The document discusses specifications for supplying and installing PVC pipes for underground drainage and sewer systems. It provides details on laying pipes in trenches at required gradients and depths between 0.6 to 2 meters. It also lists the quantities and sizes of pipes, manholes, and other items needed for the drainage system, including flanges, bolts, valves, and pits. Rates included excavation, backfilling, pipe laying and other installation work.
The document discusses specifications for supplying and installing PVC pipes for underground drainage and sewer systems. It provides details on laying pipes in trenches at required gradients and depths between 0.6 to 2 meters. It also lists the quantities and sizes of pipes, manholes, and other items needed for the drainage system, including flanges, bolts, valves, and pits. Rates included excavation, backfilling, pipe laying and other installation work.
The document discusses specifications for supplying and installing PVC pipes for underground drainage and sewer systems. It provides details on laying pipes in trenches at required gradients and depths between 0.6 to 2 meters. It also lists the quantities and sizes of pipes, manholes, and other items needed for the drainage system, including flanges, bolts, valves, and pits. Rates included excavation, backfilling, pipe laying and other installation work.
Pressure Polyvinyl chloride ( PVC-U) Pipes for underground drainage and sewerage systems - Confirming to IS 15328:2003 - pipe in trenches to required gradients and provide sand cushion for pipes to the full width of trench above and below the pipe to required minimum thickness etc., complete. rates including exvation in all sorts of soils for laying pipes,forming bottom surface to required level, refilling selected excavated earth around the pipe of 150mm thick, watering, consolidating and disposing off the surplus earth with in the site .The pipe lines to be layed at a depth of 0.6 to 2.0M from formed ground level and as directed by the engineer in charge.(Rate shall include all the complete items,excavation,back filling, pipe laying..etc mentioned above or as directed by EIC)
600 DIA RM 275
500 DIA RM 90 350 DIA RM 400 300 DIA RM 120 250 DIA RM 325
MANHOLE (900x900)-28 NOS +MANHOLE (1200x1200)-12 NOS
DRAIN SUMP PUMP MANIFOLD AREA
ITEM SIZE DESCRIPTION QTY (M/Nos) ITEM SIZE DESCRIPTION QTY (M/Nos) UPVC SOCKET FLANGE, ASTM D1784-UPVC 150#, FF PIPE 24" 15 M FLANGE 10" 4 To ASTM D1785 ASTM D1784-UPVC To ANSI B16.5 SOCKET FLANGE, 150#, FF EPDM RUBBER GASKET,3mm Thk, To FLANGE 24" 4 GASKET 10" 4 ASTM D1784-UPVC ASME B 16.21 To ANSI B16.5 115 LG, Full Length Unc, t\N Two Hexagonal Nuts To ASME EPDM RUBBER GASKET,3mm Thk, To B 18.2.1/18.2.2, GASKET 24" 4 BOLT M24 or 7/8" 48 ASME B 16.21 Stud Bolts, AlloySteel, ASTM A193-B7 /194- 2H, Hot Dip Galvanized 170 LG, Full Length Unc, t\N Two GATE VALVE, CL 150, FF, Hexagonal Nuts To ASME BODY-BS EN1563 : EN-GJS-500-7, B 18.2.1/18.2.2, VALVE (DI BOLT M33 or 1 1/4" 80 10" Trim- SS316L, BB, 2 Stud Bolts, AlloySteel, ASTM A193-B7 VALVE) WEDGE-Ductile iron, EPDM encapsulated /194- 2H, Hot Dip O-RING - NBR RUBBER Galvanized