9600-0697 Symmetry Blue 933M 934M and 939M Reader Installation Leaflet (this document).
?
Install package 2 x Phillips #6 screws, 1 x #4-40 Phillips screw and 1 x T8 pin-in-torx.
?
If any of the items are missing or damaged please contact the supplier immediately.
Brown -
200' (60m) 22
Green Rx-
Twisted pairs
(Use Belden 9503) Connect shield at controller
end only.
Installation tips:
Upon a power reset, the S900 Readers provide a reset sequence using the LED indicator and the beeper, to
provide information about the reader type and its communication mode. The first sequence (sequence A)
describes the credential technologies built into the reader:
A single red LED flash indicates Bluetooth credential support
?
A single green LED flash indicates 13.56 MHz credential support
?
A single amber LED flash indicates 125 kHz Prox credential support
?
Sequence A is followed by sequence B. Sequence B indicates the reader communication protocol:
One beep (with 3 x Green LED Flashes) indicate that the reader is in 20mA communication mode.
?