Professional Documents
Culture Documents
FACTORIES ACT
Arrangement of Provisions
1 Citation.
2 Definitions.
3 Deleted by S 135/2006, wef 01/03/2006.
4 Fee for special services.
4A Fee for approval of third party inspection agency
4B Fee for registration as approved scaffold contractor
4C Fee for approval of crane contractor
4D Fee for approval of approved person or authorised boiler inspector
5 Fee for registration as safety officer.
6 Government departments exempted.
7 Reports and certificates.
8 Notice to attend court.
FIRST SCHEDULE
SECOND SCHEDULE
THIRD SCHEDULE
REPUBLIC OF SINGAPORE FACTORIES ACT (CHAPTER 104) FACTORIES
(REGISTRATION AND OTHER SERVICES — FEES AND FORMS) REGULATIONS
-1-
FACTORIES ACT (CHAPTER 104, SECTION 102 (1))
FACTORIES (REGISTRATION AND OTHER SERVICES — FEES AND FORMS) REGULATIONS
Actual Provisions
Citation.
1. These Regulations may be cited as the Factories (Registration and Other Services —
Fees and Forms) Regulations.
Definitions.
2. In these Regulations, unless the context otherwise requires —
"construction worksite" means a factory in which building operations or works of
engineering construction are carried on;
"shipyard" means a factory in which ships or other floating structures are constructed,
reconstructed, repaired, refitted, painted, finished or broken up.
-2-
FACTORIES ACT (CHAPTER 104, SECTION 102 (1))
FACTORIES (REGISTRATION AND OTHER SERVICES — FEES AND FORMS) REGULATIONS
-3-
FACTORIES ACT (CHAPTER 104, SECTION 102 (1))
FACTORIES (REGISTRATION AND OTHER SERVICES — FEES AND FORMS) REGULATIONS
FIRST SCHEDULE
PART I
PART II
Regulation 4
Fees in respect of special services:
$
1. Steam boiler.
(a) Examination of and report on a steam boiler when cold
where the heating surface is —
(i) not more than 5 sq.m. 60.
(ii) more than 5 sq.m. but not more than 10 sq.m. 70.
(iii) more than 10 sq.m. but not more than 25 sq.m. 115.
(iv) more than 25 sq.m. but not more than 50 sq.m. 150.
(v) more than 50 sq.m. but not more than 100 sq.m. 200.
(vi) more than 100 sq.m. but not more than 250 sq.m. 245.
(vii) more than 250 sq.m. but not more than 1,000 sq.m. 290.
(viii) more than 1,000 sq.m. 350.
(b) Hydrostatic test on a steam boiler where the heating
surface is —
(i) not more than 5 sq.m. 30.
(ii) more than 5 sq.m. but not more than 10 sq.m. 35.
(iii) more than 10 sq.m. but not more than 25 sq.m. 60.
(iv) more than 25 sq.m. but not more than 50 sq.m. 75.
(v) more than 50 sq.m. but not more than 100 sq.m. 100.
(vi) more than 100 sq.m. but not more than 250 sq.m. 120.
(vii) more than 250 sq.m. but not more than 1,000 sq.m. 210.
(viii) more than 1,000 sq.m. 260.
(c) Inspection of the layout of a steam boiler prior to 35.
registration
(d) Inspection while a steam boiler is being installed 35.
(e) Inspection while a steam boiler is under steam pressure 35.
(f) Inspection of a damaged steam boiler to determine nature 35.
of repair
(g) Inspection of materials to be used for repair of a steam 35.
boiler
(h) Inspection while a steam boiler is being repaired 35.
-4-
FACTORIES ACT (CHAPTER 104, SECTION 102 (1))
FACTORIES (REGISTRATION AND OTHER SERVICES — FEES AND FORMS) REGULATIONS
2. Superheater.
(a) Examination of and report on a superheater when cold
where the heating surface is —
(i) not more than 50 sq.m. 60.
(ii) more than 50 sq.m. but not more than 1,000 sq.m. 115.
(iii) more than 1,000 sq.m. 175.
(b) Hydrostatic test on a superheater where the heating
surface is —
(i) not more than 50 sq.m. 35.
(ii) more than 50 sq.m. but not more than 1,000 sq.m. 80.
(iii) more than 1,000 sq.m. 115.
(c) Inspection of a superheater prior to registration 35.
(d) Inspection while a superheater is being installed 35.
(e) Inspection while a superheater is under steam pressure 35.
(f) Inspection of a damaged superheater to determine nature 35.
of repair
(g) Inspection of materials to be used for repair of a 35.
superheater
(h) Inspection while a superheater is being repaired 35.
3. Economiser.
(a) Examination of and report on an economiser when cold
where the heating surface is —
(i) not more than 50 sq.m. 60.
(ii) more than 50 sq.m. but not more than 1,000 sq.m. 115.
(iii) more than 1,000 sq.m. 175.
(b) Hydrostatic test on an economiser where the heating
surface is —
(i) not more than 50 sq.m. 35.
(ii) more than 50 sq.m. but not more than 1,000 sq.m. 80.
(iii) more than 1,000 sq.m. 115.
(c) Inspection of the layout of an economiser prior to 35.
registration
(d) Inspection while an economiser is being installed 35.
(e) Inspection while an economiser is under steam pressure 35.
(f) Inspection of a damaged economiser to determine nature 35.
of repair
(g) Inspection of materials to be used for repair of an 35.
economiser
(h) Inspection while an economiser is being repaired 35.
4. Cast-iron underfired vulcaniser.
-5-
FACTORIES ACT (CHAPTER 104, SECTION 102 (1))
FACTORIES (REGISTRATION AND OTHER SERVICES — FEES AND FORMS) REGULATIONS
-6-
FACTORIES ACT (CHAPTER 104, SECTION 102 (1))
FACTORIES (REGISTRATION AND OTHER SERVICES — FEES AND FORMS) REGULATIONS
-7-
FACTORIES ACT (CHAPTER 104, SECTION 102 (1))
FACTORIES (REGISTRATION AND OTHER SERVICES — FEES AND FORMS) REGULATIONS
-8-
FACTORIES ACT (CHAPTER 104, SECTION 102 (1))
FACTORIES (REGISTRATION AND OTHER SERVICES — FEES AND FORMS) REGULATIONS
SECOND SCHEDULE
Regulation 7
-9-
FACTORIES ACT (CHAPTER 104, SECTION 102 (1))
FACTORIES (REGISTRATION AND OTHER SERVICES — FEES AND FORMS) REGULATIONS
- 10 -
FACTORIES ACT (CHAPTER 104, SECTION 102 (1))
FACTORIES (REGISTRATION AND OTHER SERVICES — FEES AND FORMS) REGULATIONS
- 11 -
FACTORIES ACT (CHAPTER 104, SECTION 102 (1))
FACTORIES (REGISTRATION AND OTHER SERVICES — FEES AND FORMS) REGULATIONS
THIRD SCHEDULE
Regulation 8
No. 000
REPUBLIC OF SINGAPORE
FACTORIES ACT
(CHAPTER 104)
- 12 -