Professional Documents
Culture Documents
Tokyo Boeki Machinery LTD.: Automated Clinical Analyzer
Tokyo Boeki Machinery LTD.: Automated Clinical Analyzer
C US
REPRESENTED BY
’10.JULY.3000
Improved ease of operation and better test efficiency,
The newest Software makes it possible to
and provides the optimal solution for routine operations,
STAT operation and a broad range of clinical analysis requirements. take usability a step further
The renewal of user friendly software
New convenient functions are available, such as check for inappropriate
calibration results by flag indication compared to the previous results, and
capability of using multiple bottles of the same reagent item on the same tray, etc.
Friendly user-interface
Real-time display of analysis process, reagent residual volume and so on.
LAN connection
Can be connected to an electronic chart of hospital LAN. (Option)
Low noise
Operation noise is reduced by around 20% compared to BIOLIS 24i.
1 2
Improved ease of operation and better test efficiency,
The newest Software makes it possible to
and provides the optimal solution for routine operations,
STAT operation and a broad range of clinical analysis requirements. take usability a step further
The renewal of user friendly software
New convenient functions are available, such as check for inappropriate
calibration results by flag indication compared to the previous results, and
capability of using multiple bottles of the same reagent item on the same tray, etc.
Friendly user-interface
Real-time display of analysis process, reagent residual volume and so on.
LAN connection
Can be connected to an electronic chart of hospital LAN. (Option)
Low noise
Operation noise is reduced by around 20% compared to BIOLIS 24i.
1 2
Front view
❶ Control PCB
❷ Reagent pump
❶
❸ Reagent probe inside
Accuracy features Operation features washing pump
❹ Sample pump
● Individual probes are used for 1st and 2nd reagents to ● Sample cup and primary tube (5, 7, 10 mR) can be used.
avoid carry-over. ❺ Sample probe inside
● Auto-gain function when lamp is replaced. washing pump
● Sample pre-dilution ratio and auto-rerun dilution ratio ● Reaction waste is stored in a dedicated tank.
can be set in advance.
● Test result data are compatible with BIOLIS 24i. ❻ Probe outside washing pump
● Carry-over protection program for reaction cuvettes
and probes.
● Sampling-stop function using END barcode is ❼ Pump for ISE
available.
● Detecting function for contaminated reaction cuvettes ❽ Reagent tray temperature
are available.
● Data base control function is available.
controller
● Reagent cooling is available.
● Improved error list is displayed (compared to BIOLIS
24i).
● Reaction cuvette washing with heated water and 2 ❽ ❷ ❸❹❺❻ ❼
kinds of washing solution (alkaline and acidic) and
● Liquid level alarm for water reservoir and waste liquid
heated water washing for all probes. reservoir is available.
SAMPLE
Reaction cuvette
s 3PECIALLY DEVELOPED TO
UTILIZE AIR PRESSURE MIXING
SYSTEM REAGENT REPEAT
s 4HE MATERIAL IS WATER
REPELLENT PLASTIC
3EMI
DISPOSABLE Advantages of Air Pressure Mixing
ISE sample s .O CARRY
OVER BECAUSE A STIRRER IS NOT USED
inlet s .O WATER CONSUMPTION FOR STIRRER WASHING
s .O DILUTION OF THE REACTION SOLUTION BY WASHING WATER FROM THE STIRRER
Reagent probe
Individual probes are used for Sample tray
1st and 2nd reagents to avoid carry-over. Up to 40 patient samples on board.
Reagent tray (36-sector tray) Both sample cup and primary tube can be used.
24-sector tray available as an option
[A] ISE is Direct Method [B] Consumables of the ISE module as follows
s Throughput is 400 tests/hour including ISE. s Calibrator
s ISE module is equipped with BIOLIS 24i Premium. s Cleaning solution
s It makes easy to replace the electrode. s Electrode (Na, K, Cl, Ref)
3 4
Front view
❶ Control PCB
❷ Reagent pump
❶
❸ Reagent probe inside
Accuracy features Operation features washing pump
❹ Sample pump
● Individual probes are used for 1st and 2nd reagents to ● Sample cup and primary tube (5, 7, 10 mR) can be used.
avoid carry-over. ❺ Sample probe inside
● Auto-gain function when lamp is replaced. washing pump
● Sample pre-dilution ratio and auto-rerun dilution ratio ● Reaction waste is stored in a dedicated tank.
can be set in advance.
● Test result data are compatible with BIOLIS 24i. ❻ Probe outside washing pump
● Carry-over protection program for reaction cuvettes
and probes.
● Sampling-stop function using END barcode is ❼ Pump for ISE
available.
● Detecting function for contaminated reaction cuvettes ❽ Reagent tray temperature
are available.
● Data base control function is available.
controller
● Reagent cooling is available.
● Improved error list is displayed (compared to BIOLIS
24i).
● Reaction cuvette washing with heated water and 2 ❽ ❷ ❸❹❺❻ ❼
kinds of washing solution (alkaline and acidic) and
● Liquid level alarm for water reservoir and waste liquid
heated water washing for all probes. reservoir is available.
SAMPLE
Reaction cuvette
s 3PECIALLY DEVELOPED TO
UTILIZE AIR PRESSURE MIXING
SYSTEM REAGENT REPEAT
s 4HE MATERIAL IS WATER
REPELLENT PLASTIC
3EMI
DISPOSABLE Advantages of Air Pressure Mixing
ISE sample s .O CARRY
OVER BECAUSE A STIRRER IS NOT USED
inlet s .O WATER CONSUMPTION FOR STIRRER WASHING
s .O DILUTION OF THE REACTION SOLUTION BY WASHING WATER FROM THE STIRRER
Reagent probe
Individual probes are used for Sample tray
1st and 2nd reagents to avoid carry-over. Up to 40 patient samples on board.
Reagent tray (36-sector tray) Both sample cup and primary tube can be used.
24-sector tray available as an option
[A] ISE is Direct Method [B] Consumables of the ISE module as follows
s Throughput is 400 tests/hour including ISE. s Calibrator
s ISE module is equipped with BIOLIS 24i Premium. s Cleaning solution
s It makes easy to replace the electrode. s Electrode (Na, K, Cl, Ref)
3 4
Friendly User-interface Specification
5 6
Friendly User-interface Specification
5 6
Automated Clinical Analyzer
C US
REPRESENTED BY
’10.JULY.3000