Professional Documents
Culture Documents
Cad 2 Prelim Exercise 5 Pyramid
Cad 2 Prelim Exercise 5 Pyramid
Modeling toolbar :
By default, a pyramid is defined by the center of the base point, a point on the middle of the edge, and
another point that determines the height.
Initially, the default base radius is not set to any value. During a drawing session, the default value for the
base radius is always the previously entered base radius value for any solid primitive.
Edge
Sets the length of the one edge of the pyramid base, as indicated by two points that you specify
Sides
Sets the number of sides for the pyramid. Enter a positive value from 3-32 .
Inscribed
Specifies that the base of the pyramid is inscribed, or drawn within, the base radius.
2Point (height)
Specifies that the height of the pyramid is the distance between two specified points.
Axis endpoint
Specifies the endpoint location for the pyramid axis. This endpoint is the top of the pyramid. The
axis endpoint can be located anywhere in 3D space. The axis endpoint defines the length and
orientation of the pyramid.
Top radius
Specifies the top radius of the pyramid, creating a pyramid frustum.
Initially, the default top radius is not set to any value. During a drawing session, the default value
for the top radius is always the previously entered top radius value for any solid primitive.
2Point. Specifies that the height of the pyramid is the distance between two specified points.
Axis endpoint. Specifies the endpoint location for the pyramid axis. This endpoint is the top of
the pyramid. The axis endpoint can be located anywhere in 3D space. The axis endpoint
defines the length and orientation of the pyramid.