Professional Documents
Culture Documents
Armacell (Thailand) Limited
88 Mu 4, Donkrabueng, Banpong,
Ratchburi 70110, THIALAND
Tel : +66 (0) 32 353 205‐7 fax: +66 (0) 32 353 208
http://www.armacell.com
SAFETY DATA SHEET
Product: Armaflex 820 Adhesive Page:1/4
1. PRODUCT AND COMPANY IDENTIFICATION
Product name: Armaflex 820 Adhesive
Chemical Identification Polychloroprene and Phenolic resin in mixed hydrocarbon solvents
Supplier: Armacell (THAILAND) Limited
Address: 88 Mu 4, Donkrabueng, Banpong, Ratchburi 70110, Thailand
P.R.China
Telephone: +66 (0) 32 353 205 ‐7
Telefax: +66 (0) 32 353 208
2. COMPOSITION
Hazardous Substance Chemical Formula % by Weight CAS. No.
Chlorprene Rubber C4H5Cl 15‐17 126‐99‐8
Phenolic Resin ‐ 5‐8 91081‐53‐7
Ethyl Acetate C4H8O2 25‐30 141‐78‐6
Acetone CH3COCH3 10‐15 67‐64‐1
Paraffin Mixer C5H12 to C10H22 30‐35 64742‐49‐0
Methyl Benzene C6H5CH3 10‐15 108‐88‐3
3. HAZARDS IDENTIFICATION
Highly inflammable
Heating may cause explosion
Vapor may cause respiratory tract irritation
Splashes may cause eye and skin irritation
4. FIRST‐AID PROCEDURES
Inhalation: Take to fresh air and seek medical attention.
Eye Contact: Immediately flush eyes well with copious amounts of running water for at least 10 minutes, then
seek medical attention.
Armacell (Thailand) Limited
88 Mu 4, Donkrabueng, Banpong,
Ratchburi 70110, THIALAND
Tel : +66 (0) 32 353 205‐7 fax: +66 (0) 32 353 208
http://www.armacell.com
SAFETY DATA SHEET
Product: Armaflex 820 Adhesive Page:1/4
Skin Contact: Wash with a clean rag soaked in Acetone or Ethyl Acetate and then with plenty of water
and soap.
Ingestion: Do not induce vomiting. Consult doctor if complaint persists.
5. FIRE‐FIGHTING PROCEDURES
Suitable Extinguishing Media : Foam, Dry, CO2
Exposure Hazard: Avoid proximity or contact with hot surfaces, flames and sparks. Possible increase of
pressure in sealed containers due to heat. Heating may cause explosion.
Special Equipment : Pressure demand self contained breathing apparatus should be provided to fire fighters
in building or confined area where this material is stored. Do not use water in a jet.
6. ACCIDENTAL RELEASE PRECEDURES
Precautions with respect to individuals : Ventilate working area.
Remove sources of ignition.
Avoid contact with skin, eyes, and clothing.
Precaution with respect to environment: Avoid discharge into the environment.
Cleaning up spillage: Collect the product in inert filler (sand, sawdust) and put it in marked
closed containers.
7. STORAGE AND HANDLING
Storage: Do not expose to direct sunlight. Keep in a well ventilated place. Store away from heat sources,
avoid static build up, must be earthed.
Handling: Keep containers tightly closed. Do not eat, drink or smoke when handling.
Armacell (Thailand) Limited
88 Mu 4, Donkrabueng, Banpong,
Ratchburi 70110, THIALAND
Tel : +66 (0) 32 353 205‐7 fax: +66 (0) 32 353 208
http://www.armacell.com
SAFETY DATA SHEET
Product: Armaflex 820 Adhesive Page:1/4
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Information on the system design: Ensure for good ventilation/suction.
Individual Protection
‐ Respiration : Ensure adequate ventilation.
‐ Hand: Wear protective gloves while working.
‐ Eyes: Safety glasses are recommended.
‐ Skin: Wear suitable protective clothing.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state: Viscous Fluid
Color: Black‐Blue
Odor: Characteristic organic solvent
Viscosity (30°C): 350 – 400 CPS
Solid contents: 19.0 – 20.0 %
Solubility in water (20°C): Insoluble
Solubility in solvent (20°C): Acetone, Ethyl acetate, Toluene
10. STABILITY AND REACTIVITY
Condition to avoid: Keep away from direct to sunlight or high temperature. Close tight
after use.
Materials to avoid: Avoid contaminating with water or humidity.
Hazardous decomposition products: Aliphatic Hydrocarbons
11. TOXICOLOGICAL INFORMATION
Information on the component: Contain Methyl Benzene
12. ECOLOGICAL INFORMATION
Persistence and Degradability: The product may not be released into the environment.
Armacell (Thailand) Limited
88 Mu 4, Donkrabueng, Banpong,
Ratchburi 70110, THIALAND
Tel : +66 (0) 32 353 205‐7 fax: +66 (0) 32 353 208
http://www.armacell.com
SAFETY DATA SHEET
Product: Armaflex 820 Adhesive Page:1/4
13. DISPOSAL CONSIDERATIONS
Elimination by incineration is recommended. After mixing with an inert filler (sawdust, sand), treat as a solid
industrial waste in agreement with local, regional and national legislation..
14. TRANSPORTATION INFORMATION
UN Number: 1866
IMDG: 3,2
IATA: 3
15. REGULATORY INFORMATION.
International Inventory Status Einecs: May be commercialized according to EEC/92/32 directive.
16. OTHER INFORMATION
This information is based on our current level of knowledge and related to the product in the state in which it is delivered.
It is intended to describe our product from the point of the view of safety requirements and is not intended to guarantee
any particular properties.
End of document.
Number of pages: 4